Wall
Wall
January 5, 2021
January 4, 2021
January 3, 2021
January 1, 2021
December 20, 2020
2 | 19. December 2020, 23:10
A.J. Madison
No wonder this kit gave me a feeling of deja-vu. But I built the Testors version in the 20th century. I know there's a lot new parts, but the Testor's reboxing was a nice clean build.
No wonder this kit gave me a feeling of deja-vu. But I built the Testors version in the 20th century. I know there's a lot new parts, but the Testor's reboxing was a nice clean build.
20. December 2020, 03:47
December 16, 2020
50 | 27. September 2020, 15:01
View full thread (53 Comments)
Jasper Breur
That's correct Rui. I liked Michael's idea, so I wanted to contribute something too.
That's correct Rui. I liked Michael's idea, so I wanted to contribute something too.
14. December 2020, 07:42
December 13, 2020
4 | 4. May 2020, 14:58
Jasper Breur
I photoshopped some photos for the ARC photography contest over on Facebook, incredibly difficult to get a somewhat convincing result!
I photoshopped some photos for the ARC photography contest over on Facebook, incredibly difficult to get a somewhat convincing result!
3. December 2020, 13:21
December 11, 2020
December 9, 2020
December 8, 2020
November 30, 2020
November 19, 2020
Phabulous idea November 14, 2020
November 13, 2020
November 9, 2020
17 | 13. January 2020, 13:32
View full thread (49 Comments) 
17. April 2020, 21:20
Jasper Breur
Thank you very much Paulo! Good luck with your Herc, it is a challenging kit!
Thank you very much Paulo! Good luck with your Herc, it is a challenging kit!
7. November 2020, 14:37
November 7, 2020
November 3, 2020
October 29, 2020
4 | 29. October 2020, 12:19
Jasper Breur
This is my attempt at a Cougar in 1:48 scale. The model is my first dive into 3D printed models, and after a lot of work and frustration it is finished to a decent result. Many lessons were learned, and I can tell you that plastic injection kits are here to stay. 3D printing is nice, but you can't beat a good plastic injection kit!
This is my attempt at a Cougar in 1:48 scale. The model is my first dive into 3D printed models, and after a lot of work and frustration it is finished to a decent result. Many lessons were learned, and I can tell you that plastic injection kits are here to stay. 3D printing is nice, but you can't beat a good plastic injection kit!
29. October 2020, 13:06
October 21, 2020
5 | 21. October 2020, 15:21
Jasper Breur
My first attempt at an airliner in 1:144 scale. A change from military subjects, with a whole new set of challenges!
My first attempt at an airliner in 1:144 scale. A change from military subjects, with a whole new set of challenges!
21. October 2020, 15:22
October 20, 2020
October 15, 2020
October 7, 2020
KLM Royal Dutch AirlinesSeptember 28, 2020
September 27, 2020
25 images
1:48
Completed
2+ 2 | 11. October 2018, 10:26
Patrick Hagelstein
https://www.scalemates.com/kits/101730-italeri-2672-ch-47d-chinook
Euh... Deze! Deze zijn wel nog van de tijd dat de titels hoog op de romp zaten.
https://www.scalemates.com/kits/101730-italeri-2672-ch-47d-chinook
Euh... Deze! Deze zijn wel nog van de tijd dat de titels hoog op de romp zaten.
12. October 2018, 15:37
Jasper Breur
Ik ben benieuwd naar die van jou Bart, ik moet eerst nog een Chinook op de kop tikken
Wat die decals betreft, ik heb echt geen flauw idee. Je zou Luuk Boerman (Dutch Decal) kunnen proberen, ik heb het hem een poos geleden gevraagd en hij zij toen dat een 1:48 Chinook set er wel een keer gaat komen. De decals uit die oude Italeri ga je nergens meer vinden vrees ik...
Ik ben benieuwd naar die van jou Bart, ik moet eerst nog een Chinook op de kop tikken
Wat die decals betreft, ik heb echt geen flauw idee. Je zou Luuk Boerman (Dutch Decal) kunnen proberen, ik heb het hem een poos geleden gevraagd en hij zij toen dat een 1:48 Chinook set er wel een keer gaat komen. De decals uit die oude Italeri ga je nergens meer vinden vrees ik...12. October 2018, 15:48
Bart Meeldijk
Haha, heb precies hetzelfde contact gehad! (maar eerlijk: het gaat altijd nogal traag bij DD). Ideaal zou een sheetje zijn, maar dan moet er iemand zijn die extreem goed met photoshop is. Ik ben toevallig bezig met een Deense Lynx MK.90 (1:35) en heb via een Deense bouwer een PDF gekregen met alle decals die hij zelf heeft gemaakt vanaf foto's. Zal wel een megaklus zijn geweest, maar dat is natuurlijk perfect!
Wil uiteraard ook de nieuwe toned-down roundels, die bestaan vooralsnog niet... Hopen da Luuk ze snel op de markt brengt! (Let wel op: die nieuwe uitgave van Italeri heeft alleen de stompe neus, ik heb er eentje opgestuurd gekregen vd customer service: shop.italeri.com)
Haha, heb precies hetzelfde contact gehad! (maar eerlijk: het gaat altijd nogal traag bij DD). Ideaal zou een sheetje zijn, maar dan moet er iemand zijn die extreem goed met photoshop is. Ik ben toevallig bezig met een Deense Lynx MK.90 (1:35) en heb via een Deense bouwer een PDF gekregen met alle decals die hij zelf heeft gemaakt vanaf foto's. Zal wel een megaklus zijn geweest, maar dat is natuurlijk perfect!
Wil uiteraard ook de nieuwe toned-down roundels, die bestaan vooralsnog niet... Hopen da Luuk ze snel op de markt brengt! (Let wel op: die nieuwe uitgave van Italeri heeft alleen de stompe neus, ik heb er eentje opgestuurd gekregen vd customer service: shop.italeri.com)
31. October 2018, 10:17
Jasper Breur
Ik heb zelf ook geprobeerd om een setje te maken, maar dat is echt een enorme klus. Vooral het vinden van goede foto's van alle stencils is erg lastig, en dan alles nog op schaal krijgen. Ik heb al wel 2 neuzen voor de Nederlandse versie liggen van de Italeri costumer service, nu alleen nog de Chinook zelf.
Ik heb zelf ook geprobeerd om een setje te maken, maar dat is echt een enorme klus. Vooral het vinden van goede foto's van alle stencils is erg lastig, en dan alles nog op schaal krijgen. Ik heb al wel 2 neuzen voor de Nederlandse versie liggen van de Italeri costumer service, nu alleen nog de Chinook zelf.
1. November 2018, 15:29
Carsten Gurk
Heeft de Nederlandse CH-47F een andere neus dan die in dit kit? Om welk deel moet ik bij Italeri vragen, om de juiste neus te krijgen?
Heeft de Nederlandse CH-47F een andere neus dan die in dit kit? Om welk deel moet ik bij Italeri vragen, om de juiste neus te krijgen?
2. July 2019, 07:51
Jasper Breur
Ja, de neus van alle Nederlandse Chinook's is het radarmodel. Helaas heeft Italeri dit onderdeel niet meer en is het dus niet meer te krijgen.
Ja, de neus van alle Nederlandse Chinook's is het radarmodel. Helaas heeft Italeri dit onderdeel niet meer en is het dus niet meer te krijgen.
2. July 2019, 11:15
Jens
The Chinook is a real chunk, I have built the AHC 47, and unfortunately there is a lot of extra work, the mold making of Italeri is probably not on Tamiya level
I'm in
The Chinook is a real chunk, I have built the AHC 47, and unfortunately there is a lot of extra work, the mold making of Italeri is probably not on Tamiya level
I'm in 2. July 2019, 11:24
10 | 24. August 2019, 22:45
View full thread (13 Comments) 
Jasper Breur
Thank you very much Gastón! Amazing work on your Shuttle too, very detailed build!
Thank you very much Gastón! Amazing work on your Shuttle too, very detailed build!
23. September 2019, 21:44
Chaz Gordon
Very Nice. I just ordered the Airfix one yesterday, Gonna steal that base idea
Very Nice. I just ordered the Airfix one yesterday, Gonna steal that base idea
23. September 2019, 23:10
Jasper Breur
Thank you Chaz, good luck with your Shuttle! Looking forward to seeing the result.
Thank you Chaz, good luck with your Shuttle! Looking forward to seeing the result.
24. September 2019, 10:25
Jasper Breur
Thank you Ignacy. I think this beauty deserves a small update soon.
Thank you Ignacy. I think this beauty deserves a small update soon.
17. September 2020, 16:01
September 6, 2020
22 | 16. July 2018, 17:17
Jasper Breur
Fully restored this old kit. I added new 3D printed parts, and repainted the tank with new decals to top it all off.
Fully restored this old kit. I added new 3D printed parts, and repainted the tank with new decals to top it all off.
24. July 2020, 17:08
James C
I really like shape of these older Leopards. Beautifully painted and weathered Jasper
I really like shape of these older Leopards. Beautifully painted and weathered Jasper
4. September 2020, 18:13
Jasper Breur
Thank you very much James! To me, the 'old' Leopards are the most interesting tank of the Cold War. Many interesting versions and a large number of users.
Thank you very much James! To me, the 'old' Leopards are the most interesting tank of the Cold War. Many interesting versions and a large number of users.
4. September 2020, 21:54
September 5, 2020
September 4, 2020
1:48
Ideas
1 | 4. September 2020, 13:25
Jasper Breur
Good to have you onboard Jos! I think I'll first do the two display team Vipers. I might even make that a double build
Good to have you onboard Jos! I think I'll first do the two display team Vipers. I might even make that a double build
4. September 2020, 16:19
September 3, 2020
7 | 27. January 2019, 14:32
View full thread (14 Comments) 
Treehugger
How did you get the tank to tilt? Is it as simple as removing the small piece of plastic on most of the wheels?
Can it be tilted the other way, or must the wheels be glued in place?
How did you get the tank to tilt? Is it as simple as removing the small piece of plastic on most of the wheels?
Can it be tilted the other way, or must the wheels be glued in place?
29. March 2020, 10:24
Jasper Breur
The suspension arms have locator tabs on them, if you remove these you can freely move the suspension. There is enough friction to keep them in place, so glueing isn't necessary. I added a connection between the arms on both sides to make them move synchronised. So yeah, it moves freely and can be positioned freely.
The suspension arms have locator tabs on them, if you remove these you can freely move the suspension. There is enough friction to keep them in place, so glueing isn't necessary. I added a connection between the arms on both sides to make them move synchronised. So yeah, it moves freely and can be positioned freely.
29. March 2020, 10:47
Jasper Breur
Thank you gentlemen! I wanted to show the Stridsvagns iconic suspension system, so this display is the perfect way to do that!
Thank you gentlemen! I wanted to show the Stridsvagns iconic suspension system, so this display is the perfect way to do that!
3. September 2020, 21:13
1 | 13. September 2018, 05:34
Jasper Breur
It is already on the display shelve Rui! M1A1 HC Abrams "All Bout Da Bones" | Album by Jasper_Breur (1:35)
It is already on the display shelve Rui! M1A1 HC Abrams "All Bout Da Bones" | Album by Jasper_Breur (1:35)
3. September 2020, 21:17
August 22, 2020
Koninklijke Luchtmacht (Royal Netherlands Air Force 1921-now)
August 15, 2020
F-16AM Fighting Falcon J-015 "Solo Display Team 2009" Royal Netherlands Air Force
Syhart Decal 1:48
48-055
+Syhart Decal 1:48
48-055
15. August 2020, 20:33
August 5, 2020
July 12, 2020
3 | 28. February 2018, 18:08
Patrick Hagelstein
Whauw! That's a cool Leo! I like the colors, I'll give them a try too! Can you make some more pictures of that DOLP figure please?
Whauw! That's a cool Leo! I like the colors, I'll give them a try too! Can you make some more pictures of that DOLP figure please?
28. February 2018, 20:02
Jasper Breur
Thank you so much Patrick! It's not really a figure, just the head. See my Leopard 1V project for more, I used the set there too.
Thank you so much Patrick! It's not really a figure, just the head. See my Leopard 1V project for more, I used the set there too.
28. February 2018, 20:13
Frank Krüger
Great! I love your Leo !! He looks like real !!! Congratulations !!!!
Great! I love your Leo !! He looks like real !!! Congratulations !!!!
1. March 2018, 17:47
Jasper Breur
I've been restoring some old builds lately, and this Leopard couldn't be left behind!
I've been restoring some old builds lately, and this Leopard couldn't be left behind!
12. July 2020, 11:08
Jasper Breur
Thank you Neuling! I saw this look on some references and wanted to replicate it
Thank you Neuling! I saw this look on some references and wanted to replicate it
12. July 2020, 15:06
6 | 13. September 2018, 15:36
Zach Wilson
great work - all of the stowage on the tank, the tow cables fall really naturally and give it a sense of weight and scale.
great work - all of the stowage on the tank, the tow cables fall really naturally and give it a sense of weight and scale.
11. July 2020, 14:20
Rui S
@Zack, I agree. And the diferent paint work in the stowage. The camo tarp on the turret left. And the detail of papers in the road floor under the track. Very good indeed
@Zack, I agree. And the diferent paint work in the stowage. The camo tarp on the turret left. And the detail of papers in the road floor under the track. Very good indeed
11. July 2020, 14:44
James C
Fabulous work Jasper. I particularly like all the stowage items that you've loaded onto the back of the turret. Very nicely done.
Fabulous work Jasper. I particularly like all the stowage items that you've loaded onto the back of the turret. Very nicely done.
11. July 2020, 18:18
Jasper Breur
Thank you gentlemen! Glad to have your approval! This is one of my favourite builds, despite it being one of my older ones.
Thank you gentlemen! Glad to have your approval! This is one of my favourite builds, despite it being one of my older ones.
11. July 2020, 20:29
Jasper Breur
Thank you James, Rui, Zach! The Legend Stowage set is a beautiful addition to any Abrams, very happy with how it turned out
Thank you James, Rui, Zach! The Legend Stowage set is a beautiful addition to any Abrams, very happy with how it turned out
11. July 2020, 20:32
July 11, 2020
June 30, 2020
MiG-21 Lancer conversion set for Eduard MiG-21 M/MF kit
Icaerodesign 1:48
MIG 21 LANCER 1/48
+Icaerodesign 1:48
MIG 21 LANCER 1/48
201x | New tool
30. June 2020, 09:40
June 26, 2020
June 20, 2020
June 10, 2020
MiG-21 Lancer conversion set for Eduard MiG-21 M/MF kit
Icaerodesign 1:48
MIG 21 LANCER 1/48
+Icaerodesign 1:48
MIG 21 LANCER 1/48
201x | New tool
10. June 2020, 09:50
June 9, 2020
June 8, 2020
May 31, 2020
May 17, 2020
May 16, 2020
May 8, 2020
May 7, 2020
May 4, 2020
May 3, 2020
May 1, 2020
April 27, 2020
April 26, 2020
German Self-Propeled Howitzer w/Add-On Armor
Panzerhaubitze 2000Meng Model 1:35
TS-019
2015 | Changed parts
26. April 2020, 13:24
April 19, 2020
18. April 2020, 19:20
Kon_Bar
Congratulations! Very good idea for diorama
Two questions about props: did you use any aftermarket set? Why yellow ends?!
Congratulations! Very good idea for diorama
Two questions about props: did you use any aftermarket set? Why yellow ends?!18. April 2020, 19:30
Jasper Breur
Thank you Kon_Bar! I made the props myself, as I couldn't find an aftermarket set that looked right. What do you think is wrong with yellow ends? It is created by the colour of the blade tips, which is yellow.
Thank you Kon_Bar! I made the props myself, as I couldn't find an aftermarket set that looked right. What do you think is wrong with yellow ends? It is created by the colour of the blade tips, which is yellow.
18. April 2020, 19:58
Łukasz Gliński
Nice one. The props are very interesting, though the project cover pic shows they are alu with withe stripes. Anyway: how did you make these props?
Nice one. The props are very interesting, though the project cover pic shows they are alu with withe stripes. Anyway: how did you make these props?
18. April 2020, 20:47
Jasper Breur
Thanks Lukasz. I tried with the correct colours but I didn't like the way that looked. That's why I decided to go for these black and yellow props. I made my own set of Propblur photo etch propellers using clear packaging plastic, as I couldn't find a real Propblur set anywhere.
Thanks Lukasz. I tried with the correct colours but I didn't like the way that looked. That's why I decided to go for these black and yellow props. I made my own set of Propblur photo etch propellers using clear packaging plastic, as I couldn't find a real Propblur set anywhere.
18. April 2020, 21:45
April 18, 2020
April 9, 2020
20. November 2019, 17:48
View full thread (31 Comments) 
Erik Leijdens
Blijft een prachtig model jasper! Heel goed gedaan. Zoals gezgd heb ik de kit en de conversie set ook en het ziet er lastig uit om het goed te krijgen. daarom petje af
Blijft een prachtig model jasper! Heel goed gedaan. Zoals gezgd heb ik de kit en de conversie set ook en het ziet er lastig uit om het goed te krijgen. daarom petje af
7. April 2020, 09:51
Jasper Breur
Dankjewel Erik! Het was inderdaad een flinke klus, maar het resultaat mag er zijn!
Dankjewel Erik! Het was inderdaad een flinke klus, maar het resultaat mag er zijn!
9. April 2020, 16:02
Michael Phillips
Wow, this is just fantastic work! This really has to be very impressive to see in person especially. I bet pics don't do it justice. Bravo!
Wow, this is just fantastic work! This really has to be very impressive to see in person especially. I bet pics don't do it justice. Bravo!
9. April 2020, 16:10
Jasper Breur
I used the back end of a pipette for the radar, it was the closest thing to the shape I could find laying around.
I used the back end of a pipette for the radar, it was the closest thing to the shape I could find laying around.
9. April 2020, 18:39
April 6, 2020
12. June 2019, 10:18
Slavo Hazucha
Nice topic & build! I´d love to see a shot from below, if you replicated that grime & soot horror on the belly - but then it´s probably not easy to flip a finished helicopter for pictures... Did you use something special on the front canopy to get the rainbow effect? Looks really good!
Nice topic & build! I´d love to see a shot from below, if you replicated that grime & soot horror on the belly - but then it´s probably not easy to flip a finished helicopter for pictures...
Did you use something special on the front canopy to get the rainbow effect? Looks really good!6. April 2020, 12:00
Jasper Breur
Thank you very much Slavo! As you say it is a little tricky to take a picture of the underside on a fragile model like this, but believe me when I say it is nice and dirty like the picture. I used a mix of airbrushing and streaking with oil paints to achieve the effect. The effect on the glass is straight out of the box, nothing that I did to it. It is a strange effect that all Italeri clear parts seem to have. It is realistic though, so i won't complain!
Thank you very much Slavo! As you say it is a little tricky to take a picture of the underside on a fragile model like this, but believe me when I say it is nice and dirty like the picture. I used a mix of airbrushing and streaking with oil paints to achieve the effect. The effect on the glass is straight out of the box, nothing that I did to it. It is a strange effect that all Italeri clear parts seem to have. It is realistic though, so i won't complain!
6. April 2020, 14:45
April 5, 2020
March 27, 2020
March 24, 2020
20. March 2020, 21:44
View full thread (19 Comments) 
Roland Sachsenhofer
It's so beautiful! I'm overwhelmed by model making as well as by the presentation!
It's so beautiful! I'm overwhelmed by model making as well as by the presentation!
21. March 2020, 16:44
Jasper Breur
Thank you very much Markus! I had the same dream for a long time, and when I saw this kit was released I knew what to do
Thank you very much Markus! I had the same dream for a long time, and when I saw this kit was released I knew what to do
21. March 2020, 18:52
Jasper Breur
Thank you Treehugger! It was a bit tricky to get that to work, but as long as it doesn't fall down I'll call it a succes!
Thank you Treehugger! It was a bit tricky to get that to work, but as long as it doesn't fall down I'll call it a succes!
21. March 2020, 18:55
Scott Dutton
Great models and display, a unique way of having an in action display with multiple aircraft and great way to contrast the relative sizes
Great models and display, a unique way of having an in action display with multiple aircraft and great way to contrast the relative sizes
21. March 2020, 23:25
March 23, 2020
March 6, 2020
24 images
1:144
Completed
5. March 2020, 13:30
Treehugger
Wow that Eastern Express kit on the right is expensive (I mean based on new mold Eastern Express kit).
Wow that Eastern Express kit on the right is expensive (I mean based on new mold Eastern Express kit).
5. March 2020, 13:44
Jasper Breur
Yeah I know, a bit overpriced to be honest. The thing is, it's cheaper than the Eastern Express DC-10, which is even more ridiculously priced. I decided to just go for it however, because it's a great subject
Yeah I know, a bit overpriced to be honest. The thing is, it's cheaper than the Eastern Express DC-10, which is even more ridiculously priced. I decided to just go for it however, because it's a great subject
5. March 2020, 15:59
Patrick Hagelstein
I've seen this kit in my LHS for $120..... Quite steep! How are you going to obtain the needed Dutch decals?
I've seen this kit in my LHS for $120..... Quite steep! How are you going to obtain the needed Dutch decals?
5. March 2020, 20:15
Jasper Breur
Well I didn't pay that much for it, I got it for €37 so that's a fair price. The decals are in the kit already, and they look great!
Well I didn't pay that much for it, I got it for €37 so that's a fair price. The decals are in the kit already, and they look great!
6. March 2020, 09:17
Treehugger
I honestly think €37 is too much, but I also understand that everything can't have the same low price forever on (because of how the money system works).
I honestly think €37 is too much, but I also understand that everything can't have the same low price forever on (because of how the money system works).
6. March 2020, 10:07
Jasper Breur
It is indeed on the expensive side, but if you look at the ridiculous prices being asked for it I was lucky. Higher prices seem to be a common trend across all brands at the moment.
It is indeed on the expensive side, but if you look at the ridiculous prices being asked for it I was lucky. Higher prices seem to be a common trend across all brands at the moment.
6. March 2020, 17:29
March 5, 2020
March 2, 2020
February 8, 2020
February 4, 2020
wnolder.php?lang=en
2020-02-04 12:35:12
2017-10-28 20:49:14
35336
todo