A-6 "Intruder" , EA-6 "Prowler" wheels set

ResKit | No. RS32-0001 | 1:32

概要

メーカー:: ResKit
タイトル:: A-6 "Intruder" , EA-6 "Prowler" wheels set
品番:: RS32-0001
縮尺:: 1:32
タイプ:: 詳細セット
発売日:: 2020 新金型
バーコード:: 4589913295353 (EAN)
トピック:: Grumman A-6 Intruder » ジェット (航空機)

想定品

このセットの想定商品:

Trumpeter

2013

2014

新金型

新パーツ

市場

オンラインショップ

の代替 SKU ResKit RS32-0001:
32-0001 | RES-RS32-0001 | RESRS320001

注意: 価格と在庫状況はあくまで目安です。製品が実際に一致するかどうかも確認してください。

インボックスレビュー

外部レビュー

このキットに関するレビューはまだありません A-6 "Intruder" , EA-6 "Prowler" wheels set (#RS32-0001) から ResKit.

Jon Somerville
The holes for the wheels do not line up for the only kit in 1/32. My guess is that these are accurate to the real thing and not designed to fit the kit. So which do you prefer? I would have liked to see if fit the kit. Used drill bits to match a fitting hole to the original wheel parts and then drilled out the resin. The cut line to remove the casting block for the front wheels are correct, but not the mains.

All comments (10) » 1 19 April 2021, 15:43

Jon Somerville
I bought the MERs from ResKit. That was the one thing I was glad about that I waited so long before finishing the kit. Toyed with the idea of fixing the tail comb myself, but was going to be too much work for only a little gain.
Other issues with the kit is where the aft side of where the nose gear joins the fuselage is way to deep into the gear bay. The wing fences are not in the correct spot and the fuselage has way too many rivets. I filled the rivets where needed. If they ghost a bit, that's okay too.

19 December 2023, 13:44

Jon Somerville
Now that I re-read the last line in the review should really be "The cut line to remove the casting block for the front wheels hubs is correct, but not the mains." So referring to the hubs not the wheels themselves.

25 January, 17:38