Zeď

Wall

Hello Mates
I need help painting a 1/24 scale car. The paint is already applied. Should I just spray a high-gloss clear coat over it, or what's the best way (a clear coat, Tamiya, etc.)? It doesn't have to be a completely high-gloss polished surface like on show cars. Thanks in advance.✌️

19 April, 08:25

April 14, 2025

Markus Kutsch The Plastic Bench
and Jeremias H are now mates.

14 April, 08:19

March 27, 2025

Markus Kutsch The Plastic Bench

Hello Scalemates
Is it possible to put primer over chrome parts without stripping them? Or is it done with sanding them a little.?
Thanks for your reply

26 March, 10:01

gorby
I believe the 'chrome' is often a very thin metal layer so if you sand the surface it may damage it enough to start peeling off. Not done it myself before but I would suggest using a self-etching primer without sanding (after cleaning the parts).
No doubt there will be many YouTube videos on stripping chrome if you decide to go that way.

1 26 March, 15:20

bughunter
I would de-chrome it with spray for baking oven, quick and easy. The aggressive one where is stated on the can "Do not use on painted surfaces." 😉

1 26 March, 15:49

Markus Kutsch The Plastic Bench Autor
Thank you very much for your reply, Mates.
I heared about the Oven Spray. I checked my thinners and discovered a Tamiya Laquer thinner (yellow cap). I let the chrome parts over night in this and....taaa daaaaaa....all gone and easy to scrub off👍
Thanks again for your hints and clues. ✌️👍

1 27 March, 09:02

July 23, 2024

Markus Kutsch The Plastic Bench
and Rocky are now mates.

23 July 2024, 03:47

June 3, 2024

Markus Kutsch The Plastic Bench
přidal nové fotoalbum.

2 obrázky

"Saria" the desert princess

2 3 June 2024, 14:36

Markus Kutsch The Plastic Bench Autor
Sooooooo happy with my Silver Medal in Figure Master Category😊☺️☺️☺️☺️

3 June 2024, 14:40

wnolder.php?lang=cs

2024-06-03 14:40:59

2012-04-22 08:00:08

11448

/ajax/wnolder.php?lang=cs&sd=2024-06-03 14:40:59&md=2012-04-22 08:00:08&filter=&w=11448

todo