Dragon 1/700 USS Essex CV-9

1
March 18, 2018
2
March 18, 2018
The basic hull pretty much built, the stern deck fit real well,,, but,,,
3
March 18, 2018
But the bow dech has quite a gap. It won't bee seen much, but not a nice fit. I hope the rest of these Dragon kits are better. That's not very good for a high $$$ kit !!
4
March 18, 2018
5
March 18, 2018
thats just UGLY !!
6
March 18, 2018
Id rather have a one piece hull !
7
March 18, 2018
8
March 18, 2018
9
March 18, 2018
sanding out the seam after attaching the bottom hull was not fun! I like the 1 piece hulls better, as I wont be doing any waterline builds,,, well maybe 1. There's gonna be a line there, but the red bottom should pretty much hide it.
10
March 18, 2018
Sponson added, fit is quite good, better than I expected
11
March 18, 2018
bit of a gap there too. you cant really position things different as they have tabs to align the parts
12
March 18, 2018
this side looks good
13
March 18, 2018
hanger deck glued in, fit is good
14
March 18, 2018
the basic island
15
March 18, 2018
those guns are TINY !! they give you 64, this kit uses 53. I lost a few and messed up a few, but still have a few spares. they are 2 pieces and took several days to clean up and assemble
16
March 18, 2018
radars
17
March 18, 2018
the other guns
18
March 18, 2018
and more guns. dont ask me which is what ???
19
March 18, 2018
2 of the gun mounts are malformed! I've requested replacements from Dragon, but since it's fairly old don't have much hope of getting them
20
May 11, 2020
21
May 11, 2020
22
May 11, 2020
23
May 11, 2020
24
May 11, 2020
25
May 11, 2020
26
May 11, 2020
27
May 11, 2020
28
May 11, 2020
29
May 11, 2020
30
May 11, 2020
31
May 11, 2020
32
May 11, 2020
33
May 11, 2020
34
May 11, 2020
35
May 11, 2020
36
May 11, 2020
37
May 11, 2020
38
May 11, 2020
39
May 11, 2020
40
May 11, 2020
41
May 11, 2020
42
May 11, 2020
43
May 11, 2020
44
May 11, 2020
45
May 23, 2020
Actually I had the GMM Essex Class PE set that came with a 1/720 kit that I had bought. I wasn't planning on using it all on this kit as I have 2 more Dragon Essex class kits. But,,,,, I did want to put a railing around the 1 open elevator. Well guess what! The damn thing is too short! It would fall through the hole!!!
46
May 23, 2020
I'm hoping when I do the next Essex class [Antietam or Lexington]that the railings fit better. Guess I'll have to leave both elevators up! I mainly did this kit to see if I could even do those tiny parts. It was pretty tedious, but doable.
I'll put a bit more effort and hopefully get a better fit next time. Something wasn't quite right on this one, the deck didn't fit quite right. Something was off.
47
May 23, 2020
48
May 23, 2020
49
May 23, 2020
50
May 23, 2020
51
May 23, 2020
52
May 23, 2020
53
May 23, 2020
54
May 23, 2020
55
May 23, 2020
56
May 23, 2020
57
May 23, 2020
58
May 23, 2020
59
May 23, 2020
60
May 23, 2020
61
May 23, 2020
62
May 23, 2020
63
May 23, 2020
64
May 23, 2020
65
May 23, 2020
66
May 23, 2020
67
May 23, 2020
68
May 23, 2020
69
May 23, 2020

Comentários

1 18 March 2018, 17:36

Robert W Martel
All in all it turned out pretty well. This Dragon was much more complex than the Academy Kitty Hawk. The Kitty Hawk went easier & faster and looks pretty much just as good.
The Dragon kits do have more detail, but much more difficult to build. And,,,, for a ship that carried some 90 planes, 30 showing on the boxart, it only includes 18 aircraft!!!
The decks look pretty barren compared to the Kitty Hawk [there are 4 in the hanger]. The Kitty Hawk deck is pretty loaded and there was a handful left over!
But, it was a good learning experience. I was thoroughly disappointed in the GMM PE though! The kit PE worked well for the radars & superstructure railings, wish they had included more.
ON to the next project !!!!!

23 May 2020, 04:06

Jay Dubya
Well done Bobstar

23 May 2020, 04:28

Robert W Martel
Thanks Jay.
I learned from this one, the next one I'll have a better grip on what to watch out for. Ah, little here little there, maybe I can do a bit better next one.

23 May 2020, 04:35

Album info

Very nice, well detailed kit. Tons of itty bitty parts !!
It's gonna be FUN !!!

Dragon USS Essex

69 imagens

1:700

Concluído

Todos os álbuns

Ver todos os álbuns »