1:8 Pocher Rolls Royce Phantom II

1
September 7, 2018
2
September 7, 2018
3
September 7, 2018
4
September 5, 2018
5
September 5, 2018
6
September 5, 2018
7
September 7, 2018
8
September 5, 2018
9
September 5, 2018
10
September 5, 2018
11
September 5, 2018
12
September 5, 2018
The starting carburetor was missing, I made it using some pipes.
13
September 9, 2018
all the oil lines were missing, I made them using copper wire and nuts
14
September 9, 2018
15
September 5, 2018
16
September 5, 2018
17
September 5, 2018
18
September 5, 2018
19
September 5, 2018
20
September 5, 2018
21
September 5, 2018
22
September 5, 2018
23
September 5, 2018
24
September 5, 2018
There was only a hole in the spark plug to put the wire, so I made the connection using a brass tube, nut and bolt
25
September 5, 2018
26
September 7, 2018
27
September 7, 2018
28
September 7, 2018
29
September 7, 2018
30
September 5, 2018
31
September 5, 2018
32
September 5, 2018
33
September 5, 2018
34
September 5, 2018
35
September 5, 2018
36
September 5, 2018
37
September 5, 2018
38
September 6, 2018
39
September 6, 2018
40
September 5, 2018
41
September 5, 2018
42
September 5, 2018
43
September 6, 2018
44
September 6, 2018
45
September 6, 2018
46
September 6, 2018
47
September 7, 2018
48
September 7, 2018
49
September 7, 2018
50
September 7, 2018
51
September 7, 2018
52
September 7, 2018
53
September 7, 2018
54
September 7, 2018
55
September 7, 2018
56
September 7, 2018
57
September 7, 2018
58
September 7, 2018
59
September 13, 2018
The leaf springs
60
September 13, 2018
61
September 13, 2018
62
September 13, 2018
63
September 13, 2018
Rear axle
64
September 13, 2018
65
September 13, 2018
66
September 13, 2018
67
September 13, 2018
Rear brakes
68
September 13, 2018
69
September 13, 2018
Front brakes
70
September 13, 2018
Front axle
71
September 13, 2018
72
September 13, 2018
73
September 13, 2018
74
October 23, 2018
The tie rod and the shackle in the kit are in this way
75
October 23, 2018
76
October 23, 2018
77
October 23, 2018
So, I decided to modify them
78
October 23, 2018
79
October 23, 2018
80
October 23, 2018
81
October 23, 2018
82
October 23, 2018
83
October 23, 2018
84
October 23, 2018
85
October 25, 2018
it's time to assembly the chassis...
86
October 25, 2018
87
October 25, 2018
The brakes levers
88
October 25, 2018
89
October 25, 2018
90
October 25, 2018
91
October 25, 2018
92
October 25, 2018
93
October 25, 2018
94
October 25, 2018
95
October 25, 2018
96
October 25, 2018
97
October 25, 2018
98
October 25, 2018
99
October 25, 2018
100
October 25, 2018
101
October 25, 2018
102
October 25, 2018
the gear box
103
October 25, 2018
transmission shaft and differential box
104
October 25, 2018
output of gear box
105
October 29, 2018
The exhaust system. Heat protection.
106
October 29, 2018
107
October 29, 2018
108
October 29, 2018
109
October 29, 2018
110
October 29, 2018
The support of the final tube as in the box
111
October 29, 2018
112
October 29, 2018
113
October 29, 2018
and the new one
114
October 29, 2018
115
October 29, 2018
116
October 29, 2018
117
October 29, 2018
118
October 29, 2018
119
October 29, 2018
120
October 29, 2018
121
January 10, 2019
122
January 10, 2019
123
January 10, 2019
124
January 10, 2019
125
January 10, 2019
126
January 10, 2019
127
January 10, 2019
128
January 10, 2019
wheel composition
129
January 10, 2019
The hub composition
130
May 6, 2020
I restart with the dashboard
131
May 6, 2020
132
May 6, 2020
133
May 6, 2020
134
May 6, 2020
135
May 6, 2020
I don't like the instruments included in the kit
136
May 6, 2020
so I made them using AutoCAD
137
May 6, 2020
138
May 6, 2020
139
May 6, 2020
140
May 6, 2020
141
May 6, 2020
142
May 6, 2020
143
May 6, 2020
144
May 6, 2020
145
May 6, 2020
146
May 6, 2020
The supports for the dashboard
147
May 6, 2020
148
May 6, 2020
149
May 6, 2020
The connection to power box
150
May 6, 2020
151
May 6, 2020
152
May 6, 2020
the firewall
153
May 6, 2020
154
May 6, 2020
155
May 6, 2020
156
May 6, 2020
157
May 6, 2020
158
May 6, 2020
the support of the pump
159
May 6, 2020
160
May 6, 2020
161
May 6, 2020
162
May 6, 2020
163
May 6, 2020
164
May 6, 2020
165
May 6, 2020
166
May 6, 2020
the final result of pump
167
May 6, 2020
168
May 6, 2020
169
May 6, 2020
The cap of the grease pump for the chassis
170
May 6, 2020
171
May 6, 2020
the two pumps
172
May 6, 2020
173
May 6, 2020
fuel supply switch
174
May 6, 2020
175
May 6, 2020
176
May 6, 2020
a first test for the body
177
May 6, 2020
178
May 6, 2020
179
May 6, 2020
180
May 6, 2020
181
May 6, 2020
182
May 13, 2020
the connection for the gear lever
183
May 13, 2020
the speedometer cable
184
May 13, 2020
and the accelerator cable, pedal connection
185
May 13, 2020
the side steering tube, before...
186
May 13, 2020
and after
187
May 13, 2020
steering arm
188
May 13, 2020
the controls on instruments panel
189
May 13, 2020
190
May 13, 2020
the connections of dashboard
191
May 13, 2020
192
May 13, 2020
193
May 13, 2020
the firewall with the pipes connected to the pumps
194
May 13, 2020
the silencer from the exhaust heated inlet pipe
195
May 13, 2020
the magneto control linkage
196
May 13, 2020
the magneto control linkage in place
197
May 13, 2020
198
May 13, 2020
199
May 13, 2020
On the steering wheel there are three controls: ignition, governor and carburator. Instead of use the the words write on the plastic I prefer to print them and glue on the plate. I made them by AutoCAD, te leteers are 0,9 and 0,7 mm.
200
May 13, 2020
201
May 13, 2020
202
May 13, 2020
203
May 13, 2020
This is only a test, I have to use a laser print to have a good detail (my printer is a cheap inkjet).
204
January 6, 2023
205
January 6, 2023
206
May 15, 2020
It' time to work on the radiator
207
May 15, 2020
208
May 15, 2020
Drill for the new nuts and bolts
209
May 15, 2020
210
May 15, 2020
211
May 15, 2020
this is the motor side
212
May 15, 2020
213
May 15, 2020
214
May 15, 2020
the flying lady is in her place
215
May 15, 2020
216
May 15, 2020
HELP! How can I rotate the image?
217
May 15, 2020
218
May 15, 2020
219
May 15, 2020
220
May 15, 2020
The three plates for radiator and bumpers. The two R are red not black, because the carburetor on the model is of the type produced until January 1932.
221
May 15, 2020
222
May 15, 2020
223
May 15, 2020
224
May 15, 2020
225
May 15, 2020
226
January 6, 2023
227
January 6, 2023
The old clamps...
228
January 6, 2023
And the new.
229
January 6, 2023
230
January 6, 2023
231
January 6, 2023
I modified also the clamps on the exhaust
232
January 6, 2023
233
January 6, 2023
The grid of gear box
234
January 6, 2023
235
January 6, 2023
236
August 2, 2023
Sometimes I come back to my work... I started with the seats, using leather to cover them.
237
August 2, 2023
238
August 2, 2023
239
August 2, 2023
240
August 2, 2023
241
August 2, 2023
242
August 2, 2023
243
August 2, 2023
244
August 2, 2023
245
August 2, 2023
246
August 2, 2023
247
August 2, 2023
248
August 2, 2023
249
August 2, 2023
250
August 2, 2023
The color of the body will change, I think to paint the car in metallic light blue.
251
August 2, 2023
This is my inspiration, is one of the first car in metallic color.

Comentarios

15 5 September 2018, 12:46

Urban Gardini
Looks like a real engine. Lovely work so far!

6 September 2018, 23:42

Alec K
Wow! I read about this Pocher kit as kid. Looking forward to seeing it built 👍

7 September 2018, 01:47

Spanjaard
amazing job on that engine!!

7 September 2018, 21:39

Maurizio Pessina
Thanks guys. I work on this kit since 2014, but I do not spend a lot of time with it. Now it is almost a year that I do nothing...

7 September 2018, 22:15

Spanjaard
no rush 🙂

9 September 2018, 19:17

Alexander Grivonev
Holy mother of.....
the old Pocher kits truly are something 👍

9 September 2018, 19:50

Peter Hardy
You're effing kidding me! Alex? Lift your game!! Maurizio's making you look a bit pedestrian!!

9 September 2018, 23:58

Alexander Grivonev
@Peter 😄😄 that hit hard, i'm goin to roll up in a fetal position and cry for a while now!

10 September 2018, 11:36

Peter Hardy
Gots hankies here if you need them!

10 September 2018, 20:55

Spanjaard
this user should be banned... enough of posting pictures of real engines and try to make them pass as models 😛

12 September 2018, 23:46

Alexander Grivonev
I am losing track how much of this is the kit and how much Maurizio's craftsmanship. Either way truly mindblowing!! I am going to be disappointed if this thing does not start up in the end😄

30 October 2018, 09:11

Maurizio Pessina
Thanks! I don't know when I'll finish, I work there occasionally, and I have to resist not starting another kit before I finish this! 🙂

30 October 2018, 12:28

Peter Hardy
What's happing with the Phantom II? You have been very quiet and I need my Maurizio fix!

7 January 2019, 08:18

Paulo Almeida
And I need to hear the motor running! Wow, great work!

7 January 2019, 08:49

Alec K
Same here. I hope Mauricio did not start another kit 😮

7 January 2019, 13:20

Maurizio Pessina
Hi guys, thanks for your interesting! I'm not starting another kit, I'm only a little bit lazy... During this time I made the wheels, as you can see!

10 January 2019, 19:13

Alec K
Excellent 👍

11 January 2019, 11:42

Peter Hardy
Maurizio, wheels are looking fantastic and look like fun to build. If I ever get to Italy I will buy you a coffee so you will tell me all your secrets!

11 January 2019, 22:53

Chris Greathouse
*takes a seat* I'm in, looking fantastic.... it looks wheely good!

11 January 2019, 22:58

Maurizio Pessina
Peter, I don't tell you nothing for a coffe, but for a beer... I'll wait!

24 January 2019, 23:07

Peter Hardy
Beer eh? Hmmm, that might be possible! Anyone else interested in sitting in the afternoon sun at Maurizio's place if I bring the beer? Italy should be very pleasant this time of year!

25 January 2019, 07:50

Alec K
I say we wait a bit into Spring for the pleasantness 😄. I'll take a glass of a nice supertuscan 👍

25 January 2019, 12:34

Maurizio Pessina
Yes, now is cold, better end of Spring, and you have time to stock beers!!!

25 January 2019, 13:22

Peter Hardy
I might need a truckload if Alec is turning up!

25 January 2019, 20:57

Maurizio Pessina
Hi guys, I'm back!I hope that all is going well for you and your dears.

6 May 2020, 20:52

Chris Greathouse
Hello, nice to meet you, I'm on for the ride 🙂

6 May 2020, 21:01

Peter Hardy
Mauri! Welcome home! We have been worried about you!

6 May 2020, 22:24

Alexander Grivonev
This is simply ridiculous, in a good way 👍

7 May 2020, 09:17

Alec K
Yes, welcome back! What a change since we chatted last on this thread, and I don't mean just your progress on the build...

7 May 2020, 12:41

Maurizio Pessina
Alec you are right, the world is changed. Luckily we have our hobby. Peter, we have to wait for the beer! Alexander, have you buy a F40 Pocher? Me too have it, is red but I think to make it yellow, when I'll start to assemble it... Ciao Chris, I'm happy to meet you again

8 May 2020, 00:04

Alexander Grivonev
Yeah, have the F40 in my stash but I believe these newer Pocher kits are toys in comparison to the madness like your RR 😄
Built the Aventador though, was quite nice actually but also nowhere near the detail amount like the older kits

8 May 2020, 18:23

Peter Hardy
Gentlemen, for those of us out here learning to super detail thank you for showing us how it is done!

8 May 2020, 22:51

Chaz Gordon
Put some gas in the tank and that's goi9ng to fire up first turn.

9 May 2020, 01:21

Maurizio Pessina
Alexander, yes, the Pocher "Prestige" series made as in the box are like die cast model, but adding details and right paint it's possible to achieve a good result. I think it's not a problem for you, your Countach is fantastic!

11 May 2020, 13:09

Maurizio Pessina
thanks Chaz, have you try the same on your Mosquito?

11 May 2020, 13:13

Chaz Gordon
The Mossie is just a careful OOB build, nothing on the level of this Roller. But thanks.

12 May 2020, 01:10

Spanjaard
i will be disappointed if the engine does not start when this baby is done! wow!!!

15 May 2020, 21:27

Alec K
This thing is just awesome...

16 May 2020, 01:40

Tom ...
Beautiful!

24 May 2020, 00:52

Spanjaard
If you still need help to rotate images, go to album, go to manage, click on advanced and choose the right orientation for the picture

6 January 2023, 14:53

Maurizio Pessina
Thanks, I saw that some options have been changed!

6 January 2023, 14:59

Alec K
So glad to see this project still going. Magnificent 👍

6 January 2023, 15:15

Robert Podkoński
Awesome work so far!

6 January 2023, 17:32

Michael Kohl
Massive and very nice detailling on your part. Please allow me a comment on one detail. Pic 239: one of your beautifully fashioned clamps seems to be on the rubber hose only, but not on the metal part the hose is slid over. On this position it will not serve its function.
Keep up the great work and us pisted.

7 January 2023, 08:37