WiP
Comments
1 17 January 2017, 14:12
Julian Herrero aka YuriGood work ... I'll be following since I've got this kit in WIP ,,,,,
17 January 2017, 20:01
Łukasz GlińskiFolllowing, as this is gonna be a beauty, I'm sure of it already
18 January 2017, 10:56
Julian Herrero aka YuriLooks good ... keep on the good work .... did you had problems gluing the wins to the fuselage ?
20 January 2017, 10:28
Murad ÖZEREkki, Lukasz thanks a bunch.
Julian, thank you too. If you have seen Dragan's build on ARC that he praised the kit's fit and overall to be very good. Unfortunately my experience is totally opposite; there is NO joint that didn't require force, swearing, putty and sanding on this build! as for the wings, eventho the sides were flush the underside of wing to fuselage joint was proud on both ends, so yes it was problematic.
What's interesting is that all the problems are manageable with a bit of effort and the result is worth it no matter what 🙂
20 January 2017, 10:35
Lutz SchrammIt looks good - I´ll keep whatching ... which markings do you choose?
20 January 2017, 12:06
Murad ÖZERJulian, my suggestion for the under side would be to sand until flush, no other way around it unfortunately 🙁 for the rest of the gaps i used CA as filler and sanded wet than rescribed. don't fret about scribing, only a couple of straight panel lines here and there, nothing intricate.
Lutz thank you, it will be the tiger striped one, yellow and brown camo.
Marc thanks a lot.
20 January 2017, 13:53
gorbyThose ejector seats are amazing for 1/72 - they would be pretty good for 1/48!
20 January 2017, 16:50
Bart Goesaertnice paintjob, how do you clean the polishing compound? Regular water?
23 January 2017, 08:28
Murad ÖZERMarc, Spanjaard thanks lads.
Bart, yes water tru airbrush takes care of the trapped ones in the details.
23 January 2017, 11:53
