Mirage 3 CJ

1
December 7, 2023
I used masking tape and super glue to make the seatbelts. After that I added extra detail to the seat and belt with styrene sheet and wire. I also used stretched sprue.
2
December 7, 2023
Added some buttons to the flightstick with stretched sprue.
3
December 7, 2023
The cockpit had some buttons molded but I added some more. The Gunsight is very basic. I will use it as a base for a scratch build version.
4
December 7, 2023
The base plate for the instrument panel has very low detail. I added as many details I could find with the same material as the ejection seat.
5
December 7, 2023
I removed the glass piece form the gunsight and made a more detailed version. I will add the clear plastic after painting.
6
December 7, 2023
very happy with the result. I hope it will look even better after painting.
7
December 7, 2023
The gear bays are also modified. I also added some riveting
8
January 22, 2024
Many Parts on this kit have pin marks. I did try to clean them up a bit. But the engine ones are not very visible.
9
January 22, 2024
I brush painted all the engine detail becasue it's hard to see.
10
January 22, 2024
I used a metal drybrush and a Brown wash to get a worn effect.
11
January 22, 2024
I cleaned more parts and also filled some pin marks on the landing gear.
12
April 8, 2024
Ejection seat is finished.
13
April 8, 2024
No decals needed. I'm very happy with the modifications.
14
April 8, 2024
I primed some parts of the fuselage already. These need to be painted silver soon.
15
April 8, 2024
Pretty happy with the cockpit till now.
16
April 8, 2024
The gear bays are painted zinc chromate green and I painted the details with some other colours.
17
April 8, 2024
The part behind the seat is also modified to get some more details.
18
April 11, 2024
Very happy with the result.
19
April 8, 2024
I also Added a wash to most parts.
20
April 11, 2024
21
April 11, 2024
The gear bay looks decent with some paint. No scratch building on this part.
22
April 11, 2024
Finished cockpit. I only need to add a clear part for the gun sight.
23
April 13, 2024
I did add some detail to the side walls of the gear bay. Not to much because I want make sure the gear parts fit.
24
April 13, 2024
I couldn't get rid of the ejector pin marks unfortunately. I also added some wires to the front gear leg.
25
April 23, 2024
I painted some parts silver already to make sure I get good coverage in hard to reach parts of the plane.
26
April 23, 2024
The Fit in the rear landing gear bay is decent but the fit on the cockpit Is really bad. It's hard to get it in the right place and there is lots of flash to cleanup. I probably made a mistake here and this causes a bad fit on the windscreen later.
27
April 23, 2024
The overal fit is not great. You need to clean almost every part. I also forgot the nose weight so I added Some behind the cockpit. Hopefully it's enough. I also Added a styrene sheet beneath the antennna part beause it had a large gap. This made filling easier later.
28
April 23, 2024
I'm happy with the gearbay's
29
April 23, 2024
The fit of the wings and belly is bad. Lot's of small gaps.
30
April 23, 2024
After a bit of sanding and filling it's starting to look like a mirage.
31
April 23, 2024
The fit here is really bad and this is probably caused by the bad fit of the cockpit. I hope this filler will be enough.
32
April 23, 2024
I added the Gunsight glass to the instrumentpanel And masked the clear parts. The fit of the windscreen is also not great. Some sanding will be needed.
33
April 23, 2024
I needed some filler on the fin and windscreen.
34
April 23, 2024
I started weatering and detail painting of some of the parts. I used ammo GreenBrown wash. I also added some wire to the rear landing gear legs.
35
April 23, 2024
It's starting to look decent. Almost ready for paint. The canopy is only temporaly fixed for the painting phase. This will be displayed with a open cockpit.
36
April 26, 2024
The ladder for the crew is finished.
37
May 4, 2024
I ones preshaded a metal airplane when I made my mig-15. I wanted to try that again. This time I used gloss varnish before the metallic paint.
38
May 4, 2024
I used Vajello Alluminium as a base. Very happy with the final effect. It's only visible at certain angles.
39
May 4, 2024
I used Dark alluminium for the darker panels. I also decided to paint the nose and some other panels because I don't want to use the decals for those.
40
May 9, 2024
Some more parts are painted I also painted the nose. Most of these parts will be weathered later.
41
May 9, 2024
I painted some more matallic shades by hand on the upper and lower side.
42
May 9, 2024
The decals didn't look very good on the sheet but the preformance was great.
43
May 14, 2024
All decals are applied. The instructions are not clear and some decals are not displayed on the sheet. l also painted the landing lights.
44
May 14, 2024
A Ammo brown green panel line wash is added to the upper and lower side of the plane.
45
May 14, 2024
46
May 14, 2024
I also made some streaks and staining with tamiya black and brown washes.
47
May 14, 2024
I'm happy with the weathering.
48
May 14, 2024
Removing the canopy wasn't a problem. I also used some silver paint to chip the leading edges of the air intakes and the nose.
49
May 15, 2024
The landing gear parts are hard to align but they look decent.
50
May 15, 2024
51
May 15, 2024
The last parts are added and I'm happy.
52
May 15, 2024
The extra cockpit detail payed of.
53
May 15, 2024
54
May 15, 2024
The finished Model. This isn't a easy kit to build and it has strange design choices. It can also use some more detail. But i'm happy with the result.
55
May 15, 2024
56
May 15, 2024
57
May 15, 2024
58
May 15, 2024
59
May 15, 2024
60
May 15, 2024
61
May 15, 2024
62
May 15, 2024
63
May 15, 2024
64
May 15, 2024
65
May 15, 2024
66
May 15, 2024
67
May 15, 2024
68
May 15, 2024
69
May 15, 2024
70
May 15, 2024
71
May 15, 2024

Kommentare

76 7 December 2023, 20:34

Spanjaard
cockpit details look very nice

7 December 2023, 20:56

Vincent
Thanks Spanjaard!

8 December 2023, 13:48

Pierre Pierre
indeed very impressive cockpit, following

9 December 2023, 06:45

Simon
Nice cockpit and ejectionseat! I'm really looking forward to see how it looks painted!

14 December 2023, 21:09

Michael Kohl
Very nice start on this iconic plane.

14 December 2023, 21:43

Michael Kohl
Which version are you going for?

14 December 2023, 21:43

J35J
Great start, following

14 December 2023, 23:24

Rando
I have this kit, looking forward to seeing how it's done!

15 December 2023, 00:23

Vincent
Thanks everyone. I'm going for the silver/red one.

15 December 2023, 05:22

Neil
Following 👍

24 January, 14:15

Mark Sherwood
In! 🤟🥸🤘

9 April, 04:53

Dom SAVE
Really interesting comparison with the Eduard !

10 April, 19:13

Vincent
Thanks Dom! I will see what I can do with this one. I have heard that both kits are not the best.

10 April, 19:28

Dom SAVE
on the Eduard I'm about halfway done. for the moment the nozzle system has been a pain to put in place and I have a few deviations and poor alignment but overall I am quite satisfied. The big subject is the markings since there are interpretations of Eduard like the big white sign on the fin which never existed. But putty is my friend and I won't search for perfection.

11 April, 15:54

Vincent
Well I'm not far into the construction yet. But the details are soft and I can already tell that fitting the cockpit is going to be a pain. But this is one om my favorite planes and I do like some scratch building.

11 April, 18:17

Dom SAVE
An easy kit would be sooo boring lol

11 April, 19:12

bob rivett
looks like the real thing to me.

11 April, 19:18

Vincent
Thanks bob!

12 April, 05:45

Neil
Looking good Vincent! 👍 Sterling work on the cockpit 👏

12 April, 13:59

Mark D
Looking good, quite some labor here. I would also like to build a III with the IDF camo. Following!

24 April, 20:46

Vincent
Thanks mark, its indeed a bit of work. But hopefully it will look fine in the end.

25 April, 22:35

CaptGPF
With this much detailing put into the kit - definitely following!

27 April, 16:29

Thomas Bischoff
nice piece of work you have here 👍

4 May, 17:21

Vincent
Thanks Thomas!

4 May, 23:01

Ben M
👀

5 May, 00:25

Michael Kohl
Coming al8ng really nicely

9 May, 12:36

Vincent
Thanks Michael, It's starting to look decent now!

9 May, 19:52

John
Nice metal finish Vincent! I'm taking notes for mine...

10 May, 00:16

Mark Sherwood
Agree, nice metal finish. I see you used Vallejo Aluminium as a base were the rest of the metallics Vallejo and if so did you experience a long drying time? 🤘🥸🤟

10 May, 04:40

Vincent
Thanks John and Mark!! @Mark no not in my experience. The Vallejo metallic dry pretty fast. I did only use Vallejo metallics.

10 May, 09:28

Mark Sherwood
Thanks for the feedback Vincent. 🤟🥸👍

10 May, 17:43

Mark Sherwood
A nice looking build/finish on a nice looking aircraft. 👍🥸🤟

16 May, 06:33

Neuling
I agree with Mark. And: appealing "show wall"

16 May, 08:15

Mr James
Great finish and a top build

16 May, 09:04

Guy Rump
Very impressive build! 👍

16 May, 10:07

Rando
Fantastic result. Maybe I'll build this one soon!

16 May, 10:45

Vincent
Thanks everyone!!! Good luck Rando. It"s not a easy build! But you can get a decent result.

16 May, 14:44

Rui S
Excellent model 👍

19 May, 13:31

Vincent
Thanks Rui!🙂

19 May, 22:02

BetterTimes-Henry
Very nice Mirage! Well done! Significant amount of scratch built detail, nicely detailed. BTW, great way to display your finished 'in flight' models.

22 June, 22:38

Vincent
Thanks Henry!! This kit does need some extra detail and nice to see you like it🙂

24 June, 01:52

Album info

I really like this plane and wnted to make one for a long time.
This kit looks decent and I'm going to try and add scratch build detail.

modifications:
- Scratch build seatbelts
- Added detail in the cockpit.
- Added detail to the ejection seat.
- Added detail to HUD.
- Added detail to gear bay.

Mirage III CJ HobbyBoss

71 Bilder

1:48

Fertiggestellt

Dassault Mirage IIICJ

Heyl Ha'Avir (Israeli Air Force 1948-now)
119 Tayeset (Bat) Sqn. 778

Alle Alben

Alle Alben anzeigen »