Meteor Shower (Part 1)
![Album image #1 Album image #1](/albums/img/0/9/9/1502099-22187-38-720.jpg)
Box art
![Album image #2 Album image #2](/albums/img/4/3/1/1503431-22187-10-720.jpg)
Bit of a rinse as usual, not sure if it's even needed nowadays, more habit than anything else.
![Album image #3 Album image #3](/albums/img/4/3/2/1503432-22187-56-720.jpg)
Dry brushed the interior of the tub to bring some detail out on the off-chance you'll be able to see it at the end.
![Album image #4 Album image #4](/albums/img/9/1/6/1503916-22187-36-720.jpg)
Blast from the past: don't have and couldn't find the acrylic version of 109 WWI Blue, so dug out my enamel, just like when I was a kid 🙂
(And figured sod it, might as well use the metalcotes too)
(And figured sod it, might as well use the metalcotes too)
![Album image #5 Album image #5](/albums/img/6/7/0/1504670-22187-42-720.jpg)
This is my 1:48 bang-seat, complete with arm rests...
![Album image #6 Album image #6](/albums/img/6/7/2/1504672-22187-79-720.jpg)
... but no, despite being the sturdy 1:48 one, between removing the spine part of the chair from the sprue and then looking at it again 5 seconds later, I'd managed to lose an arm!
Bodged one with a bit of offcut sprue.
Bodged one with a bit of offcut sprue.
![Album image #7 Album image #7](/albums/img/6/7/1/1504671-22187-53-720.jpg)
My thinking is, from outside of the cockpit tub once assembled, it'll look fine. Disaster averted.
Still love to know how I managed to knock that bit off!
Still love to know how I managed to knock that bit off!
![Album image #8 Album image #8](/albums/img/6/6/3/1504663-22187-47-720.jpg)
Nearly time to assemble the tub.
![Album image #9 Album image #9](/albums/img/7/1/0/1505710-22187-15-720.jpg)
Very satisfying click as the seat went in.
![Album image #10 Album image #10](/albums/img/2/0/1/1508201-22187-12-720.jpg)
Decided to try and be clever, attaching the gun covers with magnets (hopefully). Nearly came a cropper by forgetting an ancient Confucian wisdom*.
* Don't f*** about with Superglue and magnets ?
* Don't f*** about with Superglue and magnets ?
![Album image #11 Album image #11](/albums/img/2/0/2/1508202-22187-75-720.jpg)
Those cross beams went into position beautifully. Have to say, this is a bloody clever and well designed kit, and a pleasure to build.
![Album image #12 Album image #12](/albums/img/4/9/8/1508498-22187-17-720.jpg)
Showing off the metal work before it all gets sealed up. The exhaust pipes also snapped in with a comforting "click".
![Album image #13 Album image #13](/albums/img/5/0/0/1508500-22187-88-720.jpg)
It's pegging time!
![Album image #14 Album image #14](/albums/img/4/9/9/1508499-22187-11-720.jpg)
Not wishing to cast aspersions on Airfix's calculations but I'm going 5g more than they've recommended, I don't want a tail-sitter doing wheelies.
Of course, iron weights and the aforementioned neodymium magnets have already been arguing as I did a dry fit... sigh.
Of course, iron weights and the aforementioned neodymium magnets have already been arguing as I did a dry fit... sigh.
![Album image #15 Album image #15](/albums/img/1/8/2/1509182-22187-26-720.jpg)
Weighted cockpit tub fitted - another satisfying and reassuring click as it went in.
![Album image #16 Album image #16](/albums/img/1/8/3/1509183-22187-29-720.jpg)
Fuselage sealed up.
![Album image #17 Album image #17](/albums/img/7/2/4/1509724-22187-96-720.jpg)
That snapped together nicely. Gap between wing top surfaces and fuselage is a bit bigger than I'd like/expect, but not sure if filler would actually make more of a mess!
![Album image #18 Album image #18](/albums/img/6/0/2/1510602-22187-61-720.jpg)
Looking a bit more plane shaped
![Album image #19 Album image #19](/albums/img/6/0/1/1510601-22187-33-720.jpg)
Distinct lack of engines for now, this is where the Big One and Little One will have to part company for a bit.
![Album image #20 Album image #20](/albums/img/6/0/3/1510603-22187-79-720.jpg)
Flying in formation, Little One doing a good impression of being further away.
Big One doing very well considering it has no engines.
Big One doing very well considering it has no engines.
![Album image #21 Album image #21](/albums/img/1/7/8/1512178-22187-78-720.jpg)
Two Rolls-Royce RB.37 Derwent engines, some assembly required.
![Album image #22 Album image #22](/albums/img/8/2/3/1512823-22187-94-720.jpg)
Two Rolls-Royce RB.37 Derwent engines - think they've come out quite nicely. So many different metal finishes in there, adds a lot of texture and interest. Citadel washes impressing me too.
![Album image #23 Album image #23](/albums/img/5/9/5/1514595-22187-28-720.jpg)
One Derwent in the nacelle..
![Album image #24 Album image #24](/albums/img/5/9/3/1514593-22187-78-720.jpg)
... other Derwent on a trolley. Think I'm going to streak that trolley a bit (grime/oil/rust) as it's looking a bit too clean.
![Album image #25 Album image #25](/albums/img/5/9/6/1514596-22187-22-720.jpg)
Another view of Derwent-to-go
![Album image #26 Album image #26](/albums/img/5/9/7/1514597-22187-89-720.jpg)
Last one, honest.
![Album image #27 Album image #27](/albums/img/5/9/4/1514594-22187-22-720.jpg)
Cameras and the complicated nose wheel / camera mount thingy. Bit worried about how strong it is, given all the weight I packed in on the other side of that bulkhead!
![Album image #28 Album image #28](/albums/img/8/7/5/1522875-22187-70-720.jpg)
As Sun Tzu never said, precut masks never survive first contact with the model... but I'm at least consistent across the two!
It occurred to me as I masked these two that I'm building a scale model of a scale model 🙂 ... which is a two-edged sword as they each help explain some fits and positions on each other, but I also want to get them as similar as possible.
It occurred to me as I masked these two that I'm building a scale model of a scale model 🙂 ... which is a two-edged sword as they each help explain some fits and positions on each other, but I also want to get them as similar as possible.
![Album image #29 Album image #29](/albums/img/8/7/6/1522876-22187-40-720.jpg)
First coat of Humbrol 163 green on... oh, and in the process of wrestling with the masks I've, ah, "disassembled" two legs of undercarriage
![Album image #30 Album image #30](/albums/img/0/6/4/1536064-22187-58-720.jpg)
Slight disagreement between 1:48 & 1:72 - ground crew will be confused!
![Album image #31 Album image #31](/albums/img/0/6/8/1536068-22187-71-720.jpg)
Underside started (stencils still to go)
![Album image #32 Album image #32](/albums/img/0/6/7/1536067-22187-82-720.jpg)
Post side decals and dozens of tiny stencils on.
![Album image #33 Album image #33](/albums/img/9/8/8/1541988-22187-46-720.jpg)
Meteor all done! Very happy with the shiny canopy.
![Album image #34 Album image #34](/albums/img/9/8/7/1541987-22187-83-720.jpg)
Peek-a-boo starboard Derwent...
![Album image #35 Album image #35](/albums/img/9/8/6/1541986-22187-27-720.jpg)
... there it is.
![Album image #36 Album image #36](/albums/img/9/8/9/1541989-22187-21-720.jpg)
Peek-a-boo starboard Hispano Mk V cannon...
![Album image #37 Album image #37](/albums/img/9/9/0/1541990-22187-93-720.jpg)
... there they are!
![Album image #38 Album image #38](/albums/img/9/9/1/1541991-22187-40-720.jpg)
Spot the camera in the window.
![Album image #39 Album image #39](/albums/img/9/9/2/1541992-22187-91-720.jpg)
Loving the aluminium effect inside the wheel wells even if I do say so myself.
![Album image #40 Album image #40](/albums/img/9/9/4/1541994-22187-43-720.jpg)
Family photo with little brother.
![Album image #41 Album image #41](/albums/img/9/9/3/1541993-22187-48-720.jpg)
Home at last, in display case.
Kommentare
10 2 July 2023, 16:33