modelbouw databank | stash manager
Mahoo76
Martin Oostrom (Mahoo76)
NL

Tamiya Bell X-1

Opmerkingen

2 13 June 2017, 18:30
Ekki
Watching.
13 June 2017, 18:42
Łukasz Gliński
This is what I keep mine for too 😄 Following of course
13 June 2017, 18:51
John Thomas
Nice work
19 June 2017, 12:17
Martin Oostrom
Thanks Lukasz & John.
Lode, that would be edition 10 Testpilots.Had to check in my collection8)
22 June 2017, 21:09
Clifford Keesler
Nice.
22 June 2017, 21:35
Martin Oostrom
I. Dont. Get. It.
I used one 5 ml cup of primer in my airbrush. It started out reasonable, turned too dry and finished too thin. It almost seems as if the paint is sinking from the carrier fluid. After a couple of minutes I het a whitish film on top of the paint in my cup. And this is during spraying. I'm sure I shook the bottle long enough.
25 June 2017, 14:15
Martin Oostrom
I still don't get it. Sanded the black primer smooth. Wanted to add white scribbles as a form of preshading. Used Mig's One shot primer white. Dilluted it with some acryllic thinner, also from Mig.
Test scribbles on a bit of plastic went fine. Then the airbrush clogged up, threw grainy bits of paint. I already lowered the recommended airpressure, dilluted the paint. AAAAAAAAAAAAAAGH!
I now guess that primers don't agree with my 0.2 nozzle.
This project looks jinxed 🙁
25 July 2017, 14:46
Martin Oostrom
Hi Lode, I hope you're wrong. My airbrush is less than a year old and not much used, I bought it new. The problems I have are with Mig's primers. I'll do some testing with my 0.4 needle and with other paints.
Thanks for thinking along!
Martin
25 July 2017, 20:06
Martin Oostrom
Painted the orange with my 0.4 needle. Went well.
For this bright colours, I'm not so sure Michael Phillips' blackbasing works. If you look at the canopy, you'll see its way more bright than the rest of the plane. I had to use much paint to get this bird orange. On the other hand, the blackbasing kept it from being too Orange.
What do you guys think?
13 August 2017, 15:14
Soeren R.
I must admit that its a little bit to dark in my opinion.
Here a pic of the Glamorous Glennis
airandspace.si.edu/collection-objects/bell-x-1

Black basing is a nice technique - no question ask - but I think it doesnt work so well with "bright" colors like the orange of the X-1.
You can see this in Matts videos. It looks great, but it gets really dark.
Youtube Video
 


Mine will be white primer, yellow "base" coat, pre shading with a red brown and then the orange.
13 August 2017, 15:38
Martin Oostrom
Sören, I'd love to say you're wrong, but you're absolutely right. I guess I'll have to pretend mine is seen at night 😉
13 August 2017, 15:46
Soeren R.
😢 It still looks good Martin. The paint job is nicely done.
13 August 2017, 15:47
Soeren R.
Btw are you gonna to repaint the canopy,
because the struts of the canopy are painted in black😉
13 August 2017, 15:50
Martin Oostrom
No I won't. This is one of grey styrene. I've got the clear one separately. That bit I did think through.
But thabks for the advice. Appreciate it 👍
13 August 2017, 16:06
Martin Oostrom
Blackbasing didn't work as planned. Had to use so much orange paint, some panel lines seem flooded. Will have to see what a wash will do.
15 August 2017, 16:01
Martin Oostrom
Thank you Lode & James
15 August 2017, 20:09
Martin Oostrom
Decals on. Unmasked the canopy. To do: add undercarriage.
I'm doubting whether to give it a wash. Some panellines near the front are alnost flooded with orange. I don't feel like I could get a decent result. She Could look better, now its a whole lot of orange.
Need to sleep on it.
22 August 2017, 19:09
Spanjaard
looking nice
question, you use the aluminium foil to get the lines to be masked and use that to cut the mask? seems a good idea!
23 August 2017, 06:46
Martin Oostrom
Thanks Lode & Spanjaard.
The aluminum is used to 'lift' the lines. Then I taped some masking tape over the foil (beware of mirror images!). The I cut the masks. It's a bit fiddly with so many small windows on this scale, but this actually worked quite well.
It's a variation of Don's method: Youtube Video
 
23 August 2017, 07:09
Spanjaard
Thanks Martin
23 August 2017, 11:19
Ekki
Simply beautiful.
24 August 2017, 19:16
Martin Oostrom
Added a brownish wash. The wings picked up decently, the fuselage did some.
27 August 2017, 14:34
Martin Oostrom
She's ready. Only the base is left. But that needs a bit of drying time.
27 August 2017, 17:32
Martin Oostrom
Finished! For the final result, check here Bell X-1 in loading pit | Album by Mahoo76 (1:72)
27 August 2017, 19:08
Spanjaard
beautiful, congratulations
27 August 2017, 21:11
Martin Oostrom
Gracias Spanjaard
28 August 2017, 05:54
Łukasz Gliński
Very sad news, just read it on a different webpage 🙁
8 December 2020, 09:25
Spanjaard
sad news indeed.
8 December 2020, 09:29
Clifford Keesler
Looks very nice Martin.
8 December 2020, 23:04

Album info

Totally frustrated with my WIP Revell Supermarine Stranraer | Album by Mahoo76 (1:72) Stranraer build, I decided I wanted to do a quick build. This is it!

67 afbeeldingen
1:72
Voltooid
1:72 Bell X-1 (Tamiya 60740)No TERRAINS CONCRETE 250ML (AK Interactive AK 8014)
Bell XS-1
US US Air Force (1947-now)
Flight Test Div. 46-62 Glamorous Glennis (Cpt Charles Chuck Yeager)
Oktober 1947
FS12473
 

Alle albums

Bekijk alle albums »