Vegg
Wall
April 1, 2024
Ludvík Kružík
la til et nytt fotoalbum
la til et nytt fotoalbum
JAS-39C Czech Air Force no. 9234 - Centennial - WIP
149 bilder
1:48
The front undercarriage leg is complete. To get a better idea of its size I photographed it together with a regular match.
Prosjekt: JAS-39C Czech Air Force
All comments (130) » 78 27 November 2023, 19:59
Ludvík Kružík
Thank you, Robert. I've only finished the front landing gear leg so far. I started with it because it's the most complicated. Filling the "tubes" on the main landing gear legs will go faster. Compared to the front landing gear, they are almost wiring free.
Building the finished model on a mirror base is a good idea. However, I have a slightly different solution. The model will be placed in my display case of finished models on a glass shelf that is approximately eye level (of an adult). If you lean slightly forward, you can see the bottom of the aircraft with the armament and landing gear due to the glass shelf.
Thank you, Robert. I've only finished the front landing gear leg so far. I started with it because it's the most complicated. Filling the "tubes" on the main landing gear legs will go faster. Compared to the front landing gear, they are almost wiring free.
Building the finished model on a mirror base is a good idea. However, I have a slightly different solution. The model will be placed in my display case of finished models on a glass shelf that is approximately eye level (of an adult). If you lean slightly forward, you can see the bottom of the aircraft with the armament and landing gear due to the glass shelf.
1 April, 10:20
March 31, 2024
Ludvík Kružík
la til et nytt fotoalbum
la til et nytt fotoalbum
All comments (6) » 15 10 October 2020, 21:35
Trez Mackenzie
Great kit! I'm wondering how you did such a good job on the antenna wire? How was that amazing engine to put together? The wiring looks complicated and I cannot help but wonder that it must be very difficult to build
Great kit! I'm wondering how you did such a good job on the antenna wire? How was that amazing engine to put together? The wiring looks complicated and I cannot help but wonder that it must be very difficult to build
29 March, 15:13
Ludvík Kružík
Trez, thank you for your praise and interest in my model.
The antenna on this model is made of fishing line (diameter 0,14 mm), glued with CA glue. After gluing, I painted the antenna "wires" with dark steel shade paint. The insulators are marked with a drop of thick white paint. If necessary, after the paint dries, the insulator can be enlarged by adding another drop of thick white paint.
The engine is a separate kit and can be found on Eduard's website under catalog number 648250 and the title Bf 109G-6 1/48 engine and fuselage weapons. The kit also includes a clear instruction sheet. The instructions will safely guide you through the entire engine build step by step. The instructions also include paint shade recommendations for each engine part and instructions for building the engine into the fuselage.
If you already have some experience working with resin accessories and follow the instructions when building the engine, the build is not too complicated. Complete instructions for building the engine are available on Eduard's website: eduard.com/out/media/648250.pdf.
Trez, thank you for your praise and interest in my model.
The antenna on this model is made of fishing line (diameter 0,14 mm), glued with CA glue. After gluing, I painted the antenna "wires" with dark steel shade paint. The insulators are marked with a drop of thick white paint. If necessary, after the paint dries, the insulator can be enlarged by adding another drop of thick white paint.
The engine is a separate kit and can be found on Eduard's website under catalog number 648250 and the title Bf 109G-6 1/48 engine and fuselage weapons. The kit also includes a clear instruction sheet. The instructions will safely guide you through the entire engine build step by step. The instructions also include paint shade recommendations for each engine part and instructions for building the engine into the fuselage.
If you already have some experience working with resin accessories and follow the instructions when building the engine, the build is not too complicated. Complete instructions for building the engine are available on Eduard's website: eduard.com/out/media/648250.pdf.
31 March, 11:51
March 20, 2024
March 17, 2024
March 16, 2024
Ludvík Kružík
eier nå
eier nå
Walter NZ-60 Engine Set for Avia BH-9/10/11 Smer/Kovozávody Prostějov
MH Models 1:48
K48018 2024 New tool 16 March, 16:56
Ludvík Kružík
eier nå
eier nå
Walter NZ-60 Engine Set for Avia BH-9/10/11 Smer/Kovozávody Prostějov
MH Models 1:48
K48018 2024 New tool 16 March, 16:55
Ludvík Kružík
eier nå
eier nå
Avia BH-9 "Boska" Scale in the deion 1:48, real scale 1:50
Kovozávody Prostějov (KP) 1:48
KPM4818 2021 Nye deler 16 March, 16:52
March 14, 2024
February 15, 2024
February 8, 2024
January 24, 2024
Ludvík Kružík
la til et nytt fotoalbum
la til et nytt fotoalbum
JAS-39D Czech Air Force no. 9820 - Decennial - WIP
33 bilder
1:48
I placed the instrument panels and pilot seats in the cockpits without gluing just for testing.
Prosjekt: JAS-39D Czech Air Force
All comments (17) » 20 10 December 2023, 23:06
Rando
A double delta build! I missed this. How is it putting together the Kitty Hawk? I've heard they're generally kind of notorious to put together. Although I think what would really keep me from building one is how ludicrously expensive they seem now that the company folded.
A double delta build! I missed this. How is it putting together the Kitty Hawk? I've heard they're generally kind of notorious to put together. Although I think what would really keep me from building one is how ludicrously expensive they seem now that the company folded.
24 January, 00:05
Ludvík Kružík
Welcome, Rando!
Kitty Hawk is coming together pretty well. Compared to the Italeri kit, Kitty Hawk is much better to assemble. You can't avoid working with the putty, but it's not a tragedy. It's just minor gaps between some of the parts.
As for the high price of the kit, I got lucky and managed to buy the Gripen on sale for almost half the price.
Welcome, Rando!
Kitty Hawk is coming together pretty well. Compared to the Italeri kit, Kitty Hawk is much better to assemble. You can't avoid working with the putty, but it's not a tragedy. It's just minor gaps between some of the parts.
As for the high price of the kit, I got lucky and managed to buy the Gripen on sale for almost half the price.
24 January, 00:49
January 16, 2024
January 14, 2024
January 4, 2024
Ludvík Kružík
la til et nytt fotoalbum
la til et nytt fotoalbum
A look back to 2023
28 bilder
Fokker D.VII
The most challenging part of this model was working with the decals. Because the whole machine is camoufla...
All comments (12) » 13 2 January, 16:02
December 29, 2023
December 20, 2023
December 10, 2023
Ludvík Kružík
la til et nytt fotoalbum
la til et nytt fotoalbum
Mi-24D Czech Air Force, 4011 Zipper Tiger - first design - Completed
24 bilder
1:48
Prosjekt: Mil Mi-24D Czech Air Force, 4011 Zipper
All comments (11) » 42 6 November 2023, 00:13
December 8, 2023
November 26, 2023
Ludvík Kružík
la til et nytt fotoalbum
la til et nytt fotoalbum
Zetor 25 ‘Military w/Towbar for MiG 15/17s’, CMK 1:48
10 bilder
1:48
Prosjekt: Zetor 25- Czechoslovak Air Force
All comments (12) » 22 19 November 2023, 22:00
bughunter
Well done - will look nice with a plane on the two bar. Nice color contrast: green Zetor - red bar - alu plane 😉
Well done - will look nice with a plane on the two bar. Nice color contrast: green Zetor - red bar - alu plane 😉
24 November 2023, 18:12
Ludvík Kružík
Thanks bughunter!
I'm thinking the same thing. I still have to build a MiG-15. I have the kit, now I'm looking for a color scheme of the machine with some interesting coloring. I also want to add some figures, a tractor driver and possibly some technicians.
Thanks bughunter!
I'm thinking the same thing. I still have to build a MiG-15. I have the kit, now I'm looking for a color scheme of the machine with some interesting coloring. I also want to add some figures, a tractor driver and possibly some technicians.
26 November 2023, 21:51
November 25, 2023
Ludvík Kružík
la til et nytt fotoalbum
la til et nytt fotoalbum
Zetor 25 - Czechoslovak Air Force - WIP
28 bilder
1:48
I've filled in the final details. The model is finished.
Prosjekt: Zetor 25- Czechoslovak Air Force
All comments (12) » 16 7 November 2023, 22:49
bughunter
Great work on a nice little kit! Did you use a primer on the resin parts?
Great work on a nice little kit! Did you use a primer on the resin parts?
24 November 2023, 18:09
Ludvík Kružík
Thank you bughunter! I really appreciate your words.
I didn't use any primer. The paints are sprayed directly onto the resin. I was worried that multiple layers of paint would cause some of the fine detail to be lost.
The only touch up before spraying the paint was to sand the surface of the model with fine sandpaper (#2000) and wash the entire model with detergent and then dry.
Thank you bughunter! I really appreciate your words.
I didn't use any primer. The paints are sprayed directly onto the resin. I was worried that multiple layers of paint would cause some of the fine detail to be lost.
The only touch up before spraying the paint was to sand the surface of the model with fine sandpaper (#2000) and wash the entire model with detergent and then dry.
25 November 2023, 15:59
November 7, 2023
Ludvík Kružík
la til et nytt fotoalbum
la til et nytt fotoalbum
Mi-24D (Hind D) Czech Air Force, WIP
456 bilder
1:48
For now at least a picture of the box. :) Photos of the build will follow soon.
Prosjekt: Mil Mi-24D Czech Air Force, 4011 Zipper
All comments (259) » 126 20 April 2023, 21:56
October 31, 2023
October 26, 2023
October 19, 2023
October 6, 2023
October 5, 2023
Ludvík Kružík
la til et nytt fotoalbum
la til et nytt fotoalbum
All comments (63) » 39 24 February 2021, 21:17
September 27, 2023
September 17, 2023
Ludvík Kružík
la til et nytt fotoalbum
la til et nytt fotoalbum
All comments (6) » 11 16 September 2023, 20:01
bughunter
Complicated scheme and good work!
I tend to avoid decals and try to mask as much as possible. But not hand cut but prepared by drawing with software and let the masks cut.
But such complicated paint on the tail here will need decals.
Complicated scheme and good work!
I tend to avoid decals and try to mask as much as possible. But not hand cut but prepared by drawing with software and let the masks cut.
But such complicated paint on the tail here will need decals.
17 September 2023, 13:34
Ludvík Kružík
@Alec K
@bughunter
I was so intrigued by the colour scheme of this glider and the story of its pilot that I decided to go for it as soon as I discovered it. Moreover, a Slovak pilot flew this glider, so my area of interest was filled - machines of Czechoslovak pilots.
As I mentioned, I built the model a few years ago and it was my first attempt at home-made decals and masks. The model is far from perfect, but it still makes me happy.
@Alec K
@bughunter
I was so intrigued by the colour scheme of this glider and the story of its pilot that I decided to go for it as soon as I discovered it. Moreover, a Slovak pilot flew this glider, so my area of interest was filled - machines of Czechoslovak pilots.
As I mentioned, I built the model a few years ago and it was my first attempt at home-made decals and masks. The model is far from perfect, but it still makes me happy.
17 September 2023, 14:19
September 16, 2023
September 13, 2023
September 12, 2023
September 10, 2023
August 29, 2023
August 19, 2023
Ludvík Kružík
la til et nytt prosjekt
la til et nytt prosjekt
All comments (5) » 1 14 September 2021, 22:57
Ludvík Kružík
There are currently no photos of the completed model. I built this model at a time when I didn't pay as much attention to photographing finished models as I do now. 🙁
There are currently no photos of the completed model. I built this model at a time when I didn't pay as much attention to photographing finished models as I do now. 🙁
18 August 2023, 22:11
August 18, 2023
Ludvík Kružík
la til et nytt fotoalbum
la til et nytt fotoalbum
Avia BH-3 - aircraft fuselage construction
26 bilder
1:48
Prosjekt: Avia BH-3 scratch build
Scratchbuilt
All comments (9) » 10 8 October 2020, 20:51
Ludvík Kružík
For those interested, the album with the completed model is here: Avia BH-3 - finished model | Album by KLuK (1:48)
For those interested, the album with the completed model is here: Avia BH-3 - finished model | Album by KLuK (1:48)
18 August 2023, 19:50
July 5, 2023
July 4, 2023
June 17, 2023
May 3, 2023
April 27, 2023
April 24, 2023
Ludvík Kružík
la til et nytt fotoalbum
la til et nytt fotoalbum
Fokker D.VII, czechoslovak airforce - summer 1919
21 bilder
1:48
Prosjekt: Fokker D.VII, Czechoslovak Air Force
All comments (5) » 17 23 April 2023, 14:38
Neuling
Very beautiful models, looking forward to see more of the kind .............
Very beautiful models, looking forward to see more of the kind .............
24 April 2023, 08:29
Ludvík Kružík
Glad you like the models. Now I will leave them for a while and will be building a Mi-24 helicopter, but later I will come back to the aircraft from the early days of Czechoslovak aviation.
Glad you like the models. Now I will leave them for a while and will be building a Mi-24 helicopter, but later I will come back to the aircraft from the early days of Czechoslovak aviation.
24 April 2023, 17:31
wnolder.php?lang=no
2023-04-24 17:31:00
2020-04-23 00:09:08
69549
/ajax/wnolder.php?lang=no&sd=2023-04-24 17:31:00&md=2020-04-23 00:09:08&filter=&w=69549
todo