Junkers EF 128 - Huma - - Finished

Comments

23 August 2015, 18:31

Christian Meyerhoff
Aber Hallo! Da bin ich doch dabei! 🙂

23 August 2015, 19:25

Soeren R.
Freut mich 🙂
War ne spontan Idee weil ich ein kleines und einfaches Modell bauen wollte😉

23 August 2015, 19:39

Christian Meyerhoff
Passt schon. Ich habe schon einige Huma`s gebaut und schaue Dir deswegen gerne mal über die Schulter.

23 August 2015, 19:48

Soeren R.
Ich bin jetzt erst wirklich auf Huma gestoßen, nachdem ich mir die Ju 288 und die 287 bei meinem Shop geholt habe. 🙂

24 August 2015, 04:38

Christian Meyerhoff
Na dann hau mal rein!

24 August 2015, 06:13

Soeren R.
🙂 Ja, werde den Bausatz jetzt auch direkt nach der 1099 anfangen und die I-16 erst Mal bisschen nach hinten schieben.

24 August 2015, 06:15

Holger Kranich
Huma, huma, huma täterääää, täteräääää😢
Ich bin dabei!

24 August 2015, 06:52

Soeren R.
👍 Gerade auf der Suche nach den anderen What If Humas.
Finde die Bausätze haben schon was und die kleinen sind ein schönes zwischendurch Projekt! 🙂

24 August 2015, 06:56

Martien Lourens
Nice .

24 August 2015, 08:07

Soeren R.
I really hope it will be nice in the end too 😛

24 August 2015, 08:16

Martien Lourens
Ein bisschen mehr Selbstvertrauen .......🙂

24 August 2015, 08:32

Soeren R.
Ich doch immer😉, aber erst nach sagen wir 10-15 vernünftig gebauten Kits 😛

24 August 2015, 08:32

Jan vdM
Da bin ich auch mal gespannt was du daraus machst.

24 August 2015, 12:34

Soeren R.
Da sind wir 2 😛

24 August 2015, 12:41

Miro Herold
Ein schräger Vogel, aber hübsche Figur. 😉)

24 August 2015, 12:50

Soeren R.
The cockpit without anything is almost done.
Little bit of dry-brushing and a clear coat and I think its done.

2 September 2015, 19:22

Kerber
nice subject...I'm following!

2 September 2015, 19:33

Soeren R.
Managed to do a little bit of progess today!
Next step is finishing the cockpit and then comes the marriage between the 2 body parts!

13 September 2015, 17:08

Christian Meyerhoff
That looks very promissing! Do You have any ideas about the camo so far?

13 September 2015, 17:16

Soeren R.
Thx Christian!
I will probably paint it in the camo from the box - so nothing special there! 🙂

13 September 2015, 17:26

Christian Meyerhoff
Well, I think that a bare metal finish would look nice on this one.

13 September 2015, 17:34

Soeren R.
Could be a good idea! I will think about that!😉

13 September 2015, 17:40

Christian Meyerhoff
As I have this kit in my stash as well I plan to do it that way. The mixture of bare metal and wood is very interesting in my opinion.

lexikon-der-wehrmacht.de/Waffen/EF128.htm

Painting the model this way would be a nice addition to Your Horten.

13 September 2015, 17:48

Soeren R.
True, but Im also thinking of making a EF 128 in the markings of the JG 400, because my Ho 229, my P.1099 and the upcoming 163 will have their markings.

13 September 2015, 17:57

Christian Meyerhoff
It`s up to You, have fun! 🙂 BTW... What 163 are You talking about?

13 September 2015, 18:06

Soeren R.
It is only a "idea" till now, but it will be the Academy kit.

13 September 2015, 18:07

Christian Meyerhoff
It`s a great kit. I built several of them in the past.

13 September 2015, 18:37

Soeren R.
Thats really great to hear, because Ive two of them in my stash! 🙂

13 September 2015, 18:40

Soeren R.
The cockpit is now ready and the main parts are glued together.
Next step is glueing the wings and then some filling! 🙂

8 October 2015, 17:39

Wim van der Luijt
Looks good, I love Luft '46 stuff, this looks like a nice little kit

8 October 2015, 18:03

Soeren R.
Thx Wim!
Yeah it is really nice but also really basic! 🙂
So a good kit in between

8 October 2015, 18:06

Soeren R.
The wings are only dry fitted, because I stll need to fill and sand some spots on the body

10 October 2015, 21:23

Soeren R.
The fit of the canopy is sadly nowhere near great... I probably need to sand some parts after I filled and sand the spots between wing and body.

11 October 2015, 08:11

Nils Steyaert
following 🙂
looks great, ive been looking to start on this kit myself.

11 October 2015, 08:55

Soeren R.
Thx Nils 🙂

11 October 2015, 09:54

Soeren R.
First layer of primer down.
Next step is now to fix some gaps etc. and then prime this spots again.

11 October 2015, 15:40

Christian Meyerhoff
This one will come out very nice! As I always had a week spot for Huma kits, this one is no exception. Keep on like this!

11 October 2015, 17:09

Christian Ristits
Great, nice little fighter, looks good!

11 October 2015, 17:41

Christian Bruer
The fuselage looks a little bit like a Vampire. Nice and sharp work Soeren!

11 October 2015, 17:44

Soeren R.
THX mates 🙂

11 October 2015, 17:50

Soeren R.
The kit got his primer, but still have to fill some little spots and after that comes the paint job 🙂

24 January 2016, 11:34

Burkhard D
I notice you are switching from rampant buyer into rampant builder mode 😄 👍👍👍

24 January 2016, 13:05

Soeren R.
Haha 🙂 Yeah, if I want to build my stash in my life time. Ive to start somewhere. 😄

24 January 2016, 13:25

Ben STONE
I've always liked this plane, interested to watch.

24 January 2016, 20:39

Soeren R.
Its a nice little kit.
Of course it has some flaws, but nothing serious 🙂

24 January 2016, 20:58

Soeren R.
Bottom color down and the pre-shading is still a little bit visible.
I think that should do it 🙂

25 January 2016, 16:49

Soeren R.
FIrst top color down.
Next step is now to mask it for the second color.

1 February 2016, 19:16

Hanno Kleinecke
The shades come out nicely !

1 February 2016, 19:39

Soeren R.
Thx a lot Hanno 🙂
I hope the shades will be still visible after I sprayed the brown parts, but I think I will re-spray them before I paint the spots brown. 🙂

1 February 2016, 19:42

MRMLA
Seems to be very interesting subject! 👍

1 February 2016, 21:41

Soeren R.
It really is and also a nice little kit 🙂

2 February 2016, 05:53

Cristian Bordina
Great job so far, I follow 🙂

2 February 2016, 07:26

Soeren R.
Thx a lot Cristian. 🙂
I hope it will look still good, after the brown was painted.

2 February 2016, 09:36

Cristian Bordina
I'm sure yes !!!😉

2 February 2016, 09:48

Martien Lourens
The production also begins to run with you 🙂🙂. Nice little plane, Soeren

2 February 2016, 12:57

Soeren R.
Thx Martien 🙂
I hope I will finish more kits this year than 2015 😛

2 February 2016, 13:04

Soeren R.
Paintjob is done.
Now a coat of clear to prepare the kit for the decals 🙂

Im quite happy with the result so far, even it wasnt the easiest build.

2 February 2016, 19:09

Christian Meyerhoff
One of the best Huma builds I`ve seen so far! Please use aftermarket decals and not the crude ones that come with the kit. 👍

2 February 2016, 20:35

arne vd burg
It looks very good Soeren !

2 February 2016, 20:36

Soeren R.
Thank you both 🙂
@Christian
I must have a look , if i find some fitting decals (maybe from by Ho 229 build)

2 February 2016, 21:01

Christian Meyerhoff
It`s Luft `46 so all You need are some "Balkenkreuze" No big thing I think 🙂

2 February 2016, 21:14

Soeren R.
Thats true 🙂

2 February 2016, 21:18

Andre Hoencher
Looks good. 👍

2 February 2016, 22:40

Soeren R.
Thx Andre😉

3 February 2016, 05:20

Burkhard D
Wouldn't it have been better to paint the vertical tailplanes before assembly?

3 February 2016, 11:04

Soeren R.
It probably would, but I need some filler between the wing and the tailplane.
And it also worked out this way in the end😉

3 February 2016, 11:24

Kerber
Hehehe...nice, very nice!

3 February 2016, 21:31

Erik Leijdens
Looking good Soeren, excellent paint job 👍

3 February 2016, 22:06

Soeren R.
Thx mates😉

3 February 2016, 22:15

Soeren R.
FIrst layer of clear is now sprayed. Next step are the decals, but I still need to look for some better decals than the kit decals - which are crap!

4 February 2016, 05:16

Bulldog Scale Models
Nice work Soeren.

4 February 2016, 05:28

Soeren R.
Thank you Antonio.
Im also happy with the result so far.😉
A few weeks backs, I was considering to throw this kit away.....

4 February 2016, 05:34

Wim van der Luijt
Looking good! I like Luft'46 stuff a lot, you can do whatever you like. Hope you can source some decent decals for this bird

4 February 2016, 09:07

Soeren R.
Thx Winn😉
I think that Ive found some good ones for that.
Luckily I still have a second sheet for the Ho 229 from Revell and those decals should fit for this kit.

4 February 2016, 09:21

Soeren R.
Decals are now done. I ordered "Balkenkreuze" from Techmod and used those.

6 February 2016, 21:10

Christian Meyerhoff
Techmod is always a goog choice when it comes to German markings. I like this stuff!

6 February 2016, 21:21

Soeren R.
Thats true.
And they were really great to use.

7 February 2016, 08:22

Soeren R.
Finished! 🙂

7 February 2016, 18:26

Soeren R.
Its still has some flaws but nothing really serious and which will be prevented next time😉
And please excuse the dust, but the Alclad Klear is a bit magnetic or whatever ..... 😛

7 February 2016, 18:29

Ekki
Very well done. Excellent.

7 February 2016, 18:31

Andre Hoencher
Very nice. 🙂

7 February 2016, 18:34

Soeren R.
Thx mates😉

7 February 2016, 18:36

Christian Meyerhoff
Well Soeren, as some people may know I`m a big fan of these kits made by HUMA. Your model is one of the best I`ve seen so far! Excellent work! 👍 👍 👍

7 February 2016, 19:14

Soeren R.
Thank you Christian 🙂

7 February 2016, 19:22

Hanno Kleinecke
Great looking result Soeren .

7 February 2016, 19:25

Soeren R.
Thx Hanno😉

7 February 2016, 19:43

Ben STONE
Nice work Soeren.

8 February 2016, 01:54

Soeren R.
Thank you Ben. 🙂

8 February 2016, 04:48

arne vd burg
very nice