WIP - SCUD
Typical Trumpy: 10 points where part was attached to sprue (8 in case of smaller part).
Step 1 & 2 from manual. It will be looong build.
Frame with transmission and engine.
Painted frame.
Painted engine and transmission parts.
Frame assembled, engine mounted.
Frame with engine, transmission and suspension.
Engine view.
Bumper with lights.
Rear of the frame.
Bottom view.
Right rear fender with equipment boxes.
And left side.
Engine radiator.
Base painted tires.
Wheel hubs black painted.
Middle section.
Rear part. Bumper with lights and support legs.
Another middle section...
... And additional parts to it.
Drivers cab in parts.
Passengers/operators cab.
Doors.
Missile mounting part with deflector.
Tires.
Dry fit of rims.
Missile support.
Preshading of equipment module.
Preshading of operators cab.
Painted ops cabin.
Painted equipment section.
With flash light but still color is not real.
Seats.
Assembling ops section.
Electronics.
Attaching equipment.
Dry fit of sections.
With missile.
Preshading.
Cabins painted.
Closer look.
Closer look.
Closer look.
Dry fit of assembled cabs.
White missile before preshading.
Missile support preshaded.
All the parts before color.
And painted.
Dry fit.
Dry fit.
SCUD vs SA-2.
Elements of road chapel. Sculpted by EurekaXXL, painted by me. Orthodox cross made by me from 2x4mm wood.
Dry fit.
Almost ready.
I've started to build the base.
I bought some grass mat...
...and tried to do some by ourselves.
Other version.
And using some of the mats I did a road.
Maybe something like this?
Mask removed added some dirt.
Added some pigments.
Final setup.
Front-top view.
Front view.
Commentaires
7 September 2016, 21:10
Przemek PrzybulewskiHi Bart. Well, that's becoming a problem as my stand with 6 shelves (60cm x 120cm) is full now.
It's very high so I will probably be able to rearrange it a little bit and fit 2 more shelves but I didn't expect that I will run out of space so quickly. 🙁
8 September 2016, 13:16
Michael HickeyGreat start, I like the look of the black chassis, engine & transmission with the silver dry brushing.👍
9 September 2016, 23:03
Przemek PrzybulewskiJames - thank you. Unfortunately I cannot compare it to the Dragon kit as I didn't build it. I had it in my stash but as soon as Trumpeter announced release of his SCUD, I sold my Dragon's kit. But gor sure frame, engine, transmission ans suspension are detaily represented in Trumpy's kit.
Thank you Michael.
17 September 2016, 06:18
Mohammad AdlHi Przemek, Really great stuff. Like your works very much! All of them, 👍
1 October 2016, 03:45
Przemek PrzybulewskiIngo - thank you.
Mohammad - thank you too. It is very nice to read comments like yours. 🙂
1 October 2016, 20:21
Lex JassiesLooks mighty impressive. Curious to see the end result. By the way, you have a very nice and organized man cave 🙂
1 October 2016, 20:58
Przemek PrzybulewskiThank Lex. It took me few years to design and build my man cave. And it is still not ready. 😉
3 October 2016, 15:02
Przemek PrzybulewskiGlen - Thank you.
Evgeny - Thank you very much.
Mohammad - I will try to do some more pictures during my work. Are you interested in any particular step or just overall?
10 October 2016, 11:37
Przemek PrzybulewskiThank you very much James. Oh, you are too kind and I am pretty sure that everyone can paint like this. It is not so difficult.
10 October 2016, 19:03
Mohammad AdlThanks Przemek, Generally i am interested to build diorama. Especially makeing the plants water asphalt on base. 👍
11 October 2016, 05:04
Przemek PrzybulewskiOk. I will try to make as many pictures as possible. I will add captions while posting them but in case of questions feel free to contact me.
11 October 2016, 06:03
Lex JassiesPromising start with the base. I'm shure it will be become a beautiful diorama.
11 October 2016, 06:43
Bryn CrandellQuite impressive. The simple process of pre-assembly and painting makes sense. I'm going to make note of that and add to my tool box. Can't wait to see finished build.
11 October 2016, 11:34
Przemek PrzybulewskiThank you very much Lex.
Thank you Bryn. I'm glad that my ideas and way of building and painting is useful to someone. 😉
12 October 2016, 10:18
Scott DuttonGreat effort in both the model building and the photography you have done in order to share. Makes it almost like a FAQ on how to build and how to pre shade and is a very useful tutorial. The result you have got is spectacular, you are a very organised and patient man, I'm looking forward to final outcome. Many thanks for sharing
30 October 2016, 20:29
Przemek PrzybulewskiThank you very much Scott. For a couple of years I tried different techniques of painting just to find my own way. It's a combination of few methods which in my opinion are giving pretty good results without taking too much time.
31 October 2016, 06:29
Przemek PrzybulewskiScott - thats true. I have around 110 models in my stash and even if I was able to build a lot of this year the stash is still growing.
Gorgygould - Thank you.
16 November 2016, 19:39
Lex JassiesAnd it has become a beautiful diorama!! A figure for scale comparison would be a nice touch?
17 November 2016, 18:54
Scott DuttonThat has finished off beautifully, agree with Lex a figure would way be great, I especially like the little nice touch of an Orthodox Cross, sets the location in a general and subtle, perhaps a priest or even a child chatting to driver. Also very much like your interiors, cabin and firing compartment. Congrats
17 November 2016, 20:52
Przemek PrzybulewskiLex - I completely agree, but there is one small issue. I do not know how to paint figures. I did some in the past but they didn't look too good.
Thank you Scott. I did my own cross and replaced the one from the kit. Original one was much smaller and thin.
18 November 2016, 12:27
Album info
Photos of build in progress of SCUD.
