Dornier Do J II "Wal"

Instructions

More instructions!

All You need!

Large decal sheet for 4 marking options.

Optional parts for the different versions ( military or airliner)

This is what I call a wing 🙂

Note this different engines !

Clear parts for an open or closed cockpit

And here we go!





New decal sheet from Peddinghaus.

Test fit of the canopy, poor fit 🙁

Only minor filling needed at the fuselage

Removed some material around the conopy area.

Test fit again...

Much better now !

Test fit of the upper wing. Perfect!

This will be a nice bird from my favourite manufacturer HUMA.







3 layers of Alclad Aqua Gloss for a shiny finish...

Some Micro Set and Sol...

Not too bad... another layer of Alclad when everything is dry tomorrow.






Good old Tamiya Tape and a sharp blade to mask the canopie

Fit is ok.















Comments
2 18 August 2015, 21:01

Super, ein Flugboot für die Scalemodel Trophy. Eine sehr gute Wahl Christian. Da bist du nämlich zusätzlich auch gleich im Rennen um die "Schneider Trophy" - ein Spezialpreis für das beste Modell eines Wasserflugzeugs. Ich wünsche Dir gutes gelingen und viel Erfolg.
18 August 2015, 21:14

Danke schön! Das mit dem Sonderpreis war jetzt wirklich reiner Zufall. Ich wollte den Wal immer schon mal bauen und dachte mir nimm doch mal etwas Älteres für den Wettbewerb. Ich mag die alten Huma Kits nun mal...😉
18 August 2015, 21:24

Kannst du feststellen, wie alt der Bausatz ist? Falls er Baujahr 1979 oder älter ist, könntest du dich damit auch in der Kategorie A4 Aircraft vintage anmelden. Dafür gibt es ein paar spezielle Regeln. Siehe hier: scalemodeltrophy.eu/category_a4.htm
18 August 2015, 21:32

So weit ich weiß ist der Bausatz 1991 erschienen. In den 70 zigern gab es Huma wohl noch gar nicht. Aber der Tipp mit der Kategorie A4 hat was. Ich habe da noch so ein paar Raritäten von Heller und Du bringst mich da gerade auf eine Idee...
18 August 2015, 21:54

Hi Leute! Also erstmal an Christian: Herzlich Willkommen beim Wettbewerb! Freut mich sehr, dass Du die Wal baust, ist auch eines meiner Favoriten. Ich habe gerade auf dem Karton meines Wal´s nachgesehen. Dieser hat eine fünfstellige Postleitzahl des Herstellers. Ist also 1993 oder später produziert. Bin schon gespannt auf Deine Bilder...
18 August 2015, 22:13

Danke Dir Thomas! Karton hatte ich nicht, meiner war in einer Tüte verpackt. Ist wohl die Erstauflage.
18 August 2015, 22:22

Super, der Wal kommt aus der Tüte ! Den hätte ich auch gerne wie Du weißt. Freue mich drauf ! 🙂
19 August 2015, 06:58

Genau, der Wal aus der Tüte... 🙂 Thank You all for Your interest.
19 August 2015, 07:32

Aha, hier geht's als mit dem Wal los. Hast Du etwa "wahllos" in den Stash gegriffen? LOL
19 August 2015, 08:36

@ Holger: Das ist wie bei den Unterhosen im Kleiderschrank. Immer die nehmen die gerade oben auf dem Stapel liegt.
19 August 2015, 09:45

Welche Version wird es denn werden Christian ? Hoffentlich der Grönland- Wal ?
20 August 2015, 17:26

@Hanno: Ich hatte da eher mehr an den Lufthansa "Monsun" gedacht. Hast aber Recht. Eigendlich müsste man das Teil 4X bauen. Jede Variante hat Ihren Reiz. Ich brauche dann nur noch 3 zusätzliche Bausätze... und die sind leider eher rar gesäht.
20 August 2015, 21:31

Rar und teuer, ich habe mal in der Bucht geguckt - knapp € 50,- sind dann doch ein bisschen happig......
21 August 2015, 06:25

Stimmt, bei 30€ ist bei mir auch Schluß. Es wundert mich sowieso das bislang niemand die Huma Formen zu neuem Leben erweckt hat.
21 August 2015, 09:19

Na los Christian, dann lass uns investieren! Ich wollte schon immer eine Modellbau Firma haben!
21 August 2015, 09:56

@ Holger: So abwegig ist das nicht. Die Formen sind zu verkaufen. Wenn jetzt noch jemand zufällig ne Spritzgußmaschine über hat kann das so losgehen. Platz für das Ding habe ich wohl.
21 August 2015, 12:49

Ich meine das auch garnicht abwegig! Ich bin für sowas zu haben!
Mal gucken wo man ne Spritzgußmaschine herbekommt... Amazon? E-Bay? 😄
21 August 2015, 12:56

Aber wäre es nicht einfacher die Formen einfach an einen namhaften Hersteller zu verleihen und zu sagen: Mach mir 1000 Stück dann darfst Du 100 behalten! (jetzt nur mal als Beispiel)
21 August 2015, 13:03

Oder mach mir X Stück, dann darfst Du die Form ein Jahr benutzen.
21 August 2015, 13:04

Nur mal so aus Interesse - was wird denn für die Formen aufgerufen, weiß Du das auch Christian ?
21 August 2015, 14:00

Ok, Ok!
@ Holger: Keine schlechte Idee, aber...
@ Hanno: Hab vor zwei Jahren schon mal gefragt, weiß aber nicht ob der Preis noch steht.
Alles Andere bitte unter christian.meyerhoff(ät)t-online.de
Bis dann!
21 August 2015, 19:30

Some small progress. The main components are finished. No trouble so far. The fit of this kit is excellent.
3 September 2015, 18:25

Schönes Vorbild! Die Wal ist und bleibt immer noch eines der interessantesten Flugboote. Bin schon gespannt, wie´s weitergeht.
3 September 2015, 18:30

Danke Dir Sven ! Der Wal ist wirklich interessant.
Schau mal hier: Youtube Video

3 September 2015, 18:47

Most interesting Christian, I am excited about your choice! The "Wal" is an enigmatic flying boat- your modelling skills will turn out into another masterpiece!
1 November 2015, 06:13

Thank You Roland. I`m still waiting for my new decal sheet from Peddinghaus. Than this build will continue.
1 November 2015, 09:09

Good news...🙂 Today I got my new decal sheet from decals.guenstigergeht.net/ As always it looks perfect. So this build will continue by next weekend.
4 November 2015, 19:13

Many Thanks Stephane! I like Huma kits a lot and with the new decal sheet I can complete this one as well. 🙂
10 November 2015, 20:40

Made some good progress on my Wale. Time to paint this one. 🙂
13 November 2015, 16:26

Time to paint. As usual I use Humbrol paints fot this one.
15 November 2015, 18:28

That´s a real cool project- and it´s looking quite good! I am really keen to see more progress pics.
Will be interesting to see how you get these highly attractive red outlines on the hull´s surface
15 November 2015, 18:47

Many thanks Roland! There will be no red outlines, because I think that they are wrong. I stressed the internet for pictures and videos, but could not find any source which show these lines. Huma wants You to paint the lower fuselage and wings in silver, but I don't believe this. If there is anybody out there who has any additional information about the paint job of a Wale, most welcome 🙂
15 November 2015, 18:58

Started with the decals on the wings. These decals from Peddinghaus work excellent.
16 November 2015, 20:23

avialogs.com/
avialogs.com/index.p..ny/dornier/do18.html
Christian, I have sent you this link because it covers just about all know aircraft and their service manuals, and there might just be some information there for you.
16 November 2015, 20:24

Todays progress. Painted the engine details with black oil paint and did a little weathering.
17 November 2015, 19:26

The Dornier Wal is one of my favourite planes - maybe I should looking for a kit myself ...
17 November 2015, 20:53

Hallo Christian, das schaut richtig gut aus. Du bist Mr. Huma 🙂
17 November 2015, 20:55

@ Thomas: If You see one, grab it! They are hard to get. The fit of the parts is okay, only minor issues to deal with. The worst thing are the decals. They are useless due to their age. But there is Mr. Peddinghaus who created a new sheet for me and everybody else as well. 🙂
@ Marcel: Danke! Immer wenn ich kompliziertere Sachen baue, wie derzeit den 48 ger UHU, muss auch mal Abwechslung her. Dann schiebe ich wohl mal einen Huma Bausatz dazwischen. Ich mag die Dinger eben 🙂
17 November 2015, 21:07

Habe den Wal Karton rausgesucht und mir die Spritzlinge angeschaut.... Ich mag sie auch. Möchte sie nur nicht mit meinen begrenzten Fähigkeiten versau....
Kämpfe weiter mit der Wildcat und Hellcat 🙂
17 November 2015, 21:14

Many thanks Clifford!
@ Marcel: Der Vogel baut sich ohne Probleme. Der einzige Tip den ich Dir geben kann ist erst die Rumpfhälften zu verkleben und dann das komplette Cockpit von oben einzubauen. Dann passt das besser. Ansonsten keine bösen Überraschungen.
18 November 2015, 06:16

Wow, this is basically one of my favorite all-time airplanes! I wasn't even aware that there is a kit available!
18 November 2015, 14:17

Many thanks Martin! This kit is from the German Company Huma, which does not exist anymore. Meanwhile it`s rather hard to get one.
18 November 2015, 14:32

Today`s progress. Dipped the canopie into Future and masked it with Tamiya Tape. Glued the canopie in place. Time to finish the paint job on the fuselage.
18 November 2015, 19:54

Today`s progress. Wings and fuselage united. I think that I can finish this one tomorrow.
21 November 2015, 19:49

Boohoo, I'm jealous !!! Wonderful work Christian, nice and gently weathered. I will continue to look out for one like that, maybe one fine day....... 🙂
22 November 2015, 17:51

You can be satisfied with the end result. Another beautiful piece. The paintwork is also top.
22 November 2015, 18:34

Many thanks Holger! It's another great kit from Huma which no other manufacturer provides since today. Maybe the people from Special Hobby get aware of this great subject.😉
22 November 2015, 18:58

You did a marvellious and inspiring work, Christian! I am really enjoying these pictures and your skill....
And, as some other folk here, you have infected me with the "Wal-Virus"- thank you for that! 🙂
22 November 2015, 20:29

Ain't no medication available for this desease, that's for sure....... 😄
22 November 2015, 20:31

😉 So many wishes.. but only a few kits around... 🙂 THANK YOU !!!
Take a look at this please:
amazon.de/gp/product..p;s=books&sr=1-2
It was a good reference.
22 November 2015, 20:37

What a wonderful sight that aircraft would be today mate. 🙂
As how you have presented it now is a most impressive effort on your part. 👍.
Congratulations Christian. 🙂 👍
22 November 2015, 20:46

Congratulations! A beautiful plane and a beautiful model! Also nicely documented from start to finish!
My experience with the Wal date back a few years and were 100% virtual when I "made" a whale for the flight sim X-Plane. Here's a link into the past forums.x-plane.org/i..ds&showfile=5146 Some model company should have mercy and release a new Wal...
23 November 2015, 18:13

Many thanks mates!
@ Martin: You are right, it`s time for a new whale! 🙂
23 November 2015, 19:20

Maybe an idea for a new Scalemates feature: the Most Wanted list? With enough votes for a particular subject, maybe some kit producer steps up to make iit?
24 November 2015, 16:51

Many thanks Chris! Next project? Please take a look at my albums here on SCM and You will know on what subjects I`m working. But the very next model I want to complete is my UHU for the Groupbuild. I spent so much hours on this one, so it`s time to finish it.
24 November 2015, 19:18

Super gelungen Christian, Gratuliere zu einer so tollen Arbeit!
24 November 2015, 20:38