modellbau datenbank | stash-manager
chrispisme
Chris Parsons (chrispisme)
CA

Photo Album

Album image #1
Album image #2
Album image #3
Album image #4
Album image #5
Album image #6
Album image #7
beginning work on the main gear bays  
 

Album image #8
.020" solder and wire to simulate piping  
 

Album image #9
about 1/2 done... 
 

Album image #10
some placards added 
 

Album image #11
Album image #12
nose gear bay as furnished in the kit 
 

Album image #13
added a bunch of clutter 
 

Album image #14
Album image #15
Album image #16
these bumps have to be removed for a CF 18 A 
 

Album image #17
Album image #18
One bump removed completely but sink marks showed up 
 

Album image #19
CA'd sink marks 
 

Album image #20
gloss white latex paint poured into the pipes and left to set 
 

Album image #21
sanded through the back of the plastic to make the vents see through 
 

Album image #22
hollowed out the gun vents 
 

Album image #23
fitting out parts for forward fuselage 
 

Album image #24
wings attached to upper half 
 

Album image #25
not following instructions, attaching side panels to lower half to avoid those fit issues in this area 
 

Album image #26
Album image #27
the one issue, a mismatch of my own doing, fixed with a shim of .010 sheet 
 

Album image #28
Some of the Vallejo colors being used for the gray's 
 

Album image #29
Bottom, light gray on 
 

Album image #30
Top medium gray 
 

Album image #31
Album image #32
Tamiya orange and yellow (custom mixed) 
 

Album image #33
I cut out paper scans of the decals and used them as stencils (wet to stick them in place) then shot paint right over the paper 
 

Album image #34
painting in progress 
 

Album image #35
masks removed, touch needed but not too bad 
 

Album image #36
Album image #37
this bug has blue eyes 
 

Album image #38
most (except the inevitable touch up) painting is done, back to construction for a while 
 

Album image #39
Album image #40
Album image #41
Album image #42
Album image #43
decal work finally begins  
 

Album image #44
Album image #45
fitted the intakes and landing gear...finally 
 

Album image #46
masking for alclad on the pipes 
 

Album image #47
Album image #48
Album image #49
Finally adding the aircraft shaped bits 
 

Album image #50
flaps on with decals added  
 

Album image #51
Album image #52
Album image #53
Album image #54
Album image #55
Album image #56
Album image #57
Album image #58
Album image #59
Album image #60
I goofed, I forgot to paint the gunship gray on the ailerons, all fixed now but kinda hairy masking and painting over decals 
 

Album image #61

Kommentare

1 February 2019, 02:52
Nathan Dempsey
Nice! Love the markings.
1 February 2019, 03:10
Chris Parsons
Thanks Nathan
I forgot to add...Black box "A" cockpit and tail for the conversion, Eduard photo-etch, some Lion Roar bits n pieces, Leading Edge decals for the 20 years Hornets colour bird version and whiskey to work up the nerve...
1 February 2019, 03:20
Patrick Hagelstein
Whiskey is my favorite tool as well...
1 February 2019, 04:12
Konrad -
Looks nice 👍! I watching too...
ähhmm and cheers 😉.
1 February 2019, 17:35
Chris Parsons
Thanks for looking in on me!
2 February 2019, 21:01
Konrad -
Impressive detailing mate 👍!
Great Job!!
3 February 2019, 18:57
Chris Parsons
thank you very much...tough on the old eyeballs
3 February 2019, 18:57
Konrad -
LOL!
Yeah but it's worth 👍
3 February 2019, 18:58
Logan Eden
Good Morning, Chris Just love the added detail, and this looks like it's coming along great. Is there a covert group in SMAS that has been taking over the club with CF-18's???? This makes four that are building them....group build??? Catch Ya, Logan
10 February 2019, 14:18
Patrick Hagelstein
I see you really needed that whiskey: amazing job in those details! 👍
10 February 2019, 18:04
Chris Parsons
Hi Logan! Sorry but I've dropped out of the club, I haven't been keeping up with them at all. This was a project to help get me through winter...I thought it would take longer.
Patrick, yup! I've gone through a bit of whiskey on the detailing...the decals are frankly scaring the bijeebers outa me so I'm going to try masking and painting some of the art on it...hold my drink and watch this! Hahaha
10 February 2019, 23:41
Patrick Hagelstein
😄 I will! I could need a nice one while getting into my WTD 61 F-4F.
11 February 2019, 02:04
Ronny Verlaek
Pfoeeee , thats a really nice build so far , i'm taking a seat and i will follow this untill the END ... 😉 Keep Up This Good work ... Thumbs Up ..
11 February 2019, 02:56
Chris Parsons
Thanks a lot you guys!
Painting under way now, the orange and yellow rear is masked and sprayed and I'll get some pics up soon...
13 February 2019, 14:42
Konrad -
The colours are amazing Chris! Very nice paintjob so far!!
17 February 2019, 07:51
Gordon Sørensen
Great looking paint so far, Chris!
17 February 2019, 14:29
Patrick Hagelstein
Nice and vibrant! 👍
17 February 2019, 17:22
Chris Parsons
Thanks guys! A looooooot of masking, unmasking whoopsing, remasking repainting and unmasking again.
Hopefully able to post some pictures of the fuselage in it's finished color application soon...maybe...
17 February 2019, 21:32
Konrad -
Cant wait mate cant wait 😉
17 February 2019, 21:51
bughunter
Wow, superb paint job 👍
17 February 2019, 22:44
Chris Parsons
Thank you for the kind words and encouragement, the masking takes a lot of time and tape!..you should be buying Tamiya masking tape stocks right now!
19 February 2019, 00:04
Clifford Keesler
Looking great.
19 February 2019, 00:18
Nathan Dempsey
I agree, this is looking great. I will never complain about having to do a few straight lines again!
20 February 2019, 04:06
Holger Kranich
Awesome Chris! Fantastic detailing in the gear bays. A feast for the eyes!
20 February 2019, 08:08
Chris Parsons
Thanks for looking and encouraging mates! It's a great kit to build as well. Although, doing a demo plane, I'll now have an armload of spare pylons tanks and weapons.
20 February 2019, 17:59
bughunter
Wow! Mind blowing paint job 👍
3 March 2019, 08:22
Chris Parsons
Thank you very much sir!
3 March 2019, 15:35
Chris Parsons
Calling this one done...off to buzz my wife then park it on the shelf
3 March 2019, 20:29
Nathan Dempsey
Wonderful result. Came out great!
3 March 2019, 20:56
Chris Parsons
Thanks a lot
3 March 2019, 22:24
Clifford Keesler
Excellent result.
3 March 2019, 23:05
Chris Parsons
Thanks Clifford
4 March 2019, 00:15
Donald Dickson II
Wow! Excellent! I did this kit as well. Blue Diamond F-18 | Album by smokeriderdon (1:32)
4 March 2019, 00:32
Ronny Verlaek
Nice one Chris ... Great Work .. 😉
4 March 2019, 01:19
Rui S
Impressive work &. Beautifuly clean Paint job. 👍
4 March 2019, 01:45
Gordon Sørensen
Great looking Hornet, Chris!
4 March 2019, 02:11
Chris Greathouse
That is one sexy bird! Great paint job!
4 March 2019, 04:59
Jos Jansen
Nice clean build, and man what a fantastic paint job..👍!
4 March 2019, 08:13
Zsolt Czegle
Awesome work! 👍
4 March 2019, 08:33
Spanjaard
Colorful indeed 🙂 nice job!
4 March 2019, 13:22
Holger Kranich
Awesome, just awesome! And now you have a stack full of ordinance to Play with!😉
4 March 2019, 13:24
Jan Raska
Incredible!
4 March 2019, 15:10
Konrad -
Speechless! Awesome work 👍
4 March 2019, 16:20
Patrick Hagelstein
Wow! 😮
4 March 2019, 17:02
Chris Parsons
Hey thanks you guys! A great bunch here!!
4 March 2019, 19:20

Album info

pics as I go.

61 Bilder
1:32
Fertiggestellt
1:32 F/A-18C Hornet (Academy 2191)1:32 CF-18 Hornet Resin Tails (In Service) (Canuck Model Products WVP32002)

Alle Alben

Alle Alben anzeigen »