base de données du maquettisme | gestionnaire de stock
BigBill
William Joel (BigBill)
US

He111z - "Zwilling" (German for twin) from Hasegawa

Commentaires

19 6 June 2023, 19:12
William Joel
Diorama pics added at end of this album. Feedback welcome.
2 October 2023, 01:59
Villiers de Vos
Very nice work.
2 October 2023, 08:17
CaptGPF
Looks great!
2 October 2023, 15:15

Album info

A combination of two He111H-6 bombers. Proposed by Ernst Heinkel for use as a tow plane for the Me321 "Gigant" glide transport.
The He111z had a wingspan of 35.4m (116' 6" feet). This 5-engine plane could tow a single Me321 or up to three Go242 transport gliders. Optionally, the plane could carry up to four Hs293A missiles or be configured for reconnaissance and could carry four 300 liter (66 Imp Gal) drop tanks.

For my plane I chose to include the four drop tanks, but plan to use it inconjunct ion with my Me321 glider. See my album for details on that build.
The Hasegawa kit is excellent. I would recommend it for anyone interested in this unique German aircraft. The parts were clearly identified, minimal to zero flash, and the parts fit great. Very little putty was required. I would recommend building subassemblies prior to installation in the fuselage, to ensure a good fit.

The bear subassembly are the wheels struts as they are super thin, and care must be taken. For painting, I chose to temporarily install the wheel covers in the closed position. Also, to temporarily install the canopy and machine gun glazing so as not to break off the thin guns during painting. I use Micro Kristal Klear as it can be removed easily.

Assembly was completed using Tamiya Cement, both regular and Extra Thin. The painting was all Vallejo and camo mask was done using Tamiya tape along with Scott's Delicate Surface (#2080) tape for larger areas. The airbrush was a Master G22 (easy to use and clean), with the air compressor by Master too. The Putty was Deluxe Materials Perfect Plastic Putty. Decals were applied over a coat of Alclad II Lacquer with assistance from Micro Sol and Set, followed by a 2nd coat of Alclad for protection. Panel lines were applied using Tamiya Panel Line Accent Color via a cheap (Dollar store) fine point calligraphy pen, with clean up using mineral spirits. The final overall coat was Vallejo Matt Varnish.

When I purchased this kit, the individual had already obtained add-on detail items - Eduard Masks (CX271), Interior PE parts (73341) and Exterior (72512).
The masks worked great, but care when lifting off the backing must be taken to ensure they don't tear.

As for the PE parts, well this was my 2nd attempt with PE and for me it was a challenge. I only chose to use the parts that could be seen through the canopy. For those components that would be inside the fuselage, I chose to not spend my time on them. All PE parts were attached with white and/or super glue, as both dry clear.

Overall, a nice model even without extra details. This kit would be nice simply built as out of the box (OOB).

Added diorama pics at end of photos.

35 images
1:72
Terminé
1:72 Heinkel He111Z `Zwilling´ (Hasegawa 00995)

Tous les albums

Voir tous les albums »