A-6 "Intruder" , EA-6 "Prowler" wheels set

ResKit | Nr. RS32-0001 | 1:32

Fakten

Marke:: ResKit
Titel:: A-6 "Intruder" , EA-6 "Prowler" wheels set
Nummer:: RS32-0001
Maßstab:: 1:32
Typ:: Detaillierungs Set
Erschienen:: 2020 Neue Bausatzform
Barcode:: 4589913295353 (EAN)
Thema:: Grumman A-6 Intruder » Jets (Flugzeuge)

Entworfen für

Dieses Zubehörset wurde entwickelt für:

Trumpeter

2013

2014

Neue Bausatzform

Neue Bauteile

Marktplatz

Onlineshops

USD 15.23Ausverkauft »

€ 15.18

USD 17.90Ausverkauft »

¥ 1836

USD 15.25Ausverkauft »

Alternative SKUs für ResKit RS32-0001:
RS320001 | 32-0001 | RES-RS32-0001 | RESRS320001

Hinweis: Preise und Verfügbarkeit sind nur Richtwerte. Überprüfen Sie auch, ob das Produkt tatsächlich passt!

Bausatzvorstellungen

Externe Bewertungen

Wir kennen keine In-Box-Vorstellungen für dieses Produkt A-6 "Intruder" , EA-6 "Prowler" wheels set (#RS32-0001) von ResKit.

Kommentare

Jon Somerville
The holes for the wheels do not line up for the only kit in 1/32. My guess is that these are accurate to the real thing and not designed to fit the kit. So which do you prefer? I would have liked to see if fit the kit. Used drill bits to match a fitting hole to the original wheel parts and then drilled out the resin. The cut line to remove the casting block for the front wheels are correct, but not the mains.

Alle Kommentare (10) » 1 19 April 2021, 15:43

Jon Somerville Autor
I bought the MERs from ResKit. That was the one thing I was glad about that I waited so long before finishing the kit. Toyed with the idea of fixing the tail comb myself, but was going to be too much work for only a little gain.
Other issues with the kit is where the aft side of where the nose gear joins the fuselage is way to deep into the gear bay. The wing fences are not in the correct spot and the fuselage has way too many rivets. I filled the rivets where needed. If they ghost a bit, that's okay too.

19 December 2023, 13:44

Jon Somerville Autor
Now that I re-read the last line in the review should really be "The cut line to remove the casting block for the front wheels hubs is correct, but not the mains." So referring to the hubs not the wheels themselves.

25 January 2024, 17:38

Referenzmaterial

Grumman A-6 Intruder & EA-6B Prowler

Warpaint Nr. 146

Andy Evans

2025

Grumman A-6 Intruder (Phoenix Scale Publications 18)

Grumman A-6 Intruder Airmark In Profile & In Scale

Modellers Airguide Nr. 18

Andy Evans

2024

Alle Bücher » (29 im Total) Alle Walkarounds » (15 im Total)