Zeď
Wall
CasModelerpřidal nové fotoalbum.
10 28 April, 09:37
May 3, 2024
April 29, 2024
April 28, 2024
April 27, 2024
CasModelerpřidal nové fotoalbum.
All comments (6) » 26 20 February, 15:57
March 3, 2024
CasModelerpřidal nové fotoalbum.
28 obrázky
Esso Toyota 92C-V “1992 JSPC
1:24
Polishing acomplished
Projekt: Esso Toyota 92C-V “1992 JSPC”
All comments (6) » 26 6 January, 19:55
February 25, 2024
CasModelerchce tohle
Toyota Supra A70 3.0GT Turbo A "Custom Version" w/3D Printed Parts
Hasegawa 1:24
20677 2024 Nové díly 25 February, 08:20
February 20, 2024
CasModelervlastní tuto položku
Mitsubishi Lancer GSR Evolution III (PE + Resin) (For Hasegawa 23050)
Hobby Design 1:24
HD02-0382 20xx Nová forma 20 February, 18:00
February 6, 2024
January 6, 2024
January 4, 2024
CasModelerpřidal nové fotoalbum.
40 obrázky
Porsche 917k Le Mans winner 1970.
1:24
Finished. My best build ever.
Projekt: Porsche 917 K #023 "Shell"
All comments (14) » 45 25 October 2023, 17:16
Sarah-JaneTurned out very nice well done, the tyre decals on my model the letters were seperate, I real pain. How did you find attaching the two body halves together ?
4 January, 16:32
November 27, 2023
November 21, 2023
CasModelerpřidal nové fotoalbum.
All comments (11) » 26 30 August 2023, 15:55
CasModeler@Christian.
I had cut the hood out and painted it separately. The part between hood and front window I had to make using quick putty. Something went wrong and the hood doesn' t fit perfectly. I will try glue them together and I will polish the hood again, I have just bought new polishing pad. Unfortunately head light won't fit perfectly...That was a lesson for me.
20 November 2023, 11:18
Christian WSee, I didn't even notice, that the hood is closed by the kit! What a shame for that, that I have a kind of this regular Civic in my shelf.
Afterwards I think, it would have been better to tape the body and paint it in place. To take the risk, that the color could come of with the tape. "You have to die one way dead" you could say. You're always smarter afterwards. Sometimes it's annoying. 😉 You can make it.
21 November 2023, 05:39
October 25, 2023
CasModelerzačal s tímto
Porsche 917 K #023 "Shell" Winner Le Mans´70 #23 Herrmann/Attwood
Fujimi 1:24
12607 (RS-49) 2014 Nové díly 25 October 2023, 15:00
October 23, 2023
October 20, 2023
October 12, 2023
August 30, 2023
August 29, 2023
August 28, 2023
CasModelerpřidal nové fotoalbum.
25 obrázky
Nissan 180sx
1:24
My Third kit is finished. Next is Honda Civic Type R Mugen.
Projekt: Nissan 180SX (RPS13) '96
All comments (6) » 17 5 August 2023, 15:03
CasModeler@Thanks
I wanted to make a custom exhaust and I drilled the holes and I deepened them using conical file. Something went wrong and holes are uneven...I am unexperienced scale modeler. Yellow paint looks fantastic because of pink surfacer, it makes color a little bit reddish and vibrant. Next car I am going to make is Honda Civic Type R EK9 Mugen. 🙂
28 August 2023, 17:47
JvLooks fantastic you can just make some Exsorst tips out of any metal tube
And glue it on what you got
You can also buy tips at hobby shops
28 August 2023, 20:33
August 25, 2023
August 21, 2023
CasModelerpřidal nové fotoalbum.
17 obrázky
MyAlbum
1:24
Finished!. That was my second kit I have ever created. I made few mistakes: I should have used mirror finished from Hase...
Projekt: Nissan S14 Silvia (Early Version)
All comments (7) » 13 5 July 2023, 16:11
CasModelerWhich engraving blade should I use? I bought Gt65 0,3mm and Gt65 0,15mm. Does it matter?
21 August 2023, 05:48
Martin OostromThat's personal preference. Mine would be the 0,15. The thicker lines can look like trenches imo.
21 August 2023, 07:19
August 20, 2023
August 19, 2023
CasModelerHey guys! I have a question. Last time, when I sanded base coat from 2000 grit paper to 8000 surface was not shin
y. I had to use clear coat to achieve high gloss finish. This time is different, body I sanded(2500grit paper to 8000) is glossy and orange peel free without even use clear coat. Why earlier(another kit)was the surface dull before after sanding and now it is shiny? Did I make a mistake somewhere before?
y. I had to use clear coat to achieve high gloss finish. This time is different, body I sanded(2500grit paper to 8000) is glossy and orange peel free without even use clear coat. Why earlier(another kit)was the surface dull before after sanding and now it is shiny? Did I make a mistake somewhere before?
19 August 2023, 14:39
CasModelerHey guys! I have a question. Last time, when I sanded base coat from 2000 grit paper to 8000 surface was not shiny. I had to use clear coat to achieve high gloss finish. This time is different, body I sanded(2500grit paper to 8000) is glossy and orange peel free without even use clear coat. Why earlier(another kit)was the surface dull before after sanding and now it is shiny? Did I make a mistake somewhere before?
19 August 2023, 14:38
CasModelerHey guys! I have a question. Last time, when I sanded base coat from 2000 grit paper to 8000 surface was not shiny. I had to use clear coat to achieve high gloss finish. This time is different, body I sanded(2500grit paper to 8000) is glossy and orange peel free without even use clear coat. Why was the surface dull before after sanding and now it is shiny? Did I make a mistake somewhere before?
19 August 2023, 06:13
August 12, 2023
August 11, 2023
August 5, 2023
June 28, 2023
June 27, 2023
June 26, 2023
wnolder.php?lang=cs
2023-06-26 16:51:23
2023-06-26 16:47:28
130042
/ajax/wnolder.php?lang=cs&sd=2023-06-26 16:51:23&md=2023-06-26 16:47:28&filter=&w=130042
todo