modelářská databáze | správa kitníku
Comrade Katya
Katya Hodgson (Comrade Katya)
GB

1/48 J-29F construction

Komentáře

17 February 2019, 15:00
Katya Hodgson
This thing is possibly the cutest jet I have ever seen.
17 February 2019, 16:15
Soeren R.
Its a really nice kit.
Finished mine a few weeks ago:
J-29 F Saab Tunnan - Hobby Boss 1/48 - Finished | Album by Floppar (1:48)
17 February 2019, 16:29
Lost_Erik
👍
17 February 2019, 16:35
Katya Hodgson
Looks great Sören! I'm going to be doing the original Swedish markings version. 🙂
17 February 2019, 16:47
Katya Hodgson
Due to being a particularly nasty tail sitter, this is on hold until I can get some lead weights to go in the nose.
18 February 2019, 07:38
Soeren R.
It is, even with a lot of weight in the nose.
Best way to prevent this is with a base (from Coastal Kits for example) and glue the wheels on the base - Drill a hole in the base & the wheels and put a wire through it (from a paperclip for example) and then glue it with superglue
18 February 2019, 07:42
Katya Hodgson
Oh... I don't have a base or anything like that, I was hoping I could just get a lead weight and put it in the nose. Will that not work then? 🙁
18 February 2019, 07:43
Soeren R.
I thought I had enough weight in it (there was no space left), but the Tunnan still ended up as a tail sitter.
Maybe you have more luck with it.
18 February 2019, 07:50
Katya Hodgson
Oh... I don't have much space either, I had to pull out the nose intake assembly so I could push weight through the hole...
18 February 2019, 07:52
Katya Hodgson
It needs two weights but I could barely fit one. 🙁
18 February 2019, 13:55
Katya Hodgson
Think I might just have to stick it down to something. 🙁
18 February 2019, 14:30
Katya Hodgson
Been away from the computer, so here is today's progress all at once.
18 February 2019, 18:27
Katya Hodgson
Red highlights painted, lights and wheels fitted. Once the glue sets on the wheels it'll be ready for the first clearcoat!
18 February 2019, 19:18
Katya Hodgson
Wheels seem to hold up, I have just applied the first clear coats. Once they dry it will be ready for decals!
18 February 2019, 19:54
Katya Hodgson
Decals are all on! I'll leave them overnight to dry and then add the final clear coat tomorrow, before unmasking the canopy. Then it should be done!
18 February 2019, 22:46
Augie
cute little flying barrel 🙂
18 February 2019, 23:04
Clifford Keesler
Very nice job.
19 February 2019, 00:22
Soeren R.
Looking good, but you should really think about using some filler for the next kits - like Vallejo Putty or Mr Surfacer from Gunze
19 February 2019, 05:48
Katya Hodgson
I did use some filler? What do you mean?
19 February 2019, 08:01
Soeren R.
I mean the lines of the body, where you glued both parts together.
Best to see from the red ring of the nose to the canopy or on the bottom of the full length.
19 February 2019, 09:32

Album info

Construction of Hobbyboss 1/48 J-29F Tunnan

32 obrázky
1:48
Dokončeno
1:48 J-29F Tunnan (HobbyBoss 81745)1:48 J-29 Tunnan (Eduard EX499)
Saab J 29F Tunnan
SE Svenska Flygvapnet (Swedish Air Force 1926-now)
F20 20/S
Silver
 

Všechna alba

Zobrazit všechna alba »