makett adatbázis | polc kezelés
Reaper_lead
Reaper_lead

Qantas 737-800 VH-VXM

Hozzászólások

35 10 July 2022, 12:32
David R. Meizoso
Wow, that's an ambitious plan! Following!
10 July 2022, 13:41
Cuajete
Me 2!
10 July 2022, 17:25
Treehugger
Hmmm.. Maybe 3d printing for the chairs I am thinking, maybe 3d printing the entire cabin in one go could work, incl. the floor. 🙂
10 July 2022, 17:37
Łukasz Gliński
Me 4! I have to watch this, switched to 144th instead of being that brave 👍
10 July 2022, 18:11
Gary Kitchen
Following along 👍
10 July 2022, 18:14
Ben Marshall
Always great to see a big jet in 1:72. The gentleman's scale! Following with interest 😄
10 July 2022, 22:35
Reaper_lead
@treehugger the entire interior will definitely be 3d printed. I'm planning on buying a contour gauge so I can get everything as accurate as possible. The plan is to use side glow fiber along the windows and in the overhead spaces. Most of that wiring will be at the back where there are fewer exterior lights.
10 July 2022, 22:57
Reaper_lead
@ben Marshall. 1/72 is the ONLY scale. I'm personally excited for the BPK 1/72 Boeing 777-300ER
10 July 2022, 22:58
Dietmar Bogatzki
Following this ambitious projekt..
12 July 2022, 05:29
Oleg Bogolei
Following!
12 July 2022, 11:49
Finn
Will be really interesting to follow!
13 July 2022, 08:30
Gordon Sørensen
Watching! Looking forward to following your progress on this!
13 July 2022, 17:00
Reaper_lead
Prototype floor is ordered and should be here in 2 weeks. In the mean time, I will switch gears and try to start designing the seats. For anyone that wants to take a look around, i've made the file viewable using this link: tinkercad.com/things..S-jisxxsdFu3oAGZEBbo
13 July 2022, 18:08
Dietmar Bogatzki
What are you using for a CAD program, Reaper?
14 July 2022, 06:58
Erik De Smet
following to see how your 3d project works out. Did you find the seats on tinkercad ?
14 July 2022, 08:16
Reaper_lead
@Dietmar I'm using an online tool called Tinkercad. Rather than building polygons yourself, it provides some pre-built ones, so it's easier to use than traditional CAD software.
@Erik I "designed" those myself, just to get a general sense of the dimensions for the more detailed ones
14 July 2022, 13:22
Reaper_lead
Sooooo.... I just discovered United Airlines' Star Wars themed 737 N36272, and I don't think I can say no
5 August 2022, 21:20
Spanjaard
Wow, very interesting and ambitious, I will certainly take passage on this flight!
5 August 2022, 21:28
Andwil
Interesting project. Please note there is no u in Qantas.
6 August 2022, 05:30
Cuajete
Great, Reaper!

Sith...??
aws1.discourse-cdn.c..b8c48e4612bc635.jpeg

...Or Jedi??
[img1]
 


😛
6 August 2022, 09:39
Reaper_lead
@andwil, thanks for catching that. @cuajete what a silly question. Sith…ALWAYS 😉
6 August 2022, 13:49
Cuajete
I assumed 👍 😄
6 August 2022, 17:25
Cuajete
Looks big!
19 August 2022, 17:34
Cuajete
Good progress! 👍
27 August 2022, 11:51
Dietmar Bogatzki
for the first prototyp floor its good
27 August 2022, 16:49
Reaper_lead
Thank you! I'm pretty happy with how the floor fits. It's not pictured, but I ended up cutting the middle section into two pieces, since laying the floor on top of the main gear bay assembly meant the floor wouldn't be flat. I also did some prototyping with the engines, to see if I could fit a motor inside the nacelle. While I could fit a motor in there, it spun too fast, even at lower volatages. I could try a motor with a reduction gear box, but I don't think that would fit inside the engine nacelle, so I think the motor will not be spinning after all
27 August 2022, 17:29
Cuajete
Well done so far 👍
17 December 2022, 18:45
Skyhiker
Oh a big one... Cool!
17 December 2022, 19:14
Erik De Smet
Reaper, have you tried to put a resistance in the motor feed? It should slow down the motor ...
17 December 2022, 19:18
Reaper_lead
I tried adding resistors to the motor. I could only find motors that ran around 10-15,000 RPM, so by the time they were operating at less than 1,000, the motor didn't have enough torque to spin the blades.
17 December 2022, 21:24
Reaper_lead
I may keep looking, but this is already a bit of an ambitious project at this point
17 December 2022, 21:24
Erik De Smet
If it has to run that slow, you definitely need one with a reduction gear
18 December 2022, 09:51
Bernd Grün
Very ambitious project. Following with interest. 👍
19 December 2022, 08:36
Reaper_lead
A little update since this has been sitting for a bit. I am still waiting for V3 of the floor. I received the parts a few weeks ago, but they were massively incorrect, so I've had to work with customer support to get the items reprinted
28 January 2023, 01:00
Cuajete
👍
28 January 2023, 18:27
Dietmar Bogatzki
Fantastic work on the floor 👍
31 January 2023, 09:48

Project info

42 képek
1:72
Félrerakva
1:72 Boeing 737-800 (BPK 7218)
Boeing 737-800
AU Qantas (1920-now)
B738, VH-VXM 'Mount Hotham'
2018
White, Red
 

Összes album

Összes album megtekintése »