modellbau datenbank | stash-manager
alanrush
Alan Rush (alanrush)
CA

SCM Groupbuild-Naval Aviation

Kommentare

30 January 2014, 22:49
Clifford Keesler
Nice choice.
31 January 2014, 02:27
Alan Rush
I bought it quite a while ago, so this was good motivation to give it a try. Really my first airplane build since I was a kid, and back then the goal was to get it done fast. Put a bit more effort into it this time! I thought the overall gloss blue finish would be an easier first choice than the white, intermediate blue, dark blue option.
31 January 2014, 05:37
John Thomas
Good pick, Looking forward to seeing some photos
31 January 2014, 13:46
Wim van der Luijt
Looking forward to see how you fare with this one...have fun!
31 January 2014, 17:53
Clifford Keesler
Do you know if Academey does this one in 1/48th?
25 February 2014, 18:33
John Thomas
I have not seen it in 1:48 From Academey
25 February 2014, 19:20
Jose Miguel Rodriguez
Nice!!!!!!!!!!!!!
25 February 2014, 20:28
Alan Rush
Hi Clifford. In my searching around, I have seen the SB2C-4 in 1/48 by Accurate Miniatures and by ProModeler and I think the SB2C by Monogram, but not the SB2C-4 in 1/48 by Academy.
25 February 2014, 20:47
Alan Rush
Slower progress. See if I make the deadline.
3 April 2014, 03:03
Jose Miguel Rodriguez
Alan in 1/48 I think that the best is Accurate...... Or I´m wrong?
3 April 2014, 03:57
Alan Rush
Could be. I haven't seen that kit. Picked this up in 1/72 because it looked interesting and the price was right.
3 April 2014, 04:10
Rob van Dodewaard
actualy if I am correct the accurate kit is basicaly the promodeler one with some different detail parts(propeller among others). having build the promodelers one i must say that the kit is quit impressive I choose to completely scratchbuild the wheelbay this took a while finishing it but look better than the one in the kit. I think you will enjoy the kit
3 April 2014, 07:49
Karel Struna
looking forward to see more 🙂
3 April 2014, 08:09
Alan Rush
As the clock ticks down I am close to closing the fuselage. The PE interior set and the cockpit mask were not delivered since they were never restocked. It seems they are not available I am hearing. So on I go with botched up instrument decals.
15 April 2014, 04:45
Alan Rush
If this update shows up in your news feed, could you please let me know. In my news feed, sometimes it does and sometimes it doesn't. Not sure what I am doing wrong. I upload the photos, but do I need to make a comment for the album to appear?
16 April 2014, 04:16
Clifford Keesler
I got it Alan.
16 April 2014, 15:02
Clifford Keesler
By the way the bird is looking fantastic.
16 April 2014, 15:03
Rob van Dodewaard
I got it
16 April 2014, 15:13
Alan Rush
Thanks, I am glad it displayed. I put the fuselage together last night but see a couple of loose spots that need to be dealt with.
16 April 2014, 15:24
Jose Miguel Rodriguez
Nice!!!!!!!!!!!!!!!!!!!!
16 April 2014, 15:56
Alan Rush
Thanks Jose. It's coming along.
16 April 2014, 18:40
Alan Rush
Some progress. Attached the wings tonight and soon move to painting.
24 April 2014, 05:00
Alan Rush
Wings are on. Some gaps to fill on tail and on front edge of wings at fuselage but the fit on the Academy kit was pretty good. Critique my crooked lines on my first canopy mask! Thanks Michael, Eric, Lionel, Holger and Clifford for the advice. Not too bad for a first try I suppose. Confident enough to try it on another kit.
26 April 2014, 17:17
Christian Bruer
Well done so far Alan! That will come out nice. Cheers Christian
26 April 2014, 17:45
Alan Rush
Thanks Christian.
26 April 2014, 17:50
Clifford Keesler
It's looking Awesome Alan. Great job. I couldn't build it in 1/72 just to small.Can't see them anymore.
11 May 2014, 00:11
Jose Miguel Rodriguez
Excellent Alan!!! Painting!!!! My favorite part!!!!!
11 May 2014, 00:14
Alan Rush
The deadline has passed and it is not finished. The overall blue is on, but I need many touch-ups. Landing gear, etc. and decals and wash for panel lines. More pictures are coming but start losing grade marks for late sumittal! Thanks for the encouragement.
11 May 2014, 04:58
Gerald
Very Nice work Alan Rush 👍
11 May 2014, 05:14
John Thomas
Alan, nice work
11 May 2014, 11:57
Alan Rush
Finally done. Only a month late. First airplane kit and have likes and dislikes with how it turned out. Thanks for the help with how to finish the canopy by making my own mask. I did press too hard and cut the plastic, so will be more careful next time. I hand painted the interior with Model Master Acryl green zinc chromate and used Model Master Dark Sea Blue spray can for exterior. You can see the egg shell finish from my bad spraying. The decals are from the kit and were a bit thick and didn't settle very well. At the last minute I decided to brush-paint a coat of Future at the end. It helped to cover the scratches on the canopy. Good chance to try the different techniques I have read about here on the site. Give me some honest feedback on the photos to help me for the next time around.
17 June 2014, 03:24
Alan Rush
By the way, the upper antenna IS broken. My clumsy fingers and the last thing to fix. The underwing antennae have been broken off and reattached more times than I can remember.
17 June 2014, 03:30
Jose Miguel Rodriguez
Excellent Alan!!!! The only problem wich I can see in the pictures, if you wish to see a problem is the heavy coat of painting of the model, you can see in picture 32 for example. Why you don´t weathering the aircraft and you don´t make thee panels too. Next time try to make a little lighter the paint in the center of each panel..... 😉 Anyway, I think that you make a good model.
17 June 2014, 05:02
Clifford Keesler
Looks good to me Alan. Did you airbrush it or paint it with a brush? Still looks good.
17 June 2014, 16:35
Alan Rush
Thanks Jose. Yes the paint is thick. It was painted with spray can Clifford. I applied too heavily and had to sand a LOT of it off since it had run and pooled in places. I would have been better off brush painting and better off still if I started using the airbrush that I bought a while ago. Just don't have the set up I want with a compressor and ventilated painting space.
17 June 2014, 17:23
Jens
respectful, very nice details in the small scale 👍
17 June 2014, 17:27
Clifford Keesler
I still haven't quite perfected my airbrush set up either. Tink I am going to have to invest in a new compressor. My old one is very noisey and dances across the floor and overheats a lot. My latest project was sprayed with a can and I am not totally happy with the results either.
17 June 2014, 21:53
Alan Rush
The compressor I have is a giant twin tank for airtools. I bought a regulator and moisture trap to try to convert it. Even if that works it will still only be for use outside. The plan is to give it a try this summer. Let you know if there are any explosions or paint disasters. Not in my budget to buy a hobby size compressor.
18 June 2014, 01:22
John Van Kooten
Great work, Alan! 👍 👍 I don't know how you guys (you aircraft modelers) do it, with all those tiny parts and details! The canopy looks great from where I am sitting! I could not do it, I guarantee it 😛 My respect! 👍 🙂
18 June 2014, 07:18
Alan Rush
Thanks John. I wouldn't call myself an aircraft modeler since this was my first one. Won't say it is my last, but did think about that while building. Out of the few kits I have built, I noticed a huge difference between armour and air. Not exactly sure why, but perhaps it is because you don't have to mask and paint canopies on armour. That one job took a lot of time and patience.
18 June 2014, 15:06
John Van Kooten
I agree! It really is different. I have modeled a few airplanes long ago but I really just couldn't get decent results. I felt it was much harder. The canopy, yes, that was one of the hurdles I was unable to overcome😉 Even though there is the occasional windscreen or view port to mask in armored vehicles, it is just not the same 🙂

I think Jose made an excellent point in maybe trying to do some type of modulation to the individual panels to break the surface? Principle is (somewhat) the same as on armored vehicles but I must admit that to me it looks like a more difficult task on an airplane?😉

But no matter what, you did a great job here! 👍
18 June 2014, 15:29
Frank Krause
👍 Looking good! I like it, Alan. On the photos the canopy looks big, but, I guess, the masking in 1:72 with that little windows must have been hell.
18 June 2014, 15:43
Choppa Nutta
👍
18 June 2014, 16:21
Clifford Keesler
I have the big compressor also, use it for my air tools and painting cars/trucks ze. Am in the process of repainting my 95 Dodge Ram pickup.full si
18 June 2014, 17:12
Clifford Keesler
Wish I knew something about building Armor have never built a tank before only planes cars and ships and spacecraft. I once built a model of the USS Enterprise NCC-1701 and installed fiber optic lights and painted the whole Aztec pattern by hand one panel at a time. That was like in 1984-85
18 June 2014, 17:36
Alan Rush
Why don't you take the plunge and join the Light Tank Groupbuild? Maybe you'll get hooked! I built my own Enterprise a couple of years ago and should post in an album. Did not feel confident enough to take on the wiring for the lights. Do you still have yours? Should post it if you do.
18 June 2014, 17:50
Nikolajs Negeriss
Hi Alan! Very good result for the first plane! As other said, interior is perfect! And remember my first experience with can - had to sand a lot😉 later I learned that I should do quick and short motions with can to get right result... Also I actually found a way how to fix orange peal. I sand it with 1200-2500 grit sand paper and apply Future with wide brush. Another way is to sand, polish and can also apply wax for high gloss.
I like your approach and attitude - great way to learn new things, and I hope to see another plane model from you some day😉 Keep up good work, Alan!
18 June 2014, 18:32
Alan Rush
Thanks Nikolajs. I have more aircraft on the shelf to build. When I looked at your albums in clicked that you had posted your Mig 37 before. That was a great job of painting and finishing.
18 June 2014, 18:50
Clifford Keesler
Alan if you are looking for a Cheap but good airbrush TCP Global makes a dual action airbrush it is called the G-25. It works very nice and is easy to maintain and clean. I think Hunter Cummings has the same airbrush. I only paid 25.00Usd for mine.
18 June 2014, 23:55
Choppa Nutta
now thats good to know, the G-25 by TCP Global !
hope you might post a link of that on my Airbrush review thread for the others to see 🙂
19 June 2014, 00:13
Nikolajs Negeriss
Thank you, Alan, nice to see people get some inspiration from your job😉
In regards to airbrush, I may try to guide you, if you wish - have tried more then 10 guns so far
Clifford, I had a look at G25 on the web. It has 0.2 nozzle. Which kind of paint have you been using so far and what is min and max diameter of pattern you can get from that?
19 June 2014, 07:13

Project info

38 Bilder
1:72
Fertiggestellt
1:72 SB2C-4 Helldiver (Academy 12406)

Group Build

SCM Groupbuild-Naval Aviation in
SCM Groupbuild-Naval Aviation

22. Januar bis 10. Mai 2014

Alle Alben

Alle Alben anzeigen »