Junkers Ju87 B-2/R-2 Stuka - WIP

1
May 14, 2012
I started with the cockpit, straith from the box. No extras were added.
2
May 14, 2012
I started with the cockpit, straith from the box. No extras were added.
3
May 14, 2012
I started with the cockpit, straith from the box. No extras were added.
4
May 14, 2012
Next the cockpit was fixed in the fuselage. I chose to accentuate the panel lines quite heavily.
5
May 14, 2012
The panel lines will be preshaded, a job I'm kinda afraid of, so Guido will come at my place to help me and show how it's done.
6
May 14, 2012
Next up are the wings. Same procedure for the panel lines. Fitting the upper wing and bottom wing parts didn't go so easily.
7
May 14, 2012
Because of this difficult fit, I have to sand quite a lot at the wing extremes. On top of that part of the plastic of the right bottom wing wasn't injected completely. So I decided to cut off the flaps, prepare the wings properly, and re-attach them.
8
May 14, 2012
The nose-cone with propellor dryfitted. This is a tricky sub-assembly with lots of small parts forming the nose once assembled.
9
May 14, 2012
Dryfit of the fuselage with the wings and the nose-cone. Still some more filling and sanding to be done it seems.
10
May 14, 2012
Dryfit of the canopy. I will propably fix it in closed position, since I didn't add any details to the interior. My next airplane will receive more interior detail.
11
May 27, 2012
First image of the repaired Stuka; the battle damage should be gone, or at least made invisible to the eye 😉
12
May 27, 2012
Guido came at my place to show me how preshading should be done, or at least how he does it; we're not sure if the 'real' airplane builders to it the same way, but this seems to work for us...
13
May 27, 2012
Top of the airplane was preshaded with flat black, the bottom was doen with a dark grey. Next were the wing tips and the strip around the tail, which should be yellow, so we decided to give them a white primer coat first.
14
May 27, 2012
Top of the airplane was preshaded with flat black, the bottom was doen with a dark grey. Next were the wing tips and the strip around the tail, which should be yellow, so we decided to give them a white primer coat first.
15
May 27, 2012
Next up: the yellow areas such as the tail and the bottom wing tips.
16
May 27, 2012
Next up: the yellow areas such as the tail and the bottom wing tips.
17
May 27, 2012
Next up: the yellow areas such as the tail and the bottom wing tips.
18
May 28, 2012
Here the Tamiya AS-5 light blue has been decanted from the rattle can to the airbrush, and then diluted with Tamiya Lacquer Thinner. It was airbrushed on the plane very carefully.
19
May 28, 2012
Here the Tamiya AS-5 light blue has been decanted from the rattle can to the airbrush, and then diluted with Tamiya Lacquer Thinner. It was airbrushed on the plane very carefully.
20
May 28, 2012
Here the Tamiya AS-5 light blue has been decanted from the rattle can to the airbrush, and then diluted with Tamiya Lacquer Thinner. It was airbrushed on the plane very carefully.
21
May 28, 2012
After a few hours of careful masking, I think the model is ready to be painted it's camouflage scheme...
22
May 28, 2012
This is the challenge: transform this side to a realistic looking aeroplane...
23
June 3, 2012
24
June 3, 2012
25
June 3, 2012
26
June 3, 2012
27
June 3, 2012
28
June 3, 2012
29
June 3, 2012
30
June 3, 2012
31
June 3, 2012
32
June 3, 2012
33
June 3, 2012
34
June 3, 2012
35
June 3, 2012
36
June 3, 2012
37
June 3, 2012
38
June 3, 2012
39
June 3, 2012
40
June 3, 2012
41
June 3, 2012
42
June 3, 2012
Unfortunately, the Stuka has crashed in a million pieces, and I can't even find all the missing parts anymore to restore it. Shit happens. The project looked as if it were terminated. However, after some time to recover, I managed to repair the damaged pa

Komentáře

14 May 2012, 11:57

Dave Flitton
You have done some really good work. Is this a Tamiya original or an Italeri rebox?

14 May 2012, 12:35

Guy Golsteyn
Definitely an Italeri rebox, it's indicated on the box art.

14 May 2012, 13:58

Holger Kranich
Its used to be said thats its a good kit, can you confirm? Nice and clean build, so far!

14 May 2012, 14:26

Holger Kranich
Thanks fo the info, Guido! Are the panellines as huge as they look on the pix?

14 May 2012, 14:57

Aghis Barberopoulos
As Holger said, the panel 'lines' are huuuuge, better fill 'em up completely ! 😉

14 May 2012, 15:26

stefan natus
So we are in for a surprise here,looks good so far.

14 May 2012, 16:04

Guy Golsteyn
@Holger: a good kit? I wouldn't say so. The fuselage parts fit well, but the wings don't. It's so bad that I had to cut off the flaps in order to be able to sand the wing parts into shape. On top of that, something weird is going on with the plastic: it splits in fine layers when you try to scribe or cut in the material. I've never seen that before. So scribing fine panel lines was impossible, because it caused splitting the plastic and I had to sand the bad plastic away. Scribing deeper seemed to help. That's why the lines are so huge. But we're going to try to improve things with the paintjob. After all, this model is just another guinea pig to try out some stuff; I'm far away from the skill level I reached in car modeling. I'm certainly aware of that 😉

15 May 2012, 07:55

Holger Kranich
Hey Guy, thanks for explaining your problem. Had a similar problem with an Revell M7 (Italeri rebox). Fortunately the materialthickness and scale didnt made the scribing a problem, but was not nice to clean the scribed areas. I solved the problem with grinding my self a scriber from an old needle.

But keep on learning and im convinced the Stuka will become great!

15 May 2012, 08:22

Holger Kranich
Is Guido working on this one, too?

15 May 2012, 08:26

Guy Golsteyn
He is helping me out when I'm stuck(a) 😉

15 May 2012, 09:02

Burkhard D
@Guy: Brittle material doesn't lend itself well to scribing, but splintering also is a function of pressure applied and the shape of the scriber. Also makes a difference whether one is scribing new panel lines or reworking existing lines.

15 May 2012, 09:05

Guy Golsteyn
Unfortunately, the Stuka has crashed in a million pieces, and I can't even find all the missing parts anymore to restore it. Shit happens. This project is terminated.

16 May 2012, 20:49

Holger Kranich
WTF! Sorry for that! Hmmm, sometimes, shit hits the fan... Do you plan to build a new Stuka in the future?

16 May 2012, 20:59

Wilfried Bogaerts
🙁

16 May 2012, 21:38

Burkhard D
A Spitfire has been observed circling the area... 😉

17 May 2012, 08:59

Guy Golsteyn
Well, i pulled myself together today and i tried to scratchbuild the missing parts. The stuka has been re-assembled now, although it doesn't look as sharp as before. But at least it will be built and finished, and the result will always remember me of the big crash of may 16th...

17 May 2012, 17:30

Aghis Barberopoulos
Hehe, it's the famous play dead ploy 🙂

17 May 2012, 18:08

Guy Golsteyn
It's alive again! We can go on with this build 😉

27 May 2012, 16:57

Holger Kranich
Awesome, thats great to hear!!! I hope you can progress now, without any incidents!🙂🙂🙂

27 May 2012, 18:46

Guy Golsteyn
The bottom of the Stuka has been airbushed by Guido showing me how it's done. Thanks mate, that was a great demo, and all it costed me was a piece of lasagna and 5 metal pins for the Cobra 😉 I hope I can continue the job without ruining the model...

28 May 2012, 07:34

Holger Kranich
You both will do it! And for a piece of lasagna, i would have showed you how to brush it, too;)

28 May 2012, 08:26

stefan natus
Nice lessons it looks great.

28 May 2012, 09:00

Guy Golsteyn
I'm gonna try my best; the masking has been done anyways. The painting will have to wait until tomorrow though, because now I 'have to go' to a BBQ 😉

28 May 2012, 10:37

Holger Kranich
Hmmm, i´m getting hungry...;)! Have fun!

28 May 2012, 11:03

Guy Golsteyn
I've been spraying a lot since my last update, but since SM has been down for a while, I didn't get the chance to upload any pics. Now you get the whole lot

Currently I'm kinda stuck though, because the kit doesn't have any 'swastika' decals. I could understand this as a sort of censor action, but the odd thing is that my other 2 German WW2 Tamiya airplane kit, a Messerschmidt and a Focke Wulf, do have swastika decals. Weird.

Anyway, the missing decals have been ordered; it's just a matter of days. In the meantime I have fun with my Ferrari 126 CK kit 😉

3 June 2012, 20:55

Project info

Junkers Ju87 B-2/R-2 Stuka

58 obrázky

1:72

Dokončeno

1:72 Junkers Ju87 B-2/R-2 Stuka (Tamiya 60776)

Všechna alba

Zobrazit všechna alba »