F-16cg 1/72 flying pose

1
August 2, 2023
I got giffed this kit but it was already started. so I had to use a spare ejection seat for a mirage f1 set. This kit looks like decent fun and has a lot of options for weapons and other systems. I will probably use the wasp decals for the final model.

Modifications:
- Mirage f1 ejection seat due to missing pieces.
- Revell f-16D pilot figure.
- Retracted landing gear due to missing front landing gear leg.
2
August 2, 2023
The mirgae ejection seat doesn't fit to bad and I hope It also fits with the canopy closed. I won't glue it until I know for sure
3
August 2, 2023
I Used I light grey oil paint dry brush to highlight the black parts of the cockpit.
4
August 14, 2023
The white inner parts are weathered. This was done before I realised I needed to build it with gear up.
5
August 14, 2023
The engine is also white and has also been weathered. The fit of the fuselage and wings is decent but it needs some filling along the seem lines.
6
August 14, 2023
There are holes on both sides of the engine area that dont get covered up during constructions. I decided to fill these with styrine sheet and filler.
7
August 14, 2023
The AN/AAQ-33 Sniper pod is compelely empty inside and the glass piece is pretty clear. So I added some sensor detail inside.
8
September 5, 2023
I discoverd that more pieces where missing during the construction. So I changed my vision of this project. The forn landing gear is missing and I decided that I'm going to try building this I flying pose and make a senic basse for it Like I did with the bf-109e. So I needed a Pilot. I bought a revell f-16d and used the pilot figure form that kit. I used revell paint and clear varnish for the painting of the figure.
9
September 5, 2023
The weapons and fuel tanks are painted and weathered and the ladning gear covers can be glued in closed position without many problems even when the kit is not really designed for it.
10
September 5, 2023
I masked the canopy after I fitted the ejection seat and pilot. The gap between the canopy an back window is filled clear fix from Revell. I also primed the plane balck for a preshading effect.
11
September 5, 2023
I used insignia white for the preshading.
12
September 5, 2023
The first layer is sky grey. I applied this to the underside, pylons and the vertical stabiliser
13
September 5, 2023
Gunship grey is added to te top of the elevators and the fuselage. I applied this in thin coats to try and keep the preshaded effect. Very happy with the result till now.
14
September 5, 2023
I masked of the sides of the back fuselage to and more sky grey and I masked of the radome and used USN grey for mister hobby to get a different tint on the nose cone. I'm very happy with the result. I hope the preshading will show trough to the end after all the weathering layers.
15
September 8, 2023
Decals where great. I chose the stinger scheme because of the wasp decal.
16
September 8, 2023
Final work on the ordinace and weapons.
17
September 8, 2023
I used a dark brown wash from ammo on the whole plane.
18
September 8, 2023
I also used a bit of medium tan wash to make some dusty panel effects.
19
September 8, 2023
I made this choice for the stand. This does stop me form using the central fuel tank. but I will use the ECM pod instead.
20
September 8, 2023
The base is made from model and food boxes. I used toilet paper as terain paste and cat litter as stones.
21
September 8, 2023
I used filler on the sides and primed everything black.
22
September 8, 2023
Frist step is Preshading with tamiya buff. second I used sand yellow as a blend layer. 3rd layer is dark earth mixed with dark brown for the dark and low parts. I finished the ground work of with a africa sand dry brush.
23
September 8, 2023
The stand is added.
24
September 8, 2023
I really like the dynamic pose. although it's not realistic
25
September 8, 2023
This kit really has many options in the box and I decided to make some more weapons I had left from other kits. I hope to use these in future projects. I decided to go for a f-16cg ground strike loudout.
26
September 8, 2023
U used some Oil paint weathering for a dusty effect and some oil streaking. Also smoke effects on the gun and some air vents.
27
September 8, 2023
I used the streched sprue for the static dischargers.
28
September 8, 2023
I added some static grass on the base. I used a light green and dry tan grass.
29
September 8, 2023
I decided to blend the static grass with sand yellow paint and also used a flat varnish to unite the base.
30
September 8, 2023
Loadout is added I also painted the stand with gloss black.
31
September 8, 2023
The jet nossle is not my best work. I reused masking tape and some residue was left on the metal paint. I used some brown wash to blend it a bit.
32
September 8, 2023
The canopy mask did work fine even with the black decals around the frames. I really like the result.
33
September 8, 2023
Final result. Really happy what with the improvements I made especially with the paint finish and weathering. I Still need to improve some things in the future like removing the canopy seam line and the jet nossle paint finish. But the result I got with a kit that was already started and was missing some pieces is really encouraging. I hope you guys like it🙂
34
September 8, 2023
35
September 8, 2023
36
September 8, 2023
37
September 8, 2023
38
September 8, 2023
39
September 8, 2023
40
September 8, 2023
41
September 8, 2023
42
September 8, 2023
43
September 8, 2023
44
September 8, 2023
45
September 8, 2023
46
September 8, 2023
47
September 8, 2023
48
September 8, 2023

Comments

38 2 August 2023, 11:59

Juskifo
Thanks to you Vincent for the pedagogy and the technique around
this assembly of the F-16 and its diorama
It is one of the most realistic F-16 I have seen at this scale. Kudos to you 👏

8 September 2023, 13:02

Clement
I really like your model and display, very dynamic!

I feel like you should have spent the €5 to get an F-16 seat. It's so visible with that big canopy and the ACES II seat looks nothing like a MB mk4.

8 September 2023, 13:03

Juskifo
Thanks to you Vincent for the pedagogy and the technique around this assembly of the F-16 and its diorama
It is one of the most realistic F-16 I have seen at this scale.
Kudos to you 👏

8 September 2023, 13:04

Vincent
Thanks Clement And Juskifo. And indeed I maybe should have been more pacient and bought a new ejection seat. But I wasn't planning to take this much time and effort on this project at the start. But that changed along the way. I'm not going to try and remove the canopy and risk the finish I got. I still like the result I got and I now have the Revell f-16d to try and do It again. I hope the quality of that kit is close to this one.

8 September 2023, 13:25

Arif Saeed
Very nice work 👏👏

9 September 2023, 09:43

Vincent
Thanks Arif!!

9 September 2023, 19:15

Daniel
I like the shading + satin finish very much👍🏻

10 September 2023, 08:46

Robert Podkoński
Awesome!

10 September 2023, 08:49

Vincent
Thanks Daniel and Robert!!!

10 September 2023, 10:40

Album info

I got gived this kit but it was already started. so I had to use a spare ejection seat for a mirage f1 set. This kit looks like decent fun and has a lot of options for weapons and other systems. I will probably use the wasp decals for the final model. I discoverd more missing pieces during the Build. The front landing gear is also lost. I dicided to try and make this kit in flying pose with a base like I did with the bf-109E build.

Modifications:
- Mirage f1 ejection seat due to missing pieces.
- Revell f-16d Pilot.
- Retracted landing gear due to missing front landing gear leg.
- added static dischargers.

F-16C Academy

48 images

1:72

Completed

1:72 Air National Guard F-16C (Academy 12425)

General Dynamics F-16C Block 42F Fighting Falcon

US Air Force (1947-now)
112 FS Stingers, 180 FW, Ohio ANG 89-2098 (Col. Tom "T-Shirt” Schart)

FS36118 FS36270 FS36231

All albums

View all albums »