WIP - Terminator
Started with link tracks. Easy build. Just snap few parts.
Then wheels. Trying to figure out what colors of Tamiya paints will be the best for Expo'13 camo scheme.
And the hull. Looking quite odd. So small.
Suspension positioning with smart jig.
Looking good. All bars at the same level.
As camo will be from Expo, then base have to be from expo as well. I made simple jig to cut circleson table saw.
Some HDF and MDF for circles.
First elements are ready.
And base almost ready.
Hull is ready.
I will attach side fenders after paining wheels and hull lower parts.
Working on turret. Looks also so small.
Messing with paint 😉
Wheels ready.
Black Eagle? No - turretless BMPT.
OK. Now better.
Some more white.
And ready. Maybe I'll leave like this.,
Finally I get the turned containers for missiles.
Ther is 8 main parts, 4 resin, additional 8 small turned parts, 12 PE parts, some decals and instruction.
Preshaded base.
Camo ready.
Camparing with PLZ05.
Dry fit.
Rear view.
Other side.
Added some white to the base.
Then some greys nad various pigments.
Dry fit of mine clearing system.
If display then we need some info about the vehicle.
I did some ropes from leftovers for the barriers.
And barriers from toothpick and some balsa.
Then some pigments for the crowd area.
Glued mine plow, slat armour in the rear.
I did some wash/filter to enhance colors.
And some drybrush.
Commentaires
7 8 March 2016, 10:45
Przemek Przybulewski
Hi James. Thank you.
That's true that Meng kits are expensive but in my opinion totally worth it. 😉
Hi James. Thank you.
That's true that Meng kits are expensive but in my opinion totally worth it. 😉
9 March 2016, 16:10
Przemek Przybulewski
I understand. That a good aproach to get some experience before starting more complicated models. Meng models are very good but have myriad of small parts and it is sometime intimidiating but in most cases there is nothing to worry about. I'm sure you will handle this T-90 of yours.
I understand. That a good aproach to get some experience before starting more complicated models. Meng models are very good but have myriad of small parts and it is sometime intimidiating but in most cases there is nothing to worry about. I'm sure you will handle this T-90 of yours.
10 March 2016, 09:19
Przemek Przybulewski
Bart - Most likely I will go for Russia Expo Arms 2013: [img1]
Bart - Most likely I will go for Russia Expo Arms 2013: [img1]
10 March 2016, 10:44
Aghis Barberopoulos
I just got mine! Interested to see your work on this little monster.
I just got mine! Interested to see your work on this little monster.
16 March 2016, 16:56
Henry Milton
I built the T90A from Meng awhile back and it was a dream. The fit and detail are beyond belief and even though there are many parts it was an easy build. If this kit is similar you have a real winner.
I built the T90A from Meng awhile back and it was a dream. The fit and detail are beyond belief and even though there are many parts it was an easy build. If this kit is similar you have a real winner.
24 March 2016, 11:48
Przemek Przybulewski
Henry - Thank you. I have T-90A but it sits in the box and waits for its turn. Hovewer I'm thinking if not to try to exchange it for the version with dozer (this version has a smal LEDs for Shtora).
Melf - Thank you very much.
Christian - Big thanks.
Henry - Thank you. I have T-90A but it sits in the box and waits for its turn. Hovewer I'm thinking if not to try to exchange it for the version with dozer (this version has a smal LEDs for Shtora).
Melf - Thank you very much.
Christian - Big thanks.
24 March 2016, 12:43
Przemek Przybulewski
Thank you Holder. Quite easy build. Paint was more challenging. But overall even I was suprised that it almost the end. 😉
Thank you Holder. Quite easy build. Paint was more challenging. But overall even I was suprised that it almost the end. 😉
24 March 2016, 13:58
Bart Goesaert
nice camouflage so far, and didn't know about the upgrade for the rocket tubes... so there goes my Easter money...
nice camouflage so far, and didn't know about the upgrade for the rocket tubes... so there goes my Easter money...
25 March 2016, 08:00
Przemek Przybulewski
James - Thank you very much. As for my knowledge this camo was used only on Russia Arms Expo. Not only on this vehicle but only once.
Bart - Thank you. I found those tubes by accident. I was looking for something else in one of the online hobby shops that was going out of the business (they had a nice discounts) and since the price was attractive I ordered them.
It costs around 90PLN / 23USD so it was not so bad.
James - Thank you very much. As for my knowledge this camo was used only on Russia Arms Expo. Not only on this vehicle but only once.
Bart - Thank you. I found those tubes by accident. I was looking for something else in one of the online hobby shops that was going out of the business (they had a nice discounts) and since the price was attractive I ordered them.
It costs around 90PLN / 23USD so it was not so bad.
25 March 2016, 08:28
Henry Milton
I did the dozer version. I posted some shots in my album section. I did that as a review fir the AMPs website.
I did the dozer version. I posted some shots in my album section. I did that as a review fir the AMPs website.
25 March 2016, 14:28
Przemek Przybulewski
Christian - thank you.
Henry - Thank for the info. I think I will go for the dozer as well.
Rui - Thank you very much.
Christian - thank you.
Henry - Thank for the info. I think I will go for the dozer as well.
Rui - Thank you very much.
25 March 2016, 20:08
Christian Bruer
Excellent work on the display stand so far. I much like the barrier - very well done 👍
Excellent work on the display stand so far. I much like the barrier - very well done 👍
26 March 2016, 08:16
Aghis Barberopoulos
I am thinking of applying the same camo on mine, it looks very good on yours. The only other thing I can say about this kit is that it has amazed me with its details, quality and fit. The tracks are so good and easy to assemble and no glue is required! I do not understand why some reviewers made negative comments about them. I would not change them for any after market deal. The kit is definitely worth its price, as it can be built straight OOB.
I am thinking of applying the same camo on mine, it looks very good on yours. The only other thing I can say about this kit is that it has amazed me with its details, quality and fit. The tracks are so good and easy to assemble and no glue is required! I do not understand why some reviewers made negative comments about them. I would not change them for any after market deal. The kit is definitely worth its price, as it can be built straight OOB.
27 March 2016, 13:17
Przemek Przybulewski
Thank you Christian. I spend few hours to build barriers so it is good that you like it.
Aghis - from three different camos in manual, that one is most attractive in my opinion. It was not easy to paint (a lot of angles and sharp edges).
As for the tracks - it was like a baby walk - a lot of parts but very easy build and effect is great. In the PLZ05 from Meng tracks are not so good.
Right know for me Meng is one of the best model companies in the world for its subject selection and quality. Multiple options, quality of molds and parts fully justificate higher price. In this kit the one thing I didn't really liked was the towing cable - it was just a piece of string - thats why I used great Eureka cable.
Thank you Christian. I spend few hours to build barriers so it is good that you like it.
Aghis - from three different camos in manual, that one is most attractive in my opinion. It was not easy to paint (a lot of angles and sharp edges).
As for the tracks - it was like a baby walk - a lot of parts but very easy build and effect is great. In the PLZ05 from Meng tracks are not so good.
Right know for me Meng is one of the best model companies in the world for its subject selection and quality. Multiple options, quality of molds and parts fully justificate higher price. In this kit the one thing I didn't really liked was the towing cable - it was just a piece of string - thats why I used great Eureka cable.
28 March 2016, 07:48