F-104G / TF-104G Starfighter duo build
Comentários
31 20 January 2021, 15:11
Erik Leijdens
Very interesting!! I'm too am busy with a couple of 104s. But the sheer amount of extra stencils I have purchased via the Dutch Starfighter foundation are killing me. Great work so far Eric!! Definitely following off course!
Very interesting!! I'm too am busy with a couple of 104s. But the sheer amount of extra stencils I have purchased via the Dutch Starfighter foundation are killing me. Great work so far Eric!! Definitely following off course!
4 February 2021, 18:58
Jose Freire
Following, since im building two Starfighters at the same time. One will be a Spanish Air Force plane and the other will be probably a Greek one, since i would like to build a Belgium plane but dont have any decals for it
Following, since im building two Starfighters at the same time. One will be a Spanish Air Force plane and the other will be probably a Greek one, since i would like to build a Belgium plane but dont have any decals for it
4 February 2021, 19:41
Eric Juvyns
Thx guys.
Erik, I must say I'm dreading the decal phase. I build the 1/32 Italeri F-104G a couple of years ago so I know all about the number of decals. And now I have to do it twice.
Jose, Daco has some beautiful decals to build a lot of Belgian F-104's 🙂
Thx guys.
Erik, I must say I'm dreading the decal phase. I build the 1/32 Italeri F-104G a couple of years ago so I know all about the number of decals. And now I have to do it twice.
Jose, Daco has some beautiful decals to build a lot of Belgian F-104's 🙂
6 February 2021, 06:30
Slavo Hazucha
Some really cool work here - excellent pit, a respect-inspiring wing-riveting job and a really great looking camo! Looking forward to the next steps 👍
Some really cool work here - excellent pit, a respect-inspiring wing-riveting job and a really great looking camo! Looking forward to the next steps 👍
18 February 2021, 19:02
Eric Juvyns
Thx Jose and Slavo.
Next up is some more detail painting, especially the different color variations on the bare metal TF-104G. Luckily the DACO manual provides detailed painting guides for this. Finding the right metal tones will be a challenge for me. I'm going to use MRP and Mr Color Super Metallic paints.
Thx Jose and Slavo.
Next up is some more detail painting, especially the different color variations on the bare metal TF-104G. Luckily the DACO manual provides detailed painting guides for this. Finding the right metal tones will be a challenge for me. I'm going to use MRP and Mr Color Super Metallic paints.
19 February 2021, 13:09
Slavo Hazucha
I used MRP metals on my F-104 (all metals used there) - very nice to work with, Chrome somewhat more difficult, particularly in combination with oil-washes.
I used MRP metals on my F-104 (all metals used there) - very nice to work with, Chrome somewhat more difficult, particularly in combination with oil-washes.
19 February 2021, 16:10
Eric Juvyns
Indeed Slavo, the MRP is very nice.
Small update with the metal paint. After using a lot of masking tape the result is not that bad. For me Mr Color has the best metal paint, followed very close by MRP and then Alclad II. I had some issues with some Alclad colors which I don't have with Mr Color and MRP. But that's just my experience.
Indeed Slavo, the MRP is very nice.
Small update with the metal paint. After using a lot of masking tape the result is not that bad. For me Mr Color has the best metal paint, followed very close by MRP and then Alclad II. I had some issues with some Alclad colors which I don't have with Mr Color and MRP. But that's just my experience.
6 March 2021, 12:28
Jos Jansen
Iam curious what kind of issues with the metals from Alclad Eric? Its my favorite that's why Iam asking.
Iam curious what kind of issues with the metals from Alclad Eric? Its my favorite that's why Iam asking.
6 March 2021, 13:46
Eric Juvyns
Jos, I'm having problems with paint flow through my airbrush with some colors. I also find that I can't spray as tight a pattern as I can with Mr Color and RMP. With Mr color I can really spray very fine lines. This is not possible with Alclad. Hope this answers your question.
Jos, I'm having problems with paint flow through my airbrush with some colors. I also find that I can't spray as tight a pattern as I can with Mr Color and RMP. With Mr color I can really spray very fine lines. This is not possible with Alclad. Hope this answers your question.
6 March 2021, 17:13
Jos Jansen
Okay, I know what you mean. I don't know if you've tried to lower your air-pressure, I always use 0.6/0.8 Psi (very low pressure) for the very thin Alclad metals, then I've no trouble with all!
Okay, I know what you mean. I don't know if you've tried to lower your air-pressure, I always use 0.6/0.8 Psi (very low pressure) for the very thin Alclad metals, then I've no trouble with all!
6 March 2021, 17:17
Eric Juvyns
I have tried that in the past, but I can always give it another try. Thx for the advise.
I have tried that in the past, but I can always give it another try. Thx for the advise.
7 March 2021, 06:44
Slavo Hazucha
Great progress - especially like the metal & light grey & white panel contrasts - got to try this out at some point on a suitable aircraft!
Also the seat looks top notch, a really nice one with all the harnesses & color variety! 👍
Great progress - especially like the metal & light grey & white panel contrasts - got to try this out at some point on a suitable aircraft!
Also the seat looks top notch, a really nice one with all the harnesses & color variety! 👍
8 March 2021, 14:08
Eric Juvyns
Finished them at last. Lost my mojo a bit after having an accident with the gloss varnish on th F-104G. Damned fingerprint. Decided to strip it and restart. Didn't feel like taking more pictures after that. In the end it turned out all right. Not my best work. Now, finally after 35+ years in the hobby I have a couple of BAF Starfighters.
Finished them at last. Lost my mojo a bit after having an accident with the gloss varnish on th F-104G. Damned fingerprint. Decided to strip it and restart. Didn't feel like taking more pictures after that. In the end it turned out all right. Not my best work. Now, finally after 35+ years in the hobby I have a couple of BAF Starfighters.
29 May 2021, 05:41
Slavo Hazucha
A seriously cool duo - I guess one could only focus on making different Starfighter versions and never run out of great paint variants... Particularly like the camo one with the tiger tanks, really came out superb! 👍
A seriously cool duo - I guess one could only focus on making different Starfighter versions and never run out of great paint variants... Particularly like the camo one with the tiger tanks, really came out superb! 👍
6 August 2021, 20:15
Album info
Duo build of the Hasegawa/Revell kits of the TF-104G and F-104G. Both are in Belgian Air Force colors. One BMF, the other one in SEA camouflage.