A-6 "Intruder" , EA-6 "Prowler" wheels set
ResKit | No. RS32-0001 | 1:32
Gerçekler
- Marka:
- ResKit
- Başlık:
- A-6 "Intruder" , EA-6 "Prowler" wheels set
- Numara:
- RS32-0001
- ölçek:
- 1:32
- tip:
- Detay seti
- Yayınlandı:
- 2020 Yeni araç
- Barkod:
- 4589913295353 (EAN)
- konu:
- Grumman A-6 Intruder » jetler (uçak)
İçin tasarlandı
Bu satış sonrası seti için tasarlanmıştır:
Trumpeter
Yeni araç
Yeni parçalarPazaryeri
Çevrimiçi mağazalar
USD 14.99
Stokta var »
USD 17.24
Stokta var »
USD 17.99
Stokta var »
USD 18.71
Stokta var »
zł 59.59
USD 16.50Stokta var »
€ 14.68
USD 17.31Mevcut »
€ 12.92
USD 15.23Stoklar tükendi »
€ 15.18
USD 17.90Stoklar tükendi »
¥ 1836
USD 15.25Stoklar tükendi »Alternatif SKU'lar ResKit RS32-0001:
RS320001 | 32-0001 | RES-RS32-0001 | RESRS320001
Not: Fiyatlar ve uygunluk sadece göstergedir. Ürünün gerçekten aynı olup olmadığını da kontrol edin!
Kutu içi incelemeler
Dış incelemeler
Bunun için gelen kutu incelemeleri hakkında hiçbir bilgimiz yok. A-6 "Intruder" , EA-6 "Prowler" wheels set (#RS32-0001) itibaren ResKit.
Yorumlar
Jon SomervilleThe holes for the wheels do not line up for the only kit in 1/32. My guess is that these are accurate to the real thing and not designed to fit the kit. So which do you prefer? I would have liked to see if fit the kit. Used drill bits to match a fitting hole to the original wheel parts and then drilled out the resin. The cut line to remove the casting block for the front wheels are correct, but not the mains.
Tüm yorumlar (10) » 1 19 April 2021, 15:43
Jon Somerville YazarI bought the MERs from ResKit. That was the one thing I was glad about that I waited so long before finishing the kit. Toyed with the idea of fixing the tail comb myself, but was going to be too much work for only a little gain.
Other issues with the kit is where the aft side of where the nose gear joins the fuselage is way to deep into the gear bay. The wing fences are not in the correct spot and the fuselage has way too many rivets. I filled the rivets where needed. If they ghost a bit, that's okay too.
19 December 2023, 13:44
Jon Somerville YazarNow that I re-read the last line in the review should really be "The cut line to remove the casting block for the front wheels hubs is correct, but not the mains." So referring to the hubs not the wheels themselves.
25 January 2024, 17:38
Referans materyali
Bütün kitaplar » (29 toplamda) Tüm geziler » (15 toplamda)