Wall
Wall
6 | 28. June 2020, 21:12
Alexander Grivonev
That's a vey nice blue, sweet build 👍 How was the kit overall? Any fitting issues? Have it on my wishlist too
That's a vey nice blue, sweet build 👍 How was the kit overall? Any fitting issues? Have it on my wishlist too
28. June 2020, 22:50
Adriano Saad
Hi Alexander! Thank you for your comments!
This kit is a challenge for any modeler.
Too many pieces and too many problems.
My first conclusion was that Aoshima designed this kit to remain open. There are a lot of holes in its alignment. The front cover doesn't fit with the front doors. The rear cover doesn't fit with the rear bumper.
The pieces are very fragile. Take care with their manipulation. Its structural joints are fragile. Reinforce them. The front suspension with the cockpit must be well joined. Use a pair of screws. Reinforce all joints of the rear bumper and with the rear bumper with the chassis.
Definitively, this kit was not designed for beginners.
Hi Alexander! Thank you for your comments!
This kit is a challenge for any modeler.
Too many pieces and too many problems.
My first conclusion was that Aoshima designed this kit to remain open. There are a lot of holes in its alignment. The front cover doesn't fit with the front doors. The rear cover doesn't fit with the rear bumper.
The pieces are very fragile. Take care with their manipulation. Its structural joints are fragile. Reinforce them. The front suspension with the cockpit must be well joined. Use a pair of screws. Reinforce all joints of the rear bumper and with the rear bumper with the chassis.
Definitively, this kit was not designed for beginners.
29. June 2020, 13:29
Alexander Grivonev
Wow, ok. A bit overengineered I see. Thanks for the great explanation! 👍
Wow, ok. A bit overengineered I see. Thanks for the great explanation! 👍
29. June 2020, 13:32
Christian W
This kit is amazing in details. I'd never build it I think. Your built is great. I like the details and painting, you've done. But it'd deserve another layer of clear coat. To late now😉
This kit is amazing in details. I'd never build it I think. Your built is great. I like the details and painting, you've done. But it'd deserve another layer of clear coat. To late now😉
31. March, 07:31
Adriano Saad
Hi Christian! I always use an acrylic clear. Unlike the 2k clears, acrylics doesn't have a ultra shine results. But yes! It could be more shinny!
Hi Christian! I always use an acrylic clear. Unlike the 2k clears, acrylics doesn't have a ultra shine results. But yes! It could be more shinny!
31. March, 20:52
Christian W
This kit is awesome and everybody has built it, has my respect. I think the kit is over the top.
This kit is awesome and everybody has built it, has my respect. I think the kit is over the top.
31. March, 22:29
Adriano Saad
Thank you, Christian! About the clear coat, I prefer the results less "love apple" shining. I think that represents better a vehicle in a day by day basis than one ultra shining, that you only saw in a show saloon or in a sales room. Thats why I use a smooth finishing.
Thank you, Christian! About the clear coat, I prefer the results less "love apple" shining. I think that represents better a vehicle in a day by day basis than one ultra shining, that you only saw in a show saloon or in a sales room. Thats why I use a smooth finishing.
1. April, 13:14
April 1, 2021
1 | 30. March, 00:32
Christian W
Beautyful color! Sadly, that you didn't paint the red plastic in the engine compartment and the undercarriage.
I like to see this model kit built.
Beautyful color! Sadly, that you didn't paint the red plastic in the engine compartment and the undercarriage.
I like to see this model kit built.
31. March, 07:19
Adriano Saad
In fact, I have prepared the kit to be finished in a polished plastic, with no painting in the body. During the work on the body, i found some failures in the plastic and, than, I decided to paint the body. Although, after painting the body with blue, I remember that I have the chassis in red, unpainted. Well, thats an aging effect, hehehe... The true is: This was a bad blue enveloping work in a red car. And that it!
In fact, I have prepared the kit to be finished in a polished plastic, with no painting in the body. During the work on the body, i found some failures in the plastic and, than, I decided to paint the body. Although, after painting the body with blue, I remember that I have the chassis in red, unpainted. Well, thats an aging effect, hehehe... The true is: This was a bad blue enveloping work in a red car. And that it!
31. March, 20:35
Christian W
The owner sprayed it over 😄
You wrote, that you wanted to polish the plastic. What do you take for it? I can't remember, to herd such technic.
The owner sprayed it over 😄
You wrote, that you wanted to polish the plastic. What do you take for it? I can't remember, to herd such technic.
31. March, 22:28
Adriano Saad
Take a look at mine GT40 Photo album. It was polished, not painted. I use a Dremel with a 90 degrees adaptor that transform the tool in a polisher. Than, plugged in a dimmer to reduce the rotation under control. After that, using cotton dishes, we should apply polishing pastes. I have used #2, Meguiars 105 and 205, finished with a carnauba wax bay hand.
Take a look at mine GT40 Photo album. It was polished, not painted. I use a Dremel with a 90 degrees adaptor that transform the tool in a polisher. Than, plugged in a dimmer to reduce the rotation under control. After that, using cotton dishes, we should apply polishing pastes. I have used #2, Meguiars 105 and 205, finished with a carnauba wax bay hand.
1. April, 13:04
March 31, 2021
4 | 30. March, 20:57
Kerry COX
I guess you have done your research on this famous beast, but I found this that may interest you too.
https://www.google.com.au/url?sa=i&url=http%3A%2F%2Fwww.grandprixhistory.org%2Fbrab46.htm&psig=AOvVaw0bI5zE8QAgD-pPGH_JR9iU&ust=1617225107940000&source=images&cd=vfe&ved=0CA0QjhxqFwoTCNCQjLH32O8CFQAAAAAdAAAAABAD
I guess you have done your research on this famous beast, but I found this that may interest you too.
https://www.google.com.au/url?sa=i&url=http%3A%2F%2Fwww.grandprixhistory.org%2Fbrab46.htm&psig=AOvVaw0bI5zE8QAgD-pPGH_JR9iU&ust=1617225107940000&source=images&cd=vfe&ved=0CA0QjhxqFwoTCNCQjLH32O8CFQAAAAAdAAAAABAD30. March, 21:14
Kerry COX
It may be I have looked up the incorrect car, as this kit is minus the big 'fan' in the rear, OR, am I wrong.
👍
It may be I have looked up the incorrect car, as this kit is minus the big 'fan' in the rear, OR, am I wrong.
👍30. March, 22:57
Peppy
WOW!
Extremely realistic engine and compartment.
Looks like it could start and idle.
The rest of the build is a knockout too.
WOW!
Extremely realistic engine and compartment.
Looks like it could start and idle.
The rest of the build is a knockout too.
31. March, 02:26
Adriano Saad
Hi Kerry! You are wrong. This kit is the BT46 version. The version with the rear fan was the BT46B.
Hi Kerry! You are wrong. This kit is the BT46 version. The version with the rear fan was the BT46B.
31. March, 20:24
31. March, 22:44
Project: Ferrari 312T3 - Refurbishing
1+
1+26. July 2018, 19:38
Patrick Hagelstein
These first 6 picture are still the 'before' situation I guess?
These first 6 picture are still the 'before' situation I guess?
27. July 2018, 13:45
Patrick Hagelstein
Looks like a daunting project... Good luck! I'll be watching it with interest.
Looks like a daunting project... Good luck! I'll be watching it with interest.
27. July 2018, 16:19
bossy122
Now you can go back and strip that chrome and paint it with Alclad or Spaztix, and ace the mould seam on the end plates, which should be red on the front wing.
Now you can go back and strip that chrome and paint it with Alclad or Spaztix, and ace the mould seam on the end plates, which should be red on the front wing.
27. July 2018, 18:07
Adriano Saad
Thank you for your comments.
The problem is... we don't have Aclad easily in Brazil and never heard about Spaz Stix (You Tube show me now).
In this job i have used the Molotow ink refil with airbrush. Very easy to apply and we can jump one step: Molotow doesn't need a glossy black base to shine.
The front wing wasn't red. Take a look on the image below.
[img1]
Thank you for your comments.
The problem is... we don't have Aclad easily in Brazil and never heard about Spaz Stix (You Tube show me now).
In this job i have used the Molotow ink refil with airbrush. Very easy to apply and we can jump one step: Molotow doesn't need a glossy black base to shine.
The front wing wasn't red. Take a look on the image below.
[img1]
27. July 2018, 19:14
4 | 30. March, 20:46
Mark
A beautiful blast from the past. I remember the P34 racing in the '76 and '77 F1 seasons.
A beautiful blast from the past. I remember the P34 racing in the '76 and '77 F1 seasons.
30. March, 21:32
March 30, 2021
March 29, 2021
DTMFebruary 23, 2021
Alfa Romeo
December 11, 2020
September 20, 2020
wnolder.php?lang=en
2020-09-20 13:57:35
2015-08-11 02:29:51
20872
todo