Logo
scale modeling database | stash manager
Stronttydog75
Ian Doody (Stronttydog75)
GB

Ferrari 312T 1975

Comments

32 7 October 2022, 17:16
Ian Doody
Ebay gluebomb restoration project. Stripped the built parts down and cleaned them up.The beginnings of paint up. So much more do. But fun bit next, painting metallics by hand, and weathering it.
7 October 2022, 17:19
Ian Doody
Just started to block in the aluminium tub colours, only added a watered down acrylic brown/black wash. Now I wait for it to dry, then ink wash, aluminium layer, then varnish, then another light brown wash.
8 October 2022, 14:11
Kyle DeHart
Off to a quick start. You'll have it looking great in no time.
8 October 2022, 18:05
Ian Doody
First ink wash, just to put some life into the aluminium. I'll dry brush another metallic layer over this, then varnish, the do some more washes. Not a quick process, mainly due to drying times, but it looks really good.
11 October 2022, 11:32
Ian Doody
That's it for today. Still very early stage, second ink wash. It will become more subdued as I continue with layering the aluminium. This is an acceptable beginning though.
11 October 2022, 14:49
Villiers de Vos
Very nice weathering.
11 October 2022, 17:15
Jv
Taking a seat I am interested in how you strip it down I bought a few glue booms myself and not sure how to get the glue of
12 October 2022, 12:04
Ian Doody
That's it for today, and for now on this project. I've lost inspiration and desire to work on it, so back in the box, until I feel inspired to do it again. Just not feeling it, and I don't want to muck it up. Added a varnish layer, fitted the foot pedals and fixed the hole in the tub wheel bay cover.
12 October 2022, 12:27
Ian Doody
Back to the big Ferrari. The cool thing about 70s Tamiya kits, is they gave you buildable tools. It's a screwdriver and wheel nut wrench. Nice.
7 February 2023, 14:48
Ian Doody
Not a lot happening at the moment, I'm doing a lot of sanding, glueing small parts, changing bolt heads on the rear of the gearbox and brakes, as these will be seen. I'll add and swap out bolts on the black crossmember, suspension brace, as its also quite noticable. Also drilled holes in the e haust brackets, for the retention springs, Just a quick dry fit too. Even unpainted the engine is an impressive piece of hand-built model engineering from Tamiya.
7 February 2023, 14:49
Mark D
Following this one! (Have the same one waiting (with a little less glue)
7 February 2023, 15:22
Ian Doody
Scratch built the rear brake air intake cooling scoop bracket. Mad? Me? Probably 😂 there is no line down the middle, it's the crappy silver plastic. It makes dark marks appear at joins and sprue attachment points. I'll putty over the intake, then paint it to look like the clear fibreglass, suitably weathered, with a piece of tape to lesson the amount of air reaching the brakes, just like on the real thing. Exciting things ahead 😉
7 February 2023, 16:11
Ian Doody
And, yes I'm going to put in brake lines.
7 February 2023, 16:49
Villiers de Vos
Very nice progress.
7 February 2023, 18:04
Ian Doody
That's it for today, just blocked in some colour, weathering and extra details tomorrow.
7 February 2023, 19:13
Kyle DeHart
Looking good Ian!
7 February 2023, 20:45
Ian Doody
Weeeell, that's all for today. I'm knackered. Pretty good progress, I've almost finished the 312T's Transverse gearbox, added the plumbing, detail and weathering paint, painted the brake airscoops, added nuts, and painted the suspension crossbeam. Only the anti-roll bar and a bracket still to fit. Bloody good fun that was.
8 February 2023, 19:14
Ian Doody
I think this might turn out rather good.
9 February 2023, 09:08
Ian Doody
As always, doesn't look like I've done anything at all today. Finished off the anti-roll bar and brackets, made a start on the left hand side suspension lower arm, swapped nuts out for better ones, wheel mount, drive shaft and shock absorber, also made a start on the rear wing mounting bracket and battery holder.
9 February 2023, 17:46
bmod
Definitely pulling up a chair to watch this one come along. 🙂 Looks great!
9 February 2023, 17:55
Ian Doody
Not a huge update, as I've had a few days away from modelling. Finished the coil springs on both sides and the right upright and drive shaft. Haven't got to finishing the anti-roll bar yet, as I'm changing the support rods for thinner wire, so it looks more in scale. More soon.
13 February 2023, 14:45
Dominik Weitzer
looks great!
13 February 2023, 15:00
Ian Doody
Back to working on the Tamiya 1/12 1975 Ferrari 312T. Today was just to get reacquainted with the kit, remember where I was, what I had planned, and where I'm going. Tested the fit of the rear wheels and tyres, everything is just friction fitted so far, a long way to go yet. That's how good Tamiya kits are, even forty eight year old kits fit together so well. Work will continue tomorrow with the rear anti-roll bar system, as im making the connecting rods more in scale. This is going to look awesome finished.
29 May 2023, 15:40
Villiers de Vos
Welcome back at the bench Ian.
29 May 2023, 16:15
Ian Doody
As usual not a lot new to see. With one thing or another I've been busy with other things recently. But back to the rear of the 312T. Finished the gearbox, and rear suspension, anti-roll bar adjusters. Replaced the kit parts with pins, for a finer appearance.
6 June 2023, 16:08
Ian Doody
Sloooow work continues on the 312T. The Ferrari Tipo 015, 2,992 cc (182.6 cu in), flat 12, naturally aspirated, engine is a mini kit in itself. Its going to be a complicated, Spaghetti wiring job, there's twelve wires for the fuel injection and twelve wires for the electrical ignition system. Then all the water and assorted pump plumbing. but it's going to look very cool. I am going to add a few things here and there, and I've sourced some air funnel mesh guards. Also I'll be assembling the Octopuss exhaust system of twelve pipes too. Proper Italian plumbing nightmare, but it is a Ferrari lol 😆 all this is just dry fitted for now.
8 June 2023, 15:04
Kyle DeHart
Going to be a stunning powerplant.
8 June 2023, 21:10
Ian Doody
Mixed bag of modelling today, shook sticks at a few different kits. As winter is approaching, looks like I've got Ships and F1 cars in my future. I've been putting the Ferrari off for months as I worked through my Sci-Fi backlog, soo work will commence on the 1975 world championship winning F1 car, my birth year. Doing the bodywork air-intake mod, and scratch building the fibreglass valve covers, plus adding a lot of missing details, wiring and plumbing, swapping nuts n bolts, scratching the accelerator assembly, and spray painting the final bodywork for the first time... a lot to do, but it'll look very cool.
2 November 2023, 18:49
Kyle DeHart
Excellent. It's definitely going to look very cool.
2 November 2023, 22:36

Project info

141 images
1:12
On hold
1:12 Ferrari 312T (Tamiya 12019)

All albums

View all albums »