Gloster Meteor NF.14
Sword | No. SW 48011 | 1:48
Fakta
- Značka:
- Sword
- Název:
- Gloster Meteor NF.14
- Číslo:
- SW 48011
- Měřítko:
- 1:48
- Typ:
- Kompletní model
- Vydáno:
- 2020 Nová forma
- čárový kód:
- 8596444480116 (EAN)
- Téma:
- Gloster Meteor » Tryskové (Letectvo)
Značení
Gloster Meteor
Gloster Meteor NF Mk.14
Royal Air Force (1918-now)
- No. 72 Sqn. WS833/MS (Wg.Cdr. Maurice Shaw)
1956 - RAF Church Fenton
BS381C:241 BS381C:638 BS381C:627 - No. 85 Sqn. WS776/J (Sq. Ldr. Miroslav Liškutin)
1958 - RAF Church Fenton
BS381C:241 BS381C:638 BS381C:627
Obsah krabice
Plastový rámeček (Light gray), Plastový rámeček (Clear), Plastový rámeček (Light gray), Obtisky (mokré) (Multi-colored)
Rozměry:
420x205x65 mm
(16.5x8.1x2.6 inch)
Hmotnost:
363 g (0.8 lbs)
Boxart navrhl Jerry Boucher
Co je v krabici »Časová osa produktu
Sword
2020
Instrukce
Download 7205Kb (.pdf)
Obchod
Internetové obchody
USD 55.99
Na skladě »USD 59.50
Na skladě »USD 61.94
Na skladě »USD 80.99
Na skladě »AUD 95.95
USD 65.98Na skladě »CHF 45.20
USD 51.82Na skladě »Zobrazit všechny nabídky » (12 celkem)
Soukromý obchod a swap
Alternativní SKU pro Sword SW 48011:
SW48011 | SW-48011 | 48011 | SWORD48011 | 8596444480116 | 48011
Poznámka: Ceny a dostupnost jsou pouze orientační. Zkontrolujte také, zda se produkt skutečně shoduje!
Související produkty
Všechny související produkty » (26 celkem)
In-box recenze
Externí recenze
Reklama
Posouzení florymodels
Všechny recenze » (5 celkem)
Časopisy
Všechny časopisy » (4 celkem)
Projekty
4 obrázky
Gloster Meteor NF.111:48
fuselages... 3 for 1 ! The idea is to make a single NF.11 with:
- NF.14 / Sword (main body)
- NF.11 / Classic Airframes ...
Projekt: Gloster Meteor NF.11
Galerie
Komentáře
Gluefinger
I was just about to begin to put the decals on this thing when I realized they mis-numbered a large part of smaller decals (of which there are a lot) in the instruction sheet. Worst of all, there seems to be no logic to the mis-numbering, such as a fixed offset...
Now I have to spend hours to find out which goes where.
Thank you, Sword, for ruining what so far was a quite enjoyable build.
If you, or a test subject, had built the model just once, using your own instructions, this would immediately have become obvious.
I suggest you peruse the following Wikipedia article before p*ssing off more customers with something that is easily avoidable:
en.wikipedia.org/wiki/Quality_control
I was just about to begin to put the decals on this thing when I realized they mis-numbered a large part of smaller decals (of which there are a lot) in the instruction sheet. Worst of all, there seems to be no logic to the mis-numbering, such as a fixed offset...
Now I have to spend hours to find out which goes where.
Thank you, Sword, for ruining what so far was a quite enjoyable build.
If you, or a test subject, had built the model just once, using your own instructions, this would immediately have become obvious.
I suggest you peruse the following Wikipedia article before p*ssing off more customers with something that is easily avoidable:
en.wikipedia.org/wiki/Quality_control
1 17 October 2021, 14:00
Referenční materiál
Všechny knihy » (41 celkem) Všechny walkaroundy » (22 celkem)