Logo
modellbau datenbank | stash-manager
Mithran’dir
JD (Mithran’dir)
US

U.S.S. Defiant NX-74205

Kommentare

12 26 October 2021, 18:43
JD
The adventure begins..
30 October 2021, 20:28
Torsten
I will follow your journey with great interest 🙂
31 October 2021, 07:07
JD
Welcome Torsten. The worst part of a snap kit is the snaps themselves. Meant to be permanent, once you snap them together, good luck getting them apart, and you have little control over the seams. I want avoid this pitfall by drilling out the posts, which are hexagonal, and now the fit is great. The best seams I have seen on a Polar Lights kit. I can now move on to figuring out where to mount various leds, and see where the light blocking will be needed. The major major flaw is the front nacelle bulkhead should have been made clear for lighting, so I will attempt to mold and cast these parts in uv resin..
31 October 2021, 20:13
JD
Captain's log: Stardate 99444.16 Nothing much to report, some progress indicated, that is all. Starfleet out.
5 November 2021, 10:18
Torsten
And there was light 👍
5 November 2021, 19:13
Nathan Dempsey
I'm watching too 🙂
6 November 2021, 22:36
JD
Hi there!😁 I finally got around to building and testing the nacelle with my tinted lens idea. I'm liking the results
12 November 2021, 05:57
Robin (WhiteGlint)
👀
12 November 2021, 11:15
Torsten
It looks great 😎
12 November 2021, 13:21
Starbase101
I see this kit suffers the same as the larger version, having a locator pin behind the lit area and casting a shadow onto the clear part. If you move the LED more towards the ship body (angle it towards the clear part) and also put a mirrored reflector in front of the locator pin you can eliminate the shadow it creates.
12 November 2021, 14:55
JD
Port nacelle assembly completed.
Interesting solution Starbase101 🤔
I think I might be ok if I can cut out the locator pins, as they aren't necessary anymore.
14 November 2021, 04:28
JD
Not much time on the bench lately, but made some progress. I was able to remove the locator pins in the forward sensor array, and redesigned a better parallel circuit. The blue light is a little weak reaching the plasma vents..
20 November 2021, 19:44
JD
Configuration #2 gave better results, though the light is still uneven. I have ordered 3mm side glowing optical fiber to play with
20 November 2021, 21:51
Starbase101
For the plasma vents try blue LED strip tape, double density. You can scratchbuild a "box" underneath each row of vents for mounting the light strips and keeping blue light from spilling out to other areas.
21 November 2021, 01:19
jan zumack
Crazy man... 👍
5 December 2021, 15:42
Torsten
The blue light looks good 😎
7 December 2021, 04:01
JD
Thanks Gents. After much experimenting, I have come up with an arrangement that I think will work. Soon on to light blocking and further testing before final assembly. Then I can get started painting and decals. I've also ordered slow flashing leds for the navigational beacons.
7 December 2021, 19:54
Torsten
That with the light is already very 😎, maybe I must also think about how I can use something like that with me
15 January 2022, 08:10
JD
Thanks Torsten! I hope you do 😉 I finally figured out how to light the plasma vents! It only took me a month.. 🤨
15 January 2022, 08:31
Spanjaard
looking very nice. looking forward the final result
20 January 2022, 10:20
JD
Thanks Spanjaard! A little more progress installing the plasma conduits..
22 January 2022, 21:32

Project info

70 Bilder
1:1000
In Wartestellung
1:1000 U.S.S. Defiant NX-74205 (Polar Lights 952)

Alle Alben

Alle Alben anzeigen »