Tamiya Bismarck 1/350 78010
top of arado
behind of the arado
assembly of the hangar
primer time vallejo mecha grey
top of the arado
masking
the result of the paint miss again some piece
masking
assembly of mast, need to apply some putty
putty on the mast
arado with the hangar
arado
arado
arado
grey paint on the hangar
grey paint for the superstructure
test of the superstructure
the wood it instaling
the launch it finish with the wood and some wash on the windows
view of the side
before / after the wood make more realist
Primer of the mast and other piece
i built some wood for make indside the launch
support of the mast it assembly and pass the putty too
Assembly for look the paint of the superstructure, we can see the grey is more light on the hangar and chimney, i will pass again the paint i not fix
mast
support of mast who will stay on the top of hangar
primer of some support for the arado and mast
i use the glossy black paint for the base
priner white raditz studio
after the black dry i can pass my metalic grey xf-56
Hangar with the mast it finish
use the masking liquid for the second paint of the bridge
After just to use some water for delete the mask
the chimney now it finish
less on the water 30 minutes for take off the mask
I delete all masking now i will try to paint with the brush the dark sea grey
after paint the grey on the brush not excelent, i must to make again with the airbrush
after paint the grey on the brush not excelent, i must to make again with the airbrush
after paint the grey on the brush not excelent, i must to make again with the airbrush
after paint the grey on the brush not excelent, i must to make again with the airbrush
I try to mask with the paper, i copy the form and apply on my paper
it good idea but difficult to arrive perfectly i decide to change the plan
Let's go to masking with masking tape, i can't to use my liquid masking because i will paint with the vallejo paint and the mask must to take off with the water so i risk to endomage the paint
masking in progress
view of the masking
one side finish
the masking it finish for today
I begin the masking of the second floor
This is a size of my masking
In progress
The behind it finish
Process masking on the front
The masking it finish
The masking it finish
The masking it finish
The masking it finish
Primer for the lifeboat and the second arado
Paint on dark grey xf-24, next step mask it and paint the wall in dark sea grey
Little problem must to fix before, i take off some support with the manipulation so i must to make the putty and make the new paint
Ok i mask the dark grey now
And i pass my color dark sea grey vallejo on the wall
It the time time to take off all the scotch tape
the brige it done, not have big problem happy for the result
I can befin to fix the brige with the cement tamiya and masking tape
the front and behind now it paste
The last superstructure it finish too
The last superstructure it finish too
I fix with the cement the last superstructure on the central bidge
One view of my model not yet to fix, just to test look like good
zoom on the separation of the bridge
separation of the brigde
begin to fix the central bridge with cement
msut to putty the separation
msut to putty the separation
i order the railing photo etch
Sand and putty for fix the 3 bridge
helice x-12
fix some detail with cement
little view after cement
re-paint for the radar and projector
fix some detail with cement
fix some detail with cement
fix some detail with cement
little view after cement
little view after cement
little view after cement
little view after cement
construction of the wood deck for the launch
not rest a lot now
construction of the wood deck for the launch
construction of the wood deck for the launch
construction of the wood deck for the launch
construction of the wood deck for the launch - wash vallejo
The launch is paint
The launch is paint
little view after cement
little view after cement
little view after cement
little view after cement
the launch it fix with the cement
the launch it fix with the cement
the launch it fix with the cement
view after cement
view after cement
view after cement
The last launch it paint
The last launch it paint
The last launch it paint
The last launch it paint
the wood deck for the launch in progress
the last launch with the wood deck finish
the last launch with the wood deck finish
the last launch with the wood deck finish
other launch
i fix with the cement the last launch
i fix with the cement the last launch
scratch for the helice of the arado
view after cement
scratch for the helice of the arado
scratch for the helice of the arado
scratch for the helice of the arado
scratch for the helice of the arado, rest the camouflage to make
scratch for the helice of the arado, rest the camouflage to make
scratch for the helice of the arado, rest the camouflage to make
let's go for the second arado
view after cement
Railing Photo etch Eduard painted (Vallejo 70.991)
Zoom on this photo-etch
Photo with all element who fix with the ciment, let's to installing this photo-etch and compare
Correction of the paint, Second paint of the arado rlm73
Correction of the paint, Second paint of the arado rlm73
Masking for the second color rlm72
Result of the camouflage
Correction of the paint, Second paint of the arado rlm73
New ciement for photo etch
Fix the railaing with the ca tamiya
Fix the railaing with the ca tamiya
Fix the railaing with the ca tamiya
make the form on the photo etch not easy
Fix the railaing with the ca tamiya
Fix the railaing with the ca tamiya
Paint white mat on the cokpit
Paint white mat on the cokpit
Paint white mat on the cokpit
Paint of german symbol, vallejo model color and model air ( white & black mat)
Result of the arado finish
Result of the arado finish
Result of the arado finish
Result of the arado finish
Result of the arado finish
View of the railing in photo etch eduard
View of the railing in photo etch eduard
View of the railing in photo etch eduard
View of the railing in photo etch eduard
View of the railing in photo etch eduard
The railing it finish let's go for the weathering
The railing it finish let's go for the weathering
The railing it finish let's go for the weathering
It the time to pass the clear gloss ( vallejo mecha gloss clear)
It the time to pass the clear gloss ( vallejo mecha gloss clear)
It the time to pass the clear gloss ( vallejo mecha gloss clear)
It the time to pass the clear gloss ( vallejo mecha gloss clear)
It the time to pass the clear gloss ( vallejo mecha gloss clear)
It the time to pass the clear gloss ( vallejo mecha gloss clear)
The railing it finish let's go for the weathering
Let's go for prepare all product for the weathering
weathering on turret of the bismark it done
weathering on turret of the bismark it done
weathering on turret of the bismark it done
weathering on turret of the bismark it done
weathering on turret of the bismark it done
weathering on turret of the bismark it done
weathering on turret of the bismark it done
weathering on turret after mat clear
i apply some black wash on windows and chimney
i apply some wash filter for simulate the wood deck
i apply some wash filter for simulate the wood deck
i apply some wash filter for simulate the wood deck
Final of the weathering on the wood deck
Final of the weathering on the wood deck
Final of the weathering on the wood deck
create some piece for the crane
create some piece for the crane
Begin of guying
rigging
rigging
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Finish
Comments
16 28 October 2019, 13:24
TreehuggerThat looked scary adding putty or whatever for the cannon barrel covers.
28 October 2019, 14:56
Guillaume Boulangeryes this kit must to have the correction for masking a lot of problem of injection, i use the blu tak for create the blastbag on the barrel
28 October 2019, 15:05
TreehuggerBtw, I can recommend the Vallejo putty (white, presumably fairly non toxic). Just use a coarse file/sanding stick, else it might take a while to sand down the putty with a fine file/sanding stick. One can't fill holes in one go, one must let the putty dry in layers, as the putty will shrink the more you add on. A small bottle works, but I prefer the tube w. thin applicator.
15 November 2019, 11:58
Udo BrowarczikMy first Big Ship, some 32 Yers ago.... Beautiful, what You made out of it.
31 July 2020, 09:13
Album info
Build step by step on my bismarck, the kit it old and a lot of ajustement it not perfect be quiet and make slowly for not boring. The revell kit it better but more expensive so if you want to have the good ship you can with this tamiya kit.
