Iron Maiden Aces High Stageversion

1
December 22, 2019
Maybe I'll buy me some PE-Parts next year
2
December 22, 2019
Eddie taking seat for the first time. Left arm follows when I finish the cockpit.
3
December 22, 2019
The figure needed a few putty.
4
December 22, 2019
Revell should have produced this in clear plastics. So I used a drill and a knife to scoop out the glasses. After painting the frame i'll fill it with Humbrol Clearfix.
5
December 22, 2019
Starting with the seat.
6
December 22, 2019
I glued the parts F8 and F9 on the wrong sides, so I used Haulers PE-Saws to cut them off.
7
December 22, 2019
If you don't use too much glue, the barrs stay moveable.
8
December 22, 2019
9
December 22, 2019
I use a small wire to keep the cannula clean. Bending it and the cap fits nice.
10
December 25, 2019
Had to make a notch into the yahu-panel to glue the vizor.
11
December 25, 2019
No problems with building the engine.
12
December 25, 2019
13
December 25, 2019
testfiting of the fuselage and wings.
14
December 25, 2019
Just a little gap at the tail. Also no prob.
15
January 8, 2020
Today I started to paint Eddie
16
January 8, 2020
I also worked on the Cockpit
17
January 8, 2020
At this size the seat looks much worse than in reality. Macro bad 🙁
18
April 14, 2020
The sides of the Cockpit.
19
April 14, 2020
20
April 14, 2020
Testfitting - nice
21
April 14, 2020
What you can see...
22
April 14, 2020
23
April 14, 2020
Eddie is a big man, with big boots.
24
April 14, 2020
Testfitting, looks good.
25
April 14, 2020
26
April 14, 2020
I finished the Figure.
27
April 14, 2020
28
April 14, 2020
I had to cut off the pedals and needed to the reduce the size of his boots from 48 to 34.
29
April 14, 2020
Eddie isn't Eric Brown, so his arms are too long for the small Cockpit.
30
April 14, 2020
I just don't close the cockpit. 😉
31
April 14, 2020
I made a Hood from paper and tesaband to close the cockpit with Eddie inside. One moore time filling the gaps with putty and I can start the paintjob.
32
May 25, 2020
After using putty from Vallejo I sprayed a layer of Tamiya Flat Alu. Looks good to me.
33
May 25, 2020
Where wings and fuselage meet... I had to use putty and a lot of sanding, now the rivets are gone 🙁
34
May 25, 2020
As I want to build the Stageversion I needed a 4-blade-prop. Revells Abteilung X was very kind 🙂
Just some putty on 2 of 4
35
May 25, 2020
I painted the panellines with Mr.Hobby Nr 81.
Took a long time just for this side and there's still the upper side.
36
May 25, 2020
The landing gear oob. But I want to show the Spit in flying condition.
37
May 25, 2020
Doesn't fit, of course...
38
May 25, 2020
That's all I need + the tire.
39
May 25, 2020
and some milliput
40
May 25, 2020
Now it looks like this.
41
January 28, 2021
Long time, no see...
Doesn't look like much, but took me a really long time.
42
February 1, 2021
Looks ok for me. Only the underside of the cowling needs another thin layer of Vallejo 71302 Sky type S.
43
February 6, 2021
I don't know what it is.
The Dark Green from Vallejo mixed with original thinner. After a few minutes it looks like this?
44
February 6, 2021
Spraying the Dark Green.
First it looks like Yellow. I need so much layers to make it look like Dark Green, so the preshading is gone... 🙁
45
February 6, 2021
I decided to remove the color on the upper site using spiritus.
It also went on the belly secured with Tese Sensitiv.
46
February 6, 2021
The Tamiya tape I used to secure the tail and the belt around the fuselage ripped off the clor too.
What a nice Day...
47
February 6, 2021
I feared, that the spiritus also attacked Eddie.
But he is safe.
And angry!
Time to kill some zombies for the rest of the weekend...
48
March 7, 2021
Made Masks from paper and fixed them with UHU Patafix.
49
March 7, 2021
Painted the dark green from Vallejo
50
March 7, 2021
Also on the sides.
Didn't make pics from painting the dark earth.
51
March 7, 2021
UHU Patafix changed the green colour. It made it lighter and shinier 🙁
52
September 3, 2021
53
September 3, 2021
54
September 3, 2021
55
September 3, 2021
56
September 3, 2021
57
September 3, 2021
58
September 3, 2021
59
September 3, 2021
60
September 3, 2021
61
September 3, 2021
62
September 3, 2021

Kommentare

6 22 December 2019, 22:53

Munkyslut
Watching😉

22 December 2019, 22:56

Christoph Kunz
Happy Christmas mates and welcome Munkyslut.

Today I got up pretty early to search the net for some blingbling for my Spitfire.
But after a while I found it would be more fun to build this kit ooB.
Just the Kit, the glue and me 🙂 and the stabilizers from Quickboost of course.

25 December 2019, 18:47

Christoph Kunz
Hey Roland, zwei Dumme ein Gedanke 🙂

2 January 2020, 18:30

Christoph Kunz
Ordered a Rosie today, let's see when she shows up for work 🙂

25 May 2020, 20:26

Christoph Kunz
Thank you, Roland

1 February 2021, 18:39

Christoph Kunz
No fine day today...

6 February 2021, 12:38

Christoph Kunz
Some progress...
Fixed the marks UHU Patafix left. Pics of the current status later, it's to dark now.
Up the Irons
Christoph

7 March 2021, 20:27

Christoph Kunz
Pictures of the finished model.