Marco Preto
Ready for base painting, after a couple of days of construction.

Marco Preto
In order to assemble the Hamilton propellers with a consistent pitch in all blades, I've built a small jig out of plastic card and brass rod.

Cheers

mpminiatures.wordpress.com
Instagram: @marco_a_c_preto

Treehugger
Ah, yes I remember the bizarre arrestor hook solution for this kit. Otherwise, I had a fun time building mine. 🙂

Treehugger
Tip: I put some black cardboard paper inside the engines to block the visibility into them.

I also added sprue goo inside the air intakes for the two engines, and then I drilled out the holes.

Marco Preto
Thank you for the tips Tree hugger! I just painted the inside of the engines black and milled/filed the intakes/exhausts to improve their look. Indeed the arrestor hook is puzzling!

Cheers

mpminiatures.wordpress.com
Instagram: @marco_a_c_preto

Marco Preto
The resin propeller hubs are a bit to wide for the engine gondolas and though I tried to reduce their diameter, because their axle is a bit off center, it was not possible to achieve it easily. So I decided to turn my own parts out of brass rod.

Cheers

mpminiatures.wordpress.com
Instagram: @marco_a_c_preto

Bruce Huxtable
I'm very impressed with your skills and the results you are achieving 👍

Treehugger
Can you recommend your mini lathe machine? 🙂 Presumably, it is a mini version, but I don't know your model.

Marco Preto
Thank you for your kind comments. My mini-lathe is a Proxxon FD150e and it is the simplest of lathes (it just has a cross slide and a compound , so although it has 150mm between centers, you are limited to the length of the compound for the length of your parts. If I was sure that I could get spare parts for one of the many Chinese 7 inch mini-lathes, I would get one of those instead (the Proxxon pd250 was already outside my budget). So far I am happy with it (even with its limitations). For a complete novice like me, it is a great learning tool.
Cheers

mpminiatures.wordpress.com
Instagram: @marco_a_c_preto

Marco Preto
Decals applied (almost at least, I still miss the propeller ones). After painting a few more details, some subtle weathering will be added to complete this build.
Cheers

mpminiatures.wordpress.com
Instagram: @marco_a_c_preto

Christian Bruer
Sharp and clean work Marco. Looking forward to the final 👍

Spanjaard
looking good Marco.

Treehugger
Nice work on masking the nose anti glare field in black, goes to show it pays off being attentive and careful. 🙂

Marco Preto
Thank you for your supporting comments!

I've added a new album with photos of the completed model.

Cheers

mpminiatures.wordpress.com
Instagram: @marco_a_c_preto