Logo
modelarska baza danych | zarządzanie magazynem

Aircobra Airbrush

Ammo by Mig Jimenez | Nr. A.MIG-8625

Boxart Aircobra Airbrush A.MIG-8625 Ammo by Mig Jimenez

Fakty

Marka/Wydawnictwo:
Ammo by Mig Jimenez
Tytuł:
Aircobra Airbrush
Numer:
A.MIG-8625
Skala:
No
Rodzaj:
Narzędzia
Wydane:
2018
kod kreskowy:
8432074086253 (EAN)
Temat:
Airbrushes » Malowanie (Przybory)

Instrukcje

Pobierz 6457Kb (.pdf)

Giełda

Sklepy internetowe
Logo MegaHobby.com
USD 188.99
USNa stanie »
Logo Der Sockelshop
€ 139.15
DE USD 156.74Na stanie »
Logo Plastmodel
zł 592.80
PL USD 154.90Brak na stanie »

Alternatywne jednostki SKU dla Ammo by Mig Jimenez A.MIG-8625:
AMIG8625 | EXPO-MIG8625 | 8625 | AMMO-8625 | AMIG-8625 | A.MIG8625

Uwaga: Ceny i dostępność są tylko wskazówkami. Sprawdź dokładnie, czy produkt rzeczywiście pasuje!

Recenzja zawartości

Recenzje zewnętrzne

Nie wiemy nic o recenzjach na ten temat Aircobra Airbrush (#A.MIG-8625) z Ammo by Mig Jimenez.

Komentarzy

Yves
An effective airbrush with a 0.33mm nozzle ;
simple to use and to clean ;
Very good for medium-fine, medium and semi-wide works on scale models.

Strong, but it needed a good disassembling and cleaning before first use (seized and sticky mechanism)
15 September 2022, 13:31
Urban Gardini
That's normal for all Badger airbrushes. All that I've had and still have plus airbrushes that I've fixed for pals of mine have had manufacturing residues in the body. Coarse threads have also been an issue that have been better with time the more it's used. Lubricant all threads as well as the trigger and the spring in the needle action with Iwata's (not the blue one) or Badger's lube. Yes I say Badger as AMMO's airbrushes is their own Omni model that they produce for AMMO with specs that AMMO have chosen for them. It's a good workhorse airbrush.
15 September 2022, 14:03
Yves
Totally agree with you about Badger/Ammomig airbrushes "family" ;
Need a good check, cleaning and lubrication, then get ready for years of happy use.
It's really to know when buying these tools.
I remember having some problems with Badger counter balance handle for Badger 100-150, purchased separately : it screwed very badly on my Badger 100 body ; so I asked my seller to replace it (badly machine thread), then it was Ok.
Another problem I 've encountered with Ammomig (yes, Badger) Aircobra spare parts : Ammomig finger rest réf: 8663 & 8664 : intended to improve the Aircobra airbrush, I never managed to install it on my airbrush...
16 September 2022, 09:45
Urban Gardini
Yes, I do love the balance on my Sotars but I've got other airbrushes that gets the job done for me so I seldom use my Badgers nowadays. It's more or less Mr Hobby or Iwata that is my go to airbrushes nowadays. As for the finger rest, try heat it up first with near boiling water first and then push it in place. Wait until it's cooled off before you tighten the lock screw.
16 September 2022, 16:31
Yves
Hi Urban,
Thanks for this idea. Yes, why not. I'll try so.

But Anyway I 'm going to report this issue to the manufacturer. Completely abnormal.

21 September 2022, 13:58

Airbrushes

Materiał referencyjny

Airbrushing Techniques: Getting Started DVD (Kalmbach Media )
Airbrushing Techniques: Getting Started DVD Learn to airbrush start to finish
Aaron Skinner
2018 Cyfrowy
Airbrush im Modellbau (GeraMond Verlag )
Airbrush im Modellbau Farbe auf Stand- und Funktionsmodellen
Mathias Faber
2015

Wszystkie książki » (9 razem)