Zeď
Wall
Christian Wpřidal nové fotoalbum.
18 obrázky
1993 Dodge Stealth R/T Turbo - wip
1:25
Hitting the finish line
Projekt: 1993 Dodge Stealth R/T Turbo
Všechny komentáře (13) » 9 20 February, 14:37
Christian W AutorThank you! I'm aming for a layer of clear cote or a second layer of black after wetsamding. There are some dust and blunt spots. The roof is not theat shiny like the sides for example.
29 April, 06:39
Christian W AutorThe most things are painted. The Dodge is ready to get together. I decided to paint the engine compartment in a middle gray to get some contrast to the boda. The instructions also "said", that the engine is black all over. That is to boring so I painted some parts differently. Also the interior. Searching the net, is wouöd be lame too. Just tan and only the dashboard ans center console satin black. I tried to mix that up by using three different colors for the interior. The seats are a little more shiny than the carpet or trunk space. I think I'll give them another layer of clear cote to get it more visible.
6 May, 04:14
Christian Wpřidal nové fotoalbum.
Všechny komentáře (6) » 9 29 April, 06:52
Christian W AutorI try my best 🙂 My other grandchild (also 6 and a boy) has interest in all the "nice boxes and cars" but is not that he wants to try to build one. He is more happy with die casts. All of my grandchilds got easy kits for christmas and they enjoyed it. It was a try for me to see, how they react and how satisfied they are. It was all right.
It is important, that I will have someone, who wants to take over my stash 🙂
1 5 May, 07:54
Christian W AutorThis kit is done. I'm happy with it and it is a nice variety. Not only, that this car mostly is black. The colors are always a good combination.
1 6 May, 04:05
May 3, 2025
April 28, 2025
Christian WThere are two problems with this kit:
a) - The kit number. The same number pops up with this Dino 246GT (Fujimi 08256, 1:24). And I think, the number for the GTO is not right because I can't find any kit for sale which is the 288 GTO.
b) - It is said, that the kit contains "AcuStion" photo etched parts but there is nothing written on the box as usually.
Maybe someone can proof this or that.
2 April, 06:10
April 25, 2025
Christian WIs it possible, that this kit is based on the kit by airfix (Formula Firebird (USAirfix 8054, 1:24) / first row, picture in the middle) but with the wheels of another kit by airfix (Fire Ball Firebird (USAirfix 8050, 1:24) / also on the first picture, second row on the left)
It could be Lindberg (Pontiac Firebird (Lindberg 6503, 1:24)) but they didn't offer any kit with those rims.
25 April, 08:28
Christian Wchce tohle
Muscle Cars '80 Corvette, '80 Camaro, '80 Firebird
Testors 1:24
408678 2004 Nová krabice Multitéma (3)25 April, 08:17
April 24, 2025
Christian WIf you look for an instruction sheet, you could take those two:
Blackbird (MPC/Ertl 6332, 1:25)
1977 Pontiac Firebird T/A (MPC 916, 1:25)
It's still the same kit 🙂
24 April, 09:43
Christian WIf you look for an instruction sheet, you could take those two:
Blackbird (MPC/Ertl 6332, 1:25)
1977 Pontiac Firebird T/A (MPC 916, 1:25)
24 April, 09:43
Christian WPay attention! The instructions are NOT from this kit. They belong to Revells Bandit Trans Am (Smokey and the Bandit (Revell 85-4027, 1:25)) This kit is totally different!
As an orientation, you could peek into the base kit of the 1980s or newest issue:
Blackbird (MPC/Ertl 6332, 1:25)
1977 Pontiac Firebird T/A (MPC 916, 1:25)
24 April, 09:38
Christian WThe differences to the kit with the gold plated parts (Trans-Am Blackbird (MPC 1-0777, 1:25)):
- the T-Tops are cut out and they are seperate parts ( not molded into the body)
- the T-Tops show the "Hurst T-Tops". They are smaller
- the decals are different. The screeming chicken looks higher
- and of cause: chrome platetd parts instead of gold
1 24 April, 09:23
Christian WGold plated parts
1 17 December 2017, 00:09
Christian W AutorThe differences to the kit Trans-Am Blackbird (MPC 1-0777, 1:25):
- the T-Tops are molded into the body (no cut outs and seperate parts)
- the T-Tops are made "Fisherbody" (no "Hurst-T-Tops" anymore) -> they are larger
- the decals are different. The screeming chicken looks lower
- the chrome plated parts are golden (see the "sticker" on the box art)
24 April, 09:19
April 6, 2025
April 1, 2025
March 28, 2025
Christian WPay attention to the decals for the break callipers. The instruction sheet has a printing misstake. For step 38 and 39 is printed to use decal #54. That is wrong.
Step 38 - front: decals #54
Step 39 - rear: decals #58
[img1]
28 March, 08:36
March 24, 2025
Christian WMaybe I'm nit picking: why there are strickers on both plates (in the upper corners)? As far as I know, those stickers are only on the rear plates because some states have "rear-plates-only"-regulations (Arkansas, Delaware, Florida and Georgia for example and they all are gathered on this one sheet).
I'm from Germany and why do I know that better? Because of better research! I expect more precision from manufacturers here. I wouldn't spend my money on something like that. Sorry. Failed.
2 24 March, 07:26
March 21, 2025
Christian Wpřidal nové fotoalbum.
Všechny komentáře (14) » 13 16 October 2018, 04:21
Christian W Autor🙂 Thank you 🙂 Each of us should have his / her own car on the desk.
23 November 2018, 06:26
March 18, 2025
March 16, 2025
Christian WAdded a new review for:
60‘~70’s Saigon Shuttle Motor-Tricycle Depot and a take break drive [2 kits In 1 box]
Gecko Models 1:35
35GM0113 2024 Nové díly 
Kontrola v krabici
kitreviewsonline.de
16 March, 16:55
March 11, 2025
February 24, 2025
February 23, 2025
February 20, 2025
Christian Wpřidal nové fotoalbum.
8 18 June 2019, 11:42
Christian W AutorThank you very much, mates! When I look at the pictures, then I notice, that those are taken in June 2019 oO ! Damned, I need an a$$ kick to get my hands to it again. I look at it often in my shelf / closet but never thought about it, how long it sits there already.
Thank you for that wakeup call!
20 February, 14:54
February 19, 2025
Christian Wpřidal nové fotoalbum.
This album no longer exists
9 obrázky
1975 Citroën 2CV Fourgonette AK 250 - GalleryThis album does not contain any images.
1:24
Projekt: 1975 Citroën 2CV Fourgonette AK 250
11 19 February, 11:35
February 10, 2025
Christian Wpřidal nové fotoalbum.
Všechny komentáře (7) » 8 14 January, 05:19
Jakko Suspensions on wheeled armoured vehicles are always a lot of work — funnily enough, tracked vehicles are often actually simpler to build, even though they have many more wheels. Soft-skins like big military trucks are even more involved, BTW: the suspension is just as complicated as on wheeled AFVs but there are a ton more parts for the chassis, drive train, etc.
16 January, 11:37
February 8, 2025
February 6, 2025
February 4, 2025
February 3, 2025
January 30, 2025
January 28, 2025
Christian WPay attention to the boxart! It has another text in the star: "Golden Opportunity Kit" ...
Boxart of #6360 by 1989 (c) says: "2 in 1 Build 1 of 2 Kits Stock Custom"
75 Corvette Convertible (MPC 6360, 1:25)
28 January, 05:46
Christian WPay attention to the boxart! It has another text in the star: "2 in 1 Build 1 of 2 Kits Stock Custom" ...
Boxart of #6360 by 1988 (c) says: "Golden Opportunity Kit"
75 Corvette Convertible (MPC 6360, 1:25)
28 January, 05:46
January 27, 2025
January 26, 2025
January 20, 2025
January 16, 2025
Christian WPay attention to the instruction sheet! There are missprints in it.
Step 11 - Change Part B9 with B8 ([img1])
Step 12 - Change Part B8 with B9 ([img2])
Step 13 - Change Part C18 with C17 ([img3])
Step 14 - Change Part B7 with B6 ([img4])
Step 16 - Change Part C17 with C18 ([img5])
Step 17 - Change Part B6 with B7 ([img6])
2 16 January, 06:42
Christian W AutorYou're welcome!
I was discovering that while I'm working on mine. I thought, I can not be that dumb but I didn't notice, that the parts in step 11, 12, 14 and 17 are wrong too. I notice it only in step 13.
16 January, 07:54
January 15, 2025
January 14, 2025
January 13, 2025
January 3, 2025
December 27, 2024
December 25, 2024
December 16, 2024
December 4, 2024
December 3, 2024
November 29, 2024
November 25, 2024
November 21, 2024
Christian Wpřidal nové fotoalbum.
Všechny komentáře (24) » 27 3 May 2024, 04:49
Christian W AutorI drilled the back of the headlights out and layed a layer bmaf on it. It is ok. When I tetsted an pair of headlights, the effect is not that big as when I painted the back just with chrome. I think it is the thickness of the headlights itself.
The I shortened the chassis. Good. At least, I fit testet the rear bumper again. Man, this is not the best of the kit. I think I repeat myselfs speach: I wish, I'd fit testet that before the paint job. And also the front facia beneath the grille. That fits not properly too in the width. I think, I have to life with that and I will 😄
Another challenge will be to get the wheels centerd in the wheel houses. Look at the different holes at the rear. They don't ven line up with the other side.... Awesom *rofl*
11 November 2024, 06:25
Christian W AutorI think, I've brought it to a good end. I had tlo glue the chassis well in plsce because it was bended "a little". Because of that, I drilled new holes for the axles to geg all wheels centered in the wheelhouse and on the ground.
I'm not satisfied with the overhang of the rear bumper. Leasson learned: do a fit festing also with the bodyparts on old kits.
21 November 2024, 05:08
November 18, 2024
November 11, 2024
Christian Wpřidal nové fotoalbum.
39 obrázky
1973 Dodge Charger - wip
1:25
That turn signals are not optimal so far. I think I have to paint some more kinda white.
Projekt: 1973 Dodge Charger
Všechny komentáře (41) » 28 3 May 2024, 04:45
Christian W AutorIn small steps it comes to an end. The windows are in beside the interior tube. I think it will be pretty good.
6 November 2024, 05:28
October 16, 2024
October 10, 2024
October 9, 2024
wnolder.php?lang=cs
2024-10-09 04:32:07
2015-03-09 09:11:29
18821
/ajax/wnolder.php?lang=cs&sd=2024-10-09 04:32:07&md=2015-03-09 09:11:29&filter=&w=18821
todo