Mur
Wall
Kenneth Gifford
a ajouté un nouvel album photo.
a ajouté un nouvel album photo.
7 13 March, 02:34
Bill Newcomer
How has it been going together? I built the Heavy Hugger version back in the 70's.
How has it been going together? I built the Heavy Hugger version back in the 70's.
23 March, 05:15
Kenneth Gifford
It's gone together perfectly. The biggest complaint is the sprue connections on the chrome parts, I think I could say that about any auto kit though.
It's gone together perfectly. The biggest complaint is the sprue connections on the chrome parts, I think I could say that about any auto kit though.
23 March, 13:34
March 21, 2024
March 18, 2024
March 17, 2024
March 15, 2024
March 13, 2024
March 11, 2024
Kenneth Gifford
a ajouté un nouvel album photo.
a ajouté un nouvel album photo.
All comments (17) » 17 21 February, 17:56
Christian W
I never saw them so far. I can't remember that they are in the box at all.
I never saw them so far. I can't remember that they are in the box at all.
11 March, 21:26
March 10, 2024
March 9, 2024
March 5, 2024
March 3, 2024
Kenneth Gifford
possède cet article
possède cet article
Bronco Half Cab with dune buggy & trailer
Revell 1:25
85-7228 2021 Ensemble de modèles Multi sujets (1!!)3 March, 00:40
Kenneth Gifford
possède cet article
possède cet article
Bronco Half Cab with dune buggy & trailer
Revell 1:25
85-7228 2021 Ensemble de modèles Multi sujets (1!!)3 March, 00:39
February 26, 2024
Kenneth Gifford
Kit number for a the falcon modified stocker is misprinted on side panel.
Kit number for a the falcon modified stocker is misprinted on side panel.
26 February, 20:20
Kenneth Gifford
possède cet article
possède cet article
25 February, 19:05
Bozzer
I was thinking about converting mine, back into a school bus? Can't be too hard, right?
I was thinking about converting mine, back into a school bus? Can't be too hard, right?
25 February, 23:04
Kenneth Gifford
Just chop the hood off and lower it back to normal height I would guess. The kit is almost as old as me so I think it will go on the collectable shelf.
Just chop the hood off and lower it back to normal height I would guess. The kit is almost as old as me so I think it will go on the collectable shelf.
26 February, 11:51
Bozzer
I was thinking similar mate. Creating the interior, should be interesting. I'll do my research on that. Basically, I'll be building a bus, based on the shell. Everything will be scratchbuilt.
I was thinking similar mate. Creating the interior, should be interesting. I'll do my research on that. Basically, I'll be building a bus, based on the shell. Everything will be scratchbuilt.
26 February, 12:15
February 24, 2024
February 23, 2024
Kenneth Gifford
a ajouté un nouvel album photo.
a ajouté un nouvel album photo.
71 Mustang Mach 1
25 images
1:25
No stripes because they were too brittle to use.
Projet: 1971 Ford Mustang Mach 1
9 1 February, 18:26
February 22, 2024
February 21, 2024
February 19, 2024
February 18, 2024
February 16, 2024
February 11, 2024
February 10, 2024
February 7, 2024
February 2, 2024
Kenneth Gifford
possède cet article
possède cet article
1966 Dodge L700 Truck w/Flatbed Racing Trailer
AMT 1:25
1368 2023 Nouveaux décalcomanies Multi sujets (1!!)2 February, 17:21
Bozzer
Kenneth, I'd proceed with caution, on the tractor unit.
This is the old Lindberg kit, and the chassis is plagued with issues!
Basically, the front and rear suspension, are located in the wrong place.
My honest, and friendly advice is, to research the tractor unit, and seek as much information, as you can?
I got this dodge, for my wife, to build as her first semi.
Thankfully, she still talks to me! It took me 4000 miles and a lot of creeping, to realise that she wasn't an idiot, and it's truly a tricky kit!
People mention that the door hinges are a problem, but I wouldn't even touch any paint, until you can assure yourself, that the chassis is correct 100% 👍
Kenneth, I'd proceed with caution, on the tractor unit.
This is the old Lindberg kit, and the chassis is plagued with issues!
Basically, the front and rear suspension, are located in the wrong place.
My honest, and friendly advice is, to research the tractor unit, and seek as much information, as you can?
I got this dodge, for my wife, to build as her first semi.
Thankfully, she still talks to me! It took me 4000 miles and a lot of creeping, to realise that she wasn't an idiot, and it's truly a tricky kit!
People mention that the door hinges are a problem, but I wouldn't even touch any paint, until you can assure yourself, that the chassis is correct 100% 👍
2 February, 19:36
February 1, 2024
January 29, 2024
January 26, 2024
January 24, 2024
January 23, 2024
January 21, 2024
January 14, 2024
January 9, 2024
January 7, 2024
Kenneth Gifford
possède cet article
possède cet article
6 January, 20:49
Kenneth Gifford
Found it at a flea market for 10$ a couple bits started but complete minus 1 upper sleeper window. I think I can make it work. My brother, who is much more versed in model trucks than I am, says this is art's worst attempt at a truck kit ever. He says nothing lines up and lots of warp issues. I'll find out if I ever build it I guess.
Found it at a flea market for 10$ a couple bits started but complete minus 1 upper sleeper window. I think I can make it work. My brother, who is much more versed in model trucks than I am, says this is art's worst attempt at a truck kit ever. He says nothing lines up and lots of warp issues. I'll find out if I ever build it I guess.
7 January, 18:01
Bozzer
From what I've witnessed, it's a much better kit than the Revell T-600. That kit is just a mash up of other Revell kits. I've seen the AMT version built, and it looks good. Obviously, as with all AMT stuff, there's issues. I have both versions of this, and I hope to get around to doing at least one of them, next year. I'm sure that you'll do this one justice, mate 👍
From what I've witnessed, it's a much better kit than the Revell T-600. That kit is just a mash up of other Revell kits. I've seen the AMT version built, and it looks good. Obviously, as with all AMT stuff, there's issues. I have both versions of this, and I hope to get around to doing at least one of them, next year. I'm sure that you'll do this one justice, mate 👍
7 January, 18:45
Kenneth Gifford
possède cet article
possède cet article
Larry Minor Racing
McDonald's Olds Funny Car 1992 NHRA Funny Car Champion Revell 1:24
7353 1993 Nouveaux décalcomanies 7 January, 18:10
January 6, 2024
January 5, 2024
December 31, 2023
Kenneth Gifford
possède cet article
possède cet article
Coca-Cola
1972 Chevy Fleetside w/Coca-Cola Vending Machine & Crates AMT 1:25
AMT1231M/12 2021 Nouveaux décalcomanies 31 December 2023, 19:35
Kenneth Gifford
possède cet article
possède cet article
Coca-Cola
1972 Chevy Fleetside w/Coca-Cola Vending Machine & Crates AMT 1:25
AMT1231M/12 2021 Nouveaux décalcomanies 31 December 2023, 19:07
December 23, 2023
December 22, 2023
December 20, 2023
December 11, 2023
December 5, 2023
December 2, 2023
November 30, 2023
Kenneth Gifford
a ajouté un nouvel album photo.
a ajouté un nouvel album photo.
All comments (5) » 13 22 November 2023, 02:21
Kenneth Gifford
I ended up just cutting the hinges off the doors and just glittering them closed. The windshield had to be trimmed down rather drastically to and bottom as well. I guess I really don't understand why they attempted to make opening doors on this truck to begin with, there's nothing to see inside. On to the next one!
I ended up just cutting the hinges off the doors and just glittering them closed. The windshield had to be trimmed down rather drastically to and bottom as well. I guess I really don't understand why they attempted to make opening doors on this truck to begin with, there's nothing to see inside. On to the next one!
30 November 2023, 02:13
November 27, 2023
November 24, 2023
November 23, 2023
Kenneth Gifford
a ajouté un nouvel album photo.
a ajouté un nouvel album photo.
All comments (10) » 24 5 November 2023, 23:11
Kenneth Gifford
Thanks all. Yeah 2 and a half weeks I guess. I usually don't get to the bench during the week and I let the body sit and cure the blue for a week before I masked it for the silver. The camera helps the quality, there are several boo boos on it. I just like building.
Thanks all. Yeah 2 and a half weeks I guess. I usually don't get to the bench during the week and I let the body sit and cure the blue for a week before I masked it for the silver. The camera helps the quality, there are several boo boos on it. I just like building.
22 November 2023, 22:19
Bill Newcomer
I am lucky if I get a sub assembly done in 2.5 weeks. Of course, building 4-5-6 at a time causes bench time to be split up. It does however, keep fingerprints out of the paint.
I am lucky if I get a sub assembly done in 2.5 weeks. Of course, building 4-5-6 at a time causes bench time to be split up. It does however, keep fingerprints out of the paint.
23 November 2023, 04:56
November 22, 2023
Kenneth Gifford
possède cet article
possède cet article
Gift Set
Muscle Car '66 Fairlane, '68 Roadrunner, '65 GTO AMT/ERTL 1:25
8123 1992 Changé ? Multi sujets (3)22 November 2023, 21:14
wnolder.php?lang=fr
2023-11-22 21:14:27
2021-04-24 22:14:00
97031
/ajax/wnolder.php?lang=fr&sd=2023-11-22 21:14:27&md=2021-04-24 22:14:00&filter=&w=97031
todo